sed man page on Aros

Printed from http://www.polarhome.com/service/man/?qf=sed&af=0&tf=2&of=Aros

SED(1)				 User Commands				SED(1)

NAME
       sed - stream editor for filtering and transforming text

SYNOPSIS
       sed [OPTION]... {script-only-if-no-other-script} [input-file]...

DESCRIPTION
       Sed  is a stream editor.	 A stream editor is used to perform basic text
       transformations on an input stream (a file or input from	 a  pipeline).
       While  in  some	ways similar to an editor which permits scripted edits
       (such as ed), sed works by making only one pass over the input(s),  and
       is consequently more efficient.	But it is sed's ability to filter text
       in a pipeline which particularly distinguishes it from other  types  of
       editors.

       -n, --quiet, --silent

	      suppress automatic printing of pattern space

       -e script, --expression=script

	      add the script to the commands to be executed

       -f script-file, --file=script-file

	      add the contents of script-file to the commands to be executed

       -i[SUFFIX], --in-place[=SUFFIX]

	      edit files in place (makes backup if extension supplied)

       -l N, --line-length=N

	      specify the desired line-wrap length for the `l' command

       --posix

	      disable all GNU extensions.

       -r, --regexp-extended

	      use extended regular expressions in the script.

       -s, --separate

	      consider	files  as  separate rather than as a single continuous
	      long stream.

       -u, --unbuffered

	      load minimal amounts of data from the input files and flush  the
	      output buffers more often

       --help
	      display this help and exit

       --version
	      output version information and exit

       If  no  -e, --expression, -f, or --file option is given, then the first
       non-option argument is taken as	the  sed  script  to  interpret.   All
       remaining  arguments  are  names	 of input files; if no input files are
       specified, then the standard input is read.

       E-mail bug reports to: bonzini@gnu.org .	 Be sure to include  the  word
       ``sed'' somewhere in the ``Subject:'' field.

COMMAND SYNOPSIS
       This is just a brief synopsis of sed commands to serve as a reminder to
       those who already know sed; other documentation (such  as  the  texinfo
       document) must be consulted for fuller descriptions.

   Zero-address ``commands''
       : label
	      Label for b and t commands.

       #comment
	      The  comment  extends until the next newline (or the end of a -e
	      script fragment).

       }      The closing bracket of a { } block.

   Zero- or One- address commands
       =      Print the current line number.

       a \

       text   Append text, which has each embedded newline preceded by a back‐
	      slash.

       i \

       text   Insert text, which has each embedded newline preceded by a back‐
	      slash.

       q      Immediately quit the sed	script	without	 processing  any  more
	      input,  except  that  if	auto-print is not disabled the current
	      pattern space will be printed.

       Q      Immediately quit the sed	script	without	 processing  any  more
	      input.

       r filename
	      Append text read from filename.

       R filename
	      Append a line read from filename.

   Commands which accept address ranges
       {      Begin a block of commands (end with a }).

       b label
	      Branch to label; if label is omitted, branch to end of script.

       t label
	      If  a  s///  has	done  a successful substitution since the last
	      input line was read and since the last  t	 or  T	command,  then
	      branch to label; if label is omitted, branch to end of script.

       T label
	      If  no  s///  has	 done a successful substitution since the last
	      input line was read and since the last  t	 or  T	command,  then
	      branch to label; if label is omitted, branch to end of script.

       c \

       text   Replace  the  selected  lines with text, which has each embedded
	      newline preceded by a backslash.

       d      Delete pattern space.  Start next cycle.

       D      Delete up to the first embedded newline in  the  pattern	space.
	      Start  next  cycle,  but skip reading from the input if there is
	      still data in the pattern space.

       h H    Copy/append pattern space to hold space.

       g G    Copy/append hold space to pattern space.

       x      Exchange the contents of the hold and pattern spaces.

       l      List out the current line in a ``visually unambiguous'' form.

       n N    Read/append the next line of input into the pattern space.

       p      Print the current pattern space.

       P      Print up to the first embedded newline of	 the  current  pattern
	      space.

       s/regexp/replacement/
	      Attempt  to match regexp against the pattern space.  If success‐
	      ful,  replace  that  portion  matched  with  replacement.	   The
	      replacement may contain the special character & to refer to that
	      portion of the pattern space  which  matched,  and  the  special
	      escapes  \1  through  \9	to refer to the corresponding matching
	      sub-expressions in the regexp.

       w filename
	      Write the current pattern space to filename.

       W filename
	      Write the first line of the current pattern space to filename.

       y/source/dest/
	      Transliterate the characters in the pattern space	 which	appear
	      in source to the corresponding character in dest.

Addresses
       Sed  commands can be given with no addresses, in which case the command
       will be executed for all input lines; with one address, in  which  case
       the  command  will  only	 be  executed for input lines which match that
       address; or with two addresses, in which case the command will be  exe‐
       cuted  for  all	input  lines  which match the inclusive range of lines
       starting from the first address and continuing to the  second  address.
       Three  things  to  note about address ranges: the syntax is addr1,addr2
       (i.e., the addresses are separated by a comma); the  line  which	 addr1
       matched will always be accepted, even if addr2 selects an earlier line;
       and if addr2 is a regexp, it will not be tested against the  line  that
       addr1 matched.

       After  the address (or address-range), and before the command, a !  may
       be inserted, which specifies that the command shall only be executed if
       the address (or address-range) does not match.

       The following address types are supported:

       number Match only the specified line number.

       first~step
	      Match every step'th line starting with line first.  For example,
	      ``sed -n 1~2p'' will print all the  odd-numbered	lines  in  the
	      input  stream,  and the address 2~5 will match every fifth line,
	      starting with the second. (This is an extension.)

       $      Match the last line.

       /regexp/
	      Match lines matching the regular expression regexp.

       \cregexpc
	      Match lines matching the regular expression regexp.  The	c  may
	      be any character.

       GNU sed also supports some special 2-address forms:

       0,addr2
	      Start  out  in  "matched	first  address"	 state, until addr2 is
	      found.  This is similar to 1,addr2, except that if addr2 matches
	      the very first line of input the 0,addr2 form will be at the end
	      of its range, whereas the 1,addr2 form  will  still  be  at  the
	      beginning of its range.

       addr1,+N
	      Will match addr1 and the N lines following addr1.

       addr1,~N
	      Will  match  addr1  and the lines following addr1 until the next
	      line whose input line number is a multiple of N.

REGULAR EXPRESSIONS
       POSIX.2 BREs should be supported, but they aren't completely because of
       performance  problems.  The \n sequence in a regular expression matches
       the newline character, and similarly for \a, \t, and other sequences.

BUGS
       E-mail bug reports to bonzini@gnu.org.  Be sure	to  include  the  word
       ``sed''	somewhere in the ``Subject:'' field.  Also, please include the
       output of ``sed --version'' in the body of your report if at all possi‐
       ble.

COPYRIGHT
       Copyright © 2003 Free Software Foundation, Inc.
       This is free software; see the source for copying conditions.  There is
       NO warranty; not even for MERCHANTABILITY or FITNESS FOR	 A  PARTICULAR
       PURPOSE, to the extent permitted by law.

SEE ALSO
       awk(1),	ed(1),	grep(1),  tr(1),  perlre(1),  sed.info, any of various
       books on sed, the sed FAQ (http://sed.sf.net/grabbag/tutorials/sed‐
       faq.txt), http://sed.sf.net/grabbag/.

       The full documentation for sed is maintained as a Texinfo manual.  If
       the info and sed programs are properly installed at your site, the com‐
       mand

	      info sed

       should give you access to the complete manual.

sed version 4.1.4		 February 2006				SED(1)
[top]

List of man pages available for Aros

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net