rpcgen man page on ElementaryOS

Man page or keyword search:  
man Server   4994 pages
apropos Keyword Search (all sections)
Output format
ElementaryOS logo
[printable version]

rpcgen(1)							     rpcgen(1)

NAME
       rpcgen - an RPC protocol compiler

SYNOPSIS
       rpcgen infile
       rpcgen [-Dname[=value]] [-T] [-K secs] infile
       rpcgen -c|-h|-l|-m|-M|-t [-o outfile ] infile
       rpcgen [-I] -s nettype [-o outfile] infile
       rpcgen -n netid [-o outfile] infile

DESCRIPTION
       rpcgen  is  a  tool that generates C code to implement an RPC protocol.
       The input to rpcgen is a language similar to C known  as	 RPC  Language
       (Remote Procedure Call Language).

       rpcgen  is  normally  used  as  in the first synopsis where it takes an
       input file and generates up to four output files.   If  the  infile  is
       named  proto.x, then rpcgen will generate a header file in proto.h, XDR
       routines in proto_xdr.c, server-side stubs in proto_svc.c, and  client-
       side  stubs in proto_clnt.c.  With the -T option, it will also generate
       the RPC dispatch table in proto_tbl.i.  With the -Sc  option,  it  will
       also generate  sample code which would illustrate how to use the remote
       procedures  on  the  client  side.  This	 code  would  be  created   in
       proto_client.c.	 With  the  -Ss option, it will also generate a sample
       server code which would illustrate how to write the remote  procedures.
       This code would be created in proto_server.c.

       The  server created can be started both by the port monitors (for exam‐
       ple, inetd or listen) or by itself.  When it is started by a port moni‐
       tor,  it	 creates  servers  only	 for  the transport for which the file
       descriptor 0 was passed.	 The name of the transport must	 be  specified
       by setting up the environmental variable PM_TRANSPORT.  When the server
       generated by rpcgen is executed, it creates server handles for all  the
       transports  specified  in  NETPATH  environment	variable,  or if it is
       unset, it creates server handles for all the  visible  transports  from
       /etc/netconfig  file.   Note: the transports are chosen at run time and
       not at compile time.

       When built for a port monitor (rpcgen -I), and that the server is self-
       started,	 it  backgrounds  itself  by default.  A special define symbol
       RPC_SVC_FG can be used to run the server process in foreground.

       The second synopsis provides special features which allow for the  cre‐
       ation  of  more sophisticated RPC servers.  These features include sup‐
       port for user provided #defines and RPC dispatch tables.	  The  entries
       in the RPC dispatch table contain:
	      ·	 pointers  to the service routine corresponding to that proce‐
		 dure,
	      ·	 a pointer to the input and output arguments
	      ·	 the size of these routines
       A server can use the dispatch table to check authorization and then  to
       execute	the  service routine; a client library may use it to deal with
       the details of storage management and XDR data conversion.

       The other three synopses shown above are used when one does not want to
       generate	 all  the output files, but only a particular one.  Some exam‐
       ples of their usage is described in the EXAMPLE	section	 below.	  When
       rpcgen is executed with the -s option, it creates servers for that par‐
       ticular class of transports.  When executed with the -n option, it cre‐
       ates  a	server for the transport specified by netid.  If infile is not
       specified, rpcgen accepts the standard input.

       The C preprocessor, cc -E [see cc(1)], is run on the input file	before
       it  is  actually	 interpreted by rpcgen.	 For each type of output file,
       rpcgen defines a special preprocessor symbol for use by the rpcgen pro‐
       grammer:

       RPC_HDR	   defined when compiling into header files
       RPC_XDR	   defined when compiling into XDR routines
       RPC_SVC	   defined when compiling into server-side stubs
       RPC_CLNT	   defined when compiling into client-side stubs
       RPC_TBL	   defined when compiling into RPC dispatch tables

       Any  line  beginning  with `%' is passed directly into the output file,
       uninterpreted by rpcgen.

       For every data type referred to in infile, rpcgen  assumes  that	 there
       exists a routine with the string xdr_ prepended to the name of the data
       type.  If this routine does not exist in the RPC/XDR library,  it  must
       be  provided.  Providing an undefined data type allows customization of
       XDR routines.

       The following options are available:

       -a     Generate all the files including	sample	code  for  client  and
	      server side.

       -b     This  generates  code  for  the SunOS4.1 style of rpc. It is for
	      backward compatibility.  This is the default.

       -5     This generates code for the SysVr4 style of rpc. It is  used  by
	      the  Transport  Independent  RPC	that  is  in Svr4 systems.  By
	      default rpcgen generates code for SunOS4.1 stype of rpc.

       -c     Compile into XDR routines.

       -C     Generate code in ANSI C. This option also	 generates  code  that
	      could be compiled with the C++ compiler.	This is the default.

       -k     Generate code in K&R C.  The default is ANSI C.

       -Dname[=value]
	      Define  a	 symbol	 name.	Equivalent to the #define directive in
	      the source.  If no value is given, value is defined as 1.	  This
	      option may be specified more than once.

       -h     Compile  into C data-definitions (a header file).	 -T option can
	      be used in conjunction to produce a header file  which  supports
	      RPC dispatch tables.

       -I     Generate	a service that can be started from inetd.  The default
	      is to generate a static service that handles transports selected
	      with -s.	Using -I allows starting a service by either method.

       -K secs
	      By default, services created using rpcgen wait 120 seconds after
	      servicing a  request  before  exiting.   That  interval  can  be
	      changed  using the -K flag.  To create a server that exits imme‐
	      diately upon servicing a request, -K 0 can be used.  To create a
	      server that never exits, the appropriate argument is -K -1.

	      When  monitoring	for  a	server,	 some  portmonitors, like lis‐
	      ten(1M), always spawn a new process in  response	to  a  service
	      request.	 If it is known that a server will be used with such a
	      monitor, the server should exit immediately on completion.   For
	      such servers, rpcgen should be used with -K -1.

       -l     Compile into client-side stubs.

       -m     Compile  into  server-side  stubs,  but do not generate a “main”
	      routine.	This option is useful for doing callback-routines  and
	      for  users who need to write their own “main” routine to do ini‐
	      tialization.

       -M     Generate	multithread-safe  stubs	 for  passing  arguments   and
	      results  between	rpcgen-generated  code	and user written code.
	      This option is useful for users who want to use threads in their
	      code.

       -n netid
	      Compile  into  server-side  stubs for the transport specified by
	      netid.  There should be an entry	for  netid  in	the  netconfig
	      database.	 This option may be specified more than once, so as to
	      compile a server that serves multiple transports.

       -N     Use the newstyle of rpcgen. This allows procedures to have  mul‐
	      tiple  arguments.	  It  also uses the style of parameter passing
	      that closely resembles C. So, when  passing  an  argument	 to  a
	      remote  procedure you do not have to pass a pointer to the argu‐
	      ment but the argument itself. This behaviour is  different  from
	      the  oldstyle  of rpcgen generated code. The newstyle is not the
	      default case because of backward compatibility.

       -o outfile
	      Specify the name of the output  file.   If  none	is  specified,
	      standard	output is used (-c, -h, -l, -m, -n, -s, -Sc, -Sm, -Ss,
	      and -t modes only).

       -s nettype
	      Compile into server-side stubs for all the transports  belonging
	      to  the class nettype.  The supported classes are netpath, visi‐
	      ble, circuit_n, circuit_v, datagram_n, datagram_v, tcp, and  udp
	      [see  rpc(3N)  for  the meanings associated with these classes].
	      This option may be specified more than once.  Note:  the	trans‐
	      ports are chosen at run time and not at compile time.

       -Sc    Generate sample code to show the use of remote procedure and how
	      to bind to the server before calling the client side stubs  gen‐
	      erated by rpcgen.

       -Sm    Generate	a  sample Makefile which can be used for compiling the
	      application.

       -Ss    Generate skeleton code for the remote procedures on  the	server
	      side.  You  would need to fill in the actual code for the remote
	      procedures.

       -t     Compile into RPC dispatch table.

       -T     Generate the code to support RPC dispatch tables.

       The options -c, -h, -l, -m, -s and -t are used exclusively to  generate
       a  particular  type of file, while the options -D and -T are global and
       can be used with the other options.

NOTES
       The RPC Language does not support nesting of structures.	  As  a	 work-
       around,	structures  can	 be  declared at the top-level, and their name
       used inside other structures in order to achieve the same effect.

       Name clashes can occur when using program definitions, since the appar‐
       ent  scoping  does  not	really apply.  Most of these can be avoided by
       giving unique names for programs, versions, procedures and types.

       The server code generated with -n option refers to the transport	 indi‐
       cated by netid and hence is very site specific.

EXAMPLE
       The following example:

	      $ rpcgen -T prot.x

       generates  the  five files: prot.h, prot_clnt.c, prot_svc.c, prot_xdr.c
       and prot_tbl.i.

       The following example sends the C data-definitions (header file) to the
       standard output.

	      $ rpcgen -h prot.x

       To  send	 the test version of the -DTEST, server side stubs for all the
       transport belonging to the class datagram_n to standard output, use:

	      $ rpcgen -s datagram_n -DTEST prot.x

       To create the server side stubs for the transport  indicated  by	 netid
       tcp, use:

	      $ rpcgen -n tcp -o prot_svc.c prot.x

SEE ALSO
       cc(1).

									    0a
[top]

List of man pages available for ElementaryOS

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net