SDPQUERY(1) BSD General Commands Manual SDPQUERY(1)NAMEsdpquery — SDP query utility
SYNOPSISsdpquery-h
sdpquery [-d device] -a address command [parameters ...]
sdpquery [-c path] -l command [parameters ...]
DESCRIPTION
The sdpquery utility attempts to query the specified Service Discovery
Protocol (SDP) server. Remote SDP servers are identified by their
address. Connection to the local SDP server is made via the control
socket. The sdpquery utility uses Service Search Attribute Requests and
prints results to standard output and error messages to standard error.
The options are as follows:
-a address Connect to the remote device with the specified address. The
address can be specified as BD_ADDR or a name. If a name was
specified, the sdpquery utility attempts to resolve the name
via bt_gethostbyname(3). If no remote address is given,
sdpquery attempts to contact a local SDP server via the con‐
trol socket.
-c path Specify path to the control socket. The default path is
/var/run/sdp.
-d device Connect from the local device with the specifed address. The
device can be specified by BD_ADDR or device name. See
btconfig(8) for a list of devices available. If no device is
specified, the sdpquery utility will use the best available.
-l Query the local SDP server via the control socket.
-h Display usage message and exit.
The currently supported commands in sdpquery are:
Browse [group] Browse for services. The group parameter is a 16-bit
UUID of the group to browse. If omitted, the Public
Browse Group. is used.
Search service Search for the service. The service parameter is a
16-bit UUID of the service to search for. For the fol‐
lowing services it is possible to use service name
instead of service UUID:
CIP Common ISDN Access
CTP Cordless Telephony
DUN DialUp Networking
FAX Fax
FTRN OBEX File Transfer
GN Group ad-hoc Network
HID Human Interface Device
HF Handsfree
HSET Headset
LAN LAN Access Using PPP
NAP Network Access Point
OPUSH OBEX Object Push
PANU Personal Area Networking User
SP Serial Port
EXIT STATUS
The sdpquery utility exits 0 on success, and >0 if an error occurs.
SEE ALSObluetooth(3), sdp(3), btconfig(8), sdpd(8)HISTORY
The sdpquery command first appeared in FreeBSD 5.3 as sdpcontrol. It was
ported to NetBSD 4.0 under its present name by Iain Hibbert under the
sponsorship of Itronix, Inc and imported into DragonFly 1.11.
AUTHORS
Maksim Yevmenkin ⟨m_evmenkin@yahoo.com⟩
Iain Hibbert for Itronix, Inc.
CAVEATS
The sdpquery utility only requests the following attributes from the SDP
server:
1. Service Record Handle
2. Service Class ID List
3. Protocol Descriptor List
4. Bluetooth Profile Descriptor List
BSD February 17, 2007 BSD
