s_time man page on OpenDarwin

Man page or keyword search:  
man Server   3202 pages
apropos Keyword Search (all sections)
Output format
OpenDarwin logo
[printable version]

S_TIME(1)			    OpenSSL			     S_TIME(1)

NAME
       s_time - SSL/TLS performance timing program

SYNOPSIS
       openssl s_time [-connect host:port] [-www page] [-cert filename] [-key
       filename] [-CApath directory] [-CAfile filename] [-reuse] [-new] [-ver‐
       ify depth] [-nbio] [-time seconds] [-ssl2] [-ssl3] [-bugs] [-cipher
       cipherlist]

DESCRIPTION
       The s_client command implements a generic SSL/TLS client which connects
       to a remote host using SSL/TLS. It can request a page from the server
       and includes the time to transfer the payload data in its timing mea‐
       surements. It measures the number of connections within a given time‐
       frame, the amount of data transferred (if any), and calculates the
       average time spent for one connection.

OPTIONS
       -connect host:port
	   This specifies the host and optional port to connect to.

       -www page
	   This specifies the page to GET from the server. A value of '/' gets
	   the index.htm[l] page. If this parameter is not specified, then
	   s_time will only perform the handshake to establish SSL connections
	   but not transfer any payload data.

       -cert certname
	   The certificate to use, if one is requested by the server. The
	   default is not to use a certificate. The file is in PEM format.

       -key keyfile
	   The private key to use. If not specified then the certificate file
	   will be used. The file is in PEM format.

       -verify depth
	   The verify depth to use. This specifies the maximum length of the
	   server certificate chain and turns on server certificate verifica‐
	   tion.  Currently the verify operation continues after errors so all
	   the problems with a certificate chain can be seen. As a side effect
	   the connection will never fail due to a server certificate verify
	   failure.

       -CApath directory
	   The directory to use for server certificate verification. This
	   directory must be in "hash format", see verify for more informa‐
	   tion. These are also used when building the client certificate
	   chain.

       -CAfile file
	   A file containing trusted certificates to use during server authen‐
	   tication and to use when attempting to build the client certificate
	   chain.

       -new
	   performs the timing test using a new session ID for each connec‐
	   tion.  If neither -new nor -reuse are specified, they are both on
	   by default and executed in sequence.

       -reuse
	   performs the timing test using the same session ID; this can be
	   used as a test that session caching is working. If neither -new nor
	   -reuse are specified, they are both on by default and executed in
	   sequence.

       -nbio
	   turns on non-blocking I/O.

       -ssl2, -ssl3
	   these options disable the use of certain SSL or TLS protocols. By
	   default the initial handshake uses a method which should be compat‐
	   ible with all servers and permit them to use SSL v3, SSL v2 or TLS
	   as appropriate.  The timing program is not as rich in options to
	   turn protocols on and off as the s_client(1) program and may not
	   connect to all servers.

	   Unfortunately there are a lot of ancient and broken servers in use
	   which cannot handle this technique and will fail to connect. Some
	   servers only work if TLS is turned off with the -ssl3 option; oth‐
	   ers will only support SSL v2 and may need the -ssl2 option.

       -bugs
	   there are several known bug in SSL and TLS implementations. Adding
	   this option enables various workarounds.

       -cipher cipherlist
	   this allows the cipher list sent by the client to be modified.
	   Although the server determines which cipher suite is used it should
	   take the first supported cipher in the list sent by the client.
	   See the ciphers(1) command for more information.

       -time length
	   specifies how long (in seconds) s_time should establish connections
	   and optionally transfer payload data from a server. Server and
	   client performance and the link speed determine how many connec‐
	   tions s_time can establish.

NOTES
       s_client can be used to measure the performance of an SSL connection.
       To connect to an SSL HTTP server and get the default page the command

	openssl s_time -connect servername:443 -www / -CApath yourdir -CAfile yourfile.pem -cipher commoncipher [-ssl3]

       would typically be used (https uses port 443). 'commoncipher' is a
       cipher to which both client and server can agree, see the ciphers(1)
       command for details.

       If the handshake fails then there are several possible causes, if it is
       nothing obvious like no client certificate then the -bugs, -ssl2, -ssl3
       options can be tried in case it is a buggy server. In particular you
       should play with these options before submitting a bug report to an
       OpenSSL mailing list.

       A frequent problem when attempting to get client certificates working
       is that a web client complains it has no certificates or gives an empty
       list to choose from. This is normally because the server is not sending
       the clients certificate authority in its "acceptable CA list" when it
       requests a certificate. By using s_client(1) the CA list can be viewed
       and checked. However some servers only request client authentication
       after a specific URL is requested. To obtain the list in this case it
       is necessary to use the -prexit option of s_client(1) and send an HTTP
       request for an appropriate page.

       If a certificate is specified on the command line using the -cert
       option it will not be used unless the server specifically requests a
       client certificate. Therefor merely including a client certificate on
       the command line is no guarantee that the certificate works.

BUGS
       Because this program does not have all the options of the s_client(1)
       program to turn protocols on and off, you may not be able to measure
       the performance of all protocols with all servers.

       The -verify option should really exit if the server verification fails.

SEE ALSO
       s_client(1), s_server(1), ciphers(1)

0.9.7d				  2004-05-17			     S_TIME(1)
[top]

List of man pages available for OpenDarwin

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net