stationlist.xml(5)stationlist.xml(5)NAMEstationlist.xml - tvtime station configuration file
SYNOPSIS
~/.tvtime/stationlist.xml
DESCRIPTION
The stationlist.xml file contains the configuration of channel informa‐
tion for capture cards with tuners. It contains a list of active chan‐
nels along with their frequencies, renumbering information, and channel
name. The stationlist.xml file is updated by tvtime at runtime to
store settings across sessions. For this reason, you should not edit
this file while tvtime is running, as your changes may be overwritten.
This file is created or updated whenever channel information is changed
in tvtime. This is done when renumbering a channel, using the channel
scanner, or manually activating or deactivating a specific channel from
the list.
Channel settings are saved specific to norm and frequency table.
<?xml version="1.0"?>
<!DOCTYPE stationlist PUBLIC "-//tvtime//DTD stationlist 1.0//EN"
"http://tvtime.sourceforge.net/DTD/stationlist.dtd">
<stationlist xmlns="http://tvtime.sourceforge.net/DTD/">
<list norm="NTSC" frequencies="US-Cable">
<station ... />
... station list
</list>
</stationlist>
That is, each norm/frequency combination will get its own section in
the configuration file. The frequencies name is not special, you can
have frequencies="foobar" and running
will do the right thing. The norm, however, must match the norm being
used.
Entries in a list are in the following form:
<station name="CNN" active="1" position="18"
band="US Cable" channel="18"/>
<station name="DSF" active="1" position="12"
band="VHF E2-E12" channel="E12"/>
STATIONS
Each station has its own properties that should be set.
name The human-readable name of the current station.
active When set to 1, the channel is active. To deactivate the chan‐
nel, set this value to 0.
position
This setting specifies the position the channel occupies on the
dial. This allows users to arbitrarily map any particular chan‐
nel to a particular position on the dial.
band
channel
The possible bands and channels available in tvtime are:
Band name Channels provided
US Cable 1–99
US Cable 100 100–125
US Two-Way T7, T8, T9, T10, T11, T12 T13, T14
US Broadcast 2–83
China Broadcast 1–68, A1–A7, B1–B31, C1–C5
Japan Broadcast 1–62
Japan Cable 13–63
VHF E2-E12 E1–E12
VHF S1-S41 S1–S41
VHF Misc X, Y, Z, Z+1, Z+2
VHF France K01–K10, KB–KQ, H01–H19
VHF Russia R1–R12, SR1–SR19
VHF Australia AS1–AS12, AS5A, AS9A
VHF Italy A–H, H1, H2
VHF Ireland I1–I9
VHF South Africa 1–13
UHF U21–U69
UHF Australia AU28–AU69
Australia Optus 01–058
Custom channels can be included manually by specifying the fre‐
quency in megahertz:
<station name="2" active="1" position="0"
band="Custom" channel="55.69MHz"/>
norm A per-channel norm can be specified in the stationlist. This is
for stations which receive both PAL and SECAM stations, such
that they can choose the colour encoding format per-channel.
The only valid values here are either PAL or SECAM.
network
Sets the name of the network for the OSD display. In NTSC
regions, this is set from the XDS information in the VBI if VBI
decoding is enabled.
call Sets the call letters of the network for the OSD display. In
NTSC regions, this is set from the XDS information in the VBI if
VBI decoding is enabled.
xmltvid
Sets the XMLTV channel identifier to associate this channel with
if tvtime cannot automatically make the association. For fol‐
lowing channel definition in an XMLTV file:
<channel id="I10119.labs.zap2it.com">
<display-name>CICA</display-name>
<display-name>TV Ontario (CICA)</display-name>
<display-name>Canadian Independent</display-name>
</channel>
An associated stationlist entry would be:
<station name="2" active="1" position="0"
band="Custom" channel="55.69MHz"
xmltvid="I10119.labs.zap2it.com"/>
AUTHORS
Achim Schneider, Billy Biggs.
SEE ALSOtvtime(1), tvtime-command(1), tvtime-scanner(1), tvtime.xml(5).
tvtime 1.0RC1 October 2004 stationlist.xml(5)
