sane-umax man page on Debian

Man page or keyword search:  
man Server   8174 pages
apropos Keyword Search (all sections)
Output format
Debian logo
[printable version]

sane-umax(5)		 SANE Scanner Access Now Easy		  sane-umax(5)

NAME
       sane-umax - SANE backend for UMAX scanners

ABOUT THIS FILE
       This  file only is a short descripton of the umax-backend for sane! For
       detailled information take a look at sane-umax-doc.html (it is included
       in the sane source directory and in the xsane online help)!

DESCRIPTION
       The  sane-umax library implements a SANE backend that provides acces to
       several UMAX-SCSI-scanners and some Linotye Hell SCSI-scanners,	paral‐
       lel- and USB-scanners are not (and propably will never be) supported!

       I  suggest  you	hold one hand on the power-button of the scanner while
       you try the first scans!

CONFIGURATION
       The    configuration    file    for    this    backend	 resides    in
       /etc/sane.d/umax.conf.

       Its contents is a list of device names that correspond to UMAX and UMAX
       compatible scanners. Empty lines and lines starting with	 a  hash  mark
       (#) are ignored. A sample configuration file is shown below:

	# this is a comment
	#
	option scsi-maxqueue 4
	option scsi-buffer-size-min 65536
	option scsi-buffer-size-max 131072
	option scan-lines 40
	option preview-lines 10
	option scsi-maxqueue 2
	option execute-request-sense 0
	option force-preview-bit-rgb 0
	option slow-speed -1
	option care-about-smearing -1
	option calibration-full-ccd -1
	option calibration-width-offset -1
	option calibration-bytes-pixel -1
	option exposure-time-rgb-bind -1
	option invert-shading-data -1
	option lamp-control-available 0
	option gamma-lsb-padded 0
	/dev/sge

	#scsi Vendor Model Type Bus Channel ID LUN
	# The following scanner supports lamp control
	option lamp-control-available 1
	scsi UMAX * Scanner * * * * *

	# scanner on /dev/scanner does not support lamp control
	option lamp-control-available 0
	/dev/scanner

       execute-request-sense:
	      values: 0 = disabled, 1 = enabled
	      default = 0
	      If  set to 1 umax_do_request_sense is called in umax_do_calibra‐
	      tion. This can hang the system (but has been enabled until  this
	      version)

       scsi-buffer-size-min, scsi-buffer-size-max:
	      values: 4096-1048576
	      default min = 32768, max = 131072
	      Especially  the  minimum value is very important.	 If this value
	      is set too small the backend is not able to send gamma tables to
	      the  scanner  or	to  do	a  correct color calibration. This may
	      result in strange color effects. If the minimum value is set too
	      large  then  the	backend	 is not able to allocate the requested
	      scsi buffer size and  aborts  with  out  of  memory  error.  The
	      default  is  32KB,  for  some scanners it should be increased to
	      64KB.

       scan-lines, preview-lines:
	      values: 1-65535
	      default: scan-lines = 40, preview-lines = 10
	      define the maximum number of lines that  are  scanned  into  one
	      buffer

       force-preview-bit-rgb:
	      values: 0 = disabled, 1 = enabled
	      default = 0
	      set preview bit in rgb real scan

       slow-speed, care-about-smearing:
	      values: -1 = auto, 0 = disabled, 1 = enabled
	      default = -1
	      dangerous options, needed for some scanners do not changed these
	      options until you really know what you do, you may destroy  your
	      scanner when you define wrong values for this options

       calibration-full-ccd:
	      values: -1 = auto, 0 = disabled, 1 = enabled
	      default = -1
	      do calibration for each pixel of ccd instead of selected image

       calibration-width-offset:
	      values: -99999 = auto, > -99999 set value
	      add an offset width to the calculated with for image/ccd

       calibration-bytes-pixel:
	      values:  -1  =  disabled,	 0  = not set, 1 = 1 byte/pixel, 2 = 2
	      bytes/pixel
	      use # bytes per pixel for calibration

       exposure-time-rgb-bind:
	      values: -1 = automatically set by driver - if known,  0  =  dis‐
	      abled (own selection for red, green and blue), 1 = enabled (same
	      values for red, green and blue)

       invert-shading-data:
	      values: -1 = automatically set by driver - if known,  0  =  dis‐
	      abled, 1 = enabled
	      default = -1
	      invert shading data before sending it back to the scanner

       lamp-control-available:
	      values:  0  = automatically set by driver - if known, 1 = avail‐
	      able
	      default = 0

       gamma-lsb-padded:
	      values: -1 = automatically set by driver - if known, 0  =	 gamma
	      data is msb padded, 1 = gamma data is lsb padded
	      default = -1

       handle-bad-sense-error:
	      values:  0 = handle as device busy, 1 = handle as ok, 2 = handle
	      as i/o error, 3 = ignore bad error code - continue sense handler
	      default = 0

       scsi-maxqueue:
	      values: 1..# (maximum defined at compile time)
	      default = 2
	      most scsi drivers allow internal command queueing with  a	 depth
	      of  2  commands.	In most cases it does not mprove anything when
	      you increase this value. When your scsi driver does not  support
	      any command queueing you can try to set this value to 1.

       The  special  device name must be a generic SCSI device or a symlink to
       such a device.  To find out to which device your	 scanner  is  assigned
       and  how you have to set the permissions of that device, have a look at
       sane-scsi.

SCSI ADAPTER TIPS
       The ISA-SCSI-adapters that are shipped with some Umax-scanners are  not
       supported  very	well by Linux (I suggest not to use it), the PCI-SCSI-
       adapters that come with some Umax-scanners are not supported at all (as
       far  as	I  know).  On other platforms these SCSI-adapters are not sup‐
       ported. So you typically need to purchase another SCSI-adapter that  is
       supported  by  your platform. See the relevant hardware FAQs and HOWTOs
       for your platform for more information.

       The UMAX-scanners do block the scsi-bus for a few seconds  while	 scan‐
       ning.  It  is  not  necessary  to  connect the scanner to its own SCSI-
       adapter. But if you need short response	time  for  your	 SCSI-harddisk
       (e.g.  if your computer is a file-server) or other scsi devices, I sug‐
       gest you use an own SCSI-adapter for your UMAX-scanner.

       If you have any problems with your Umax scanner, check your scsi	 chain
       (cable length, termination, ...).

       See also: sane-scsi(5)

FILES
       The backend configuration file:
	      /etc/sane.d/umax.conf

       The static library implementing this backend:
	      /usr/lib/sane/libsane-umax.a

       The shared library implementing this backend:
	      /usr/lib/sane/libsane-umax.so  (present  on systems that support
	      dynamic loading)

ENVIRONMENT
       SANE_DEBUG_UMAX
	      If the library was compiled with	debug  support	enabled,  this
	      environment  variable controls the debug level for this backend.
	      E.g., a value of 128 requests all debug output  to  be  printed.
	      Smaller levels reduce verbosity: SANE_DEBUG_UMAX values

	      Number  Remark

	       0       print important errors (printed each time)
	       1       print errors
	       2       print sense
	       3       print warnings
	       4       print scanner-inquiry
	       5       print informations
	       6       print less important informations
	       7       print called procedures
	       8       print reader_process messages
	       10      print called sane-init-routines
	       11      print called sane-procedures
	       12      print sane infos
	       13      print sane option-control messages

       Example:
	      export SANE_DEBUG_UMAX=8

BUGS
       X-resolutions greater than 600 dpi sometimes make problems

SEE ALSO
       sane(7)

AUTHOR
       Oliver Rauch

EMAIL-CONTACT
       Oliver.Rauch@Rauch-Domain.DE

				  14 Jul 2008			  sane-umax(5)
[top]

List of man pages available for Debian

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net