STGE(4) BSD Programmer's Manual STGE(4)NAMEstge - Sundance/Tamarack TC9021 Gigabit Ethernet driver
SYNOPSIS
stge* at pci? dev ? function ?
Configuration of PHYs or Ten-bit interfaces may also be necessary. See
mii(4).
DESCRIPTION
The stge device driver supports the Sundance/Tamarack TC9021 Gigabit Eth-
ernet chip.
The Sundance/Tamarack TC9021 is found on the D-Link DGE-550T, and the An-
tares Microsystems Gigabit Ethernet board. It uses an external PHY or an
external 10-bit interface.
SEE ALSOarp(4), eephy(4), ifmedia(4), intro(4), mii(4), netintro(4), pci(4),
vlan(4), hostname.if(5), ifconfig(8)HISTORY
The stge driver first appeared in OpenBSD 3.1.
AUTHORS
The stge driver was written by Jason R. Thorpe <thorpej@netbsd.org>.
BUGS
The stge driver does not support the VLAN tag insertion/removal feature
of the TC9021 chip. This is primarily because the TC9021's VLAN do not
have a useful programming interface.
The stge driver does not yet support jumbo Ethernet frames.
MirOS BSD #10-current July 24, 2001 1