SCSA1394(7D)SCSA1394(7D)NAMEscsa1394 - SCSI to 1394 bridge driver
SYNOPSIS
unit@GUID
DESCRIPTION
The scsa1394 driver is a 1394 target and an SCSA HBA driver that sup‐
ports 1394 mass storage devices compliant with the Serial Bus Protocol
2 (SBP-2) specification. It supports both bus-powered and self-powered
1394 mass storage devices.
The scsa1394 nexus driver maps SCSA target driver requests to SBP-2
Operation Request Blocks (ORB's).
The scsa1394 driver creates a child device info node for each logical
unit (LUN) on the mass storage device. The standard Solaris SCSI disk
driver is attached to those nodes. Refer to sd(7D).
This driver supports multiple LUN devices and creates a separate child
device info node for each LUN. All child LUN nodes attach to sd(7D).
In previous releases, all 1394 mass storage devices were treated as
removable media devices and managed by rmformat(1) and volume manage‐
ment software. In the current release, however, only mass storage
devices with a removable bit (RMB) value of 1 are removable. (The RMB
is part of the device's SCSI INQUIRY data.) See SCSI specifications
T10/995D Revision 11a, T10/1236-D Revision 20 or T10/1416-D Revision 23
for more information. However, for backward compatibility, all 1394
mass storage devices can still be managed by rmformat(1). With or with‐
out a volume manager, you can mount, eject, hot remove and hot insert
a 1394 mass storage device as the following sections explain.
USING VOLUME MANAGEMENT
Mass storage devices are managed by a volume manager. Software that
manages removable media creates a device nickname that can be listed
with eject(1) or rmmount(1). A device that is not mounted automatically
can be mounted using rmmount(1) under /rmdisk/label. Note that the
mount(1M) and mount(1M) commands do not accept nicknames; you must use
explicit device names with these commands.
See rmmount(1) to unmount the device and eject(1) to eject the media.
If the device is ejected while it is mounted, volume management soft‐
ware unmounts the device before ejecting it. It also might kill any
active applications that are accessing the device.
Volume management software is hotplug-aware and normally mounts file
systems on USB mass storage devices if the file system is recognized.
Before hot removing the USB device, use eject(1) to unmount the file
system.
You can disable the automatic mounting and unmounting of removable
devices by inserting a entry for a removable device in /etc/vfstab. In
this entry, you must set the mount at boot field to no. See vfstab(4).
See the System Administration Guide, Volume I and Solaris Common Desk‐
top Environment: User's Guide for details on how to manage a removable
device with CDE and Removable Media Manager. See dtfile.1X under CDE
for information on how to use Removable Media Manager.
USING mount AND umount
Use mount(1M) to explicitly mount the device and umount(1M) to unmount
the device. Use eject(1) to eject the media. After you have explicitly
mounted a removable device, you cannot use a nickname as an argument to
eject.
Removing the storage device while it is being accessed or mounted fails
with a console warning. To hot remove the storage device from the sys‐
tem, unmount the file system, then kill all applications accessing the
device. Next, hot remove the device. A storage device can be hot
inserted at any time.
For a comprehensive listing of (non-bootable) 1394 mass-storage devices
that are compatible with this driver, see www.sun.com/io.
DEVICE SPECIAL FILES
Block special file names are located in /dev/dsk. Raw file names are
located in /dev/rdsk. Input/output requests to the devices must follow
the same restrictions as those for SCSI disks. Refer to sd(7D).
IOCTLS
Refer to cdio(7I) and dkio(7I).
ERRORS
Refer to sd(7D).
FILES
The device special files for the 1394 mass storage device are created
like those for a SCSI disk. Refer to sd(7D).
/dev/dsk/cntndnsn
Block files
/dev/rdsk/cntndnsn
Raw files
/vol/dev/aliases/rmdisk0
Symbolic link to the character device for the media in removable
drive 0. This is a generic removable media device.
/kernel/drv/scsa1394
32-bit x86 ELF kernel module
/kernel/drv/amd64/scsa1394
64-bit x86 ELF kernel module
/kernel/drv/sparcv9/scsa1394
64-bit SPARC ELF kernel module
ATTRIBUTES
See attributes(5) for a description of the following attributes:
┌───────────────┬───────────────────────────────┐
│ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├───────────────┼───────────────────────────────┤
│Architecture │ SPARC, x86, PCI-based systems │
└───────────────┴───────────────────────────────┘
SEE ALSOcdrw(1), eject(1), rmformat(1), rmmount(1), cfgadm_scsi(1M), fdisk(1M),
mount(1M), umount(1M), dtfile.1X (in CDE man pages), scsi(4),
vfstab(4), attributes(5), hci1394(7D), sd(7D), pcfs(7FS), cdio(7I),
dkio(7I)
IEEE Std 1394-1995 Standard for a High Performance Serial Bus
ANSI NCITS 325-1998 - Serial Bus Protocol 2 (SBP-2)
System Administration Guide: Devices and File Systems
SCSI Specification T10/995D Revision 11a — March 1997
SCSI SpecificationT10/1236-D Revision 20 — July 2001
SCSI SpecificationT10/1416-D Revision 23— May 2005
Solaris Common Desktop Environment: User's Guide
http://www.sun.com/io
Mar 2, 2007 SCSA1394(7D)
