tcpick(8)tcpick(8)NAMEtcpick - tcp stream sniffer and connection tracker
SYNOPSIStcpick [ -a ] [ -n ] [ -C ]
[ -e count ]
[ -i interface | -r file ]
[ -X timeout ]
[ -D ] [ -F1 | -F2 ]
[ -yH | -yP | -yR | -yU | -yx | -yX ]
[ -bH | -bP | -bR | -bU | -bx | -bX ]
[ -wH[ub] | -wP[ub] | -wR[ub] | -wU[ub] ]
[ -v [ verbosity ]] [ -S ] [ -h ]
[ --separator ]
[ -T | -Tf [ number ]]
[ -E | -Ef [ number ]]
[ -Pc | -Ps ]
[ "filter" ]
[ --help ] [ --version ]
DESCRIPTIONtcpick is a textmode sniffer libpcap-based that can track tcp streams
and saves the data captured in different files, each for every connec‐
tion, or displays them in the terminal in different formats (hexdump,
printable characters, raw...) Useful for picking files in a passive
way. It is useful to keep track of what users of a network are doing,
and is usable with textmode tools like grep, sed, awk. Happy data
hunting :-)
BASE OPTIONS-i --interface interface
listen on selected interface, (i.e. ppp0 or eth0). If option -i
is omitted, tcpick is able to select the first open interface
(usually a ethernet card).
-r --readfile
reads raw packets from a file written with tcpdump -w instead of
using a network device.
"filter"
This is the filter for the capturer engine. You can set it in
the same way of setting the tcpdump(1) filter. Read tcpdump(1)
manpage for other explanations.
-a Displays host names instead of ip addresses. Warning: for every
new ip grabbed a dns query will be generated! Use it carefully
on high-traffic network devices!
-C --colors
Uses terminal colors: very nice! It should help you to read the
output of tcpick-D number --dirs number
Create directories to store sniffed sessions. When a directory
contains number sessions, a new one will be created.
-e count
Exits when count packets have been sniffed
-E number
Exit when number sniffed connections are detected as "CLOSED"
-Ef number
Exit when the first number connections are detected as "CLOSED"
-F1 -F2 --filenaming 1|2
Choose the filenaming system.
-F1 : tcpick_clientip_serverip.side.dat
(side means clnt, serv or both)
-F2 : tcpick_connectionnumber_clientip_serverip.side.dat
-h Shows source and destination ip and port; shows tcp flags as
letters.
--help Displays a short help summary
-p Don't put the network interface in promiscuous mode. Note that
the interface might be in promiscuous mode for some other
reason.
-S Suppresses the "status of the connection" banner.
--separator
Add a separator for the payloads displayed.
-t Adds timestamp in hour:minutes:seconds:microseconds format
-td Like -t with date timestamp in day-month-year format
-T number
Track number connections. It could be very useful on a high-
traffic network device. If number is not specified, it will be
set to 1.
-Tf number
Track only the first number connections; the following will be
discarded. If number is not specified, it will be set to 1.
-v verbosity
Quite useless, yet. Set verbosity level. Actually there are not
really many extra messages to display, this means it is enabled
by default (-v1). Set verbosity level to 0 to suppress extra
messages (-v0) except error messages. Set verbosity level to 5
to display debug messages (-v5). There are not other verbosity
levels.
-X timeout
Connections are considered EXPIRED when there is no traffic for
at least timeout seconds. Default is 600.
--version
Displays the tcpick version
DISPLAY THE DATA IN THE TCP PACKETS
These options are prefixed by -y and are useful to display in various
ways the content of the packet sniffed (the data, called payload), once
it arrives at the listening interface. In that way the tcp duplicates
will be not discarded and the packets will not be reordered, but dis‐
played "as is". If you want a fully acknowledged stream, see the -w and
-b set of options.
-yH View data in hexadecimal-spaced mode (for the hexdump see -yx
and -yX options.
-yP Shows data contained in the tcp packets. Non-printable charac‐
ters are transformed in dots: ".". Newline character is pre‐
served. This is the best way, in my opinion to show data like
HTTP requests, IRC communication, SMTP stuff and so on.
-yR Displays all kind of characters, printable and non printable. If
something binary is transmitted, the effect will probably be
like watching with "cat" at a gzipped file.
-yx Shows all data after the header in hexadecimal dump of 16 bytes
per line.
-yX Shows all data after the header in hexadecimal and ascii dump
with 16 bytes per line.
-yU Shows all data after the header, but Unprintable characters are
displayed as hexadecimal values between a "<" and a ">" symbol.
REBUILD AND WRITE THE TCP STREAM TO FILE
The prefix for these options is -w. The TCP stream that has been
sniffed with these options will be written to file named:
client_<ip_client>_<ip_server>_<port_server>.tcpick and
server_<ip_client>_<ip_server>_<port_server>.tcpick
With the u flag of the -w option (i.e. -wRu) both client and server
data will be written to a unique file named in that way:
<ip_client>_<ip_server>_<port_server>.tcpick
If you use the additional flag b of the -w option (i.e. -wPub), in the
file will be written this banner:
[client|server] offset before:offset after (length of rebuilded seg‐
ment)
to distinguish between client and server data.
The flow is rebuilded, reordered and the duplicates are dropped. In
that way it is possible to sniff entire files transmitted via ftp with‐
out data corruption (you can see this with md5sum). If no argument is
given to -w the data will be written like -wR You can decide to write
only client or server data by setting the flag
C (output only client data) and S (output only server data) to the -w
set.
-wR This is the preferred option: data will be written without any
changes. Useful for sniffing binary or compressed files.
(-wRC only the client, -wRS only the server)
-wP Unprintable characters are written like dots.
(-wPC only the client, -wPS only the server)
-wU Unprintable characters are displayed as hexadecimal values
between a "<" and a ">" symbol.
(-wPC only the client, -wPS only the server)
-wH The flow is written in hexadecimal-spaced mode.
(-wHC only the client, -wHS only the server)
DISPLAY THE REBUILDED TCP STREAM
The prefix for these options is -b. This set of options is very useful
if you want to redirect the sniffed flow to anoter program with a pipe,
and there should be no data corruption. Of course the most useful is
-bR to show the data as they are (raw). A very useful feature is the
flag C (output only client data) and S (output only server data). I.e.:
-bRC will display only the data from the client in raw mode; in that
way you can put them in a file with a pipe redirection.
The sub-options are quite the same of the -y set, so you have:
-bH hex-spaced
(-bHC only the client, -bHS only the server)
-bP unprintable displayed as dots
(-bPC only the client, -bPS only the server)
-bR raw mode
(-bRC only the client, -bRS only the server)
-bU unprintable as <hex>.
(-bUC only the client, -bUS only the server)
-bx hexdump
(-bxC only the client, -bxS only the server)
-bU hexdump + ascii
(-bXC only the client, -bXS only the server)
-PC --pipe client
This is an alias for -bRC -S -v0 -Tf1 -Ef1. With this option
you are able to track only the first connection (-T1) matched by
tcpick and data are displayed as raw. Only data from the client
are put on stdout. All messages and banners are suppressed,
except error messages (-S -v0), so this option is particularly
useful to download an entire fully rebuilded and acknowledged
connection.
-PS --pipe server
This is an alias for -bRS -S -v0 -Tf1 -Ef1.
EXAMPLES
how to display the connection status:
# tcpick-i eth0 -C
display the payload and packet headers:
# tcpick-i eth0 -C -yP -h -a
display client data only of the first smtp connection:
# tcpick-i eth0 -C -bCU -T1 "port 25"
download a file passively:
# tcpick-i eth0 -wR "port ftp-data"
log http data in unique files (client and server mixed together):
# tcpick-i eth0 "port 80" -wRub
redirect the first connection to a software:
# tcpick-i eth0 --pipe client "port 80" | gzip >
http_response.gz
# tcpick-i eth0 --pipe server "port 25" | nc foobar.net 25
MAILING-LIST
Address: <tcpick-project[a]lists.sourceforge.net>
Archive: http://sourceforge.net/mailarchive/forum.php?forum=tcpick-
project
Subscribe: http://lists.sourceforge.net/lists/listinfo/tcpick-project
If you have new ideas, patches, feature requests or simply need help,
don't wait! I will be grateful if you send a message to the mailing
list (even if you want to say what you liked most on tcpick).
TCPICK WEBSITE
The tcpick website is at http://tcpick.sf.net.
You can find the project page here: http://source‐
forge.net/projects/tcpick kindly hosted by the sourceforge team.
AUTHORS
Please check AUTHORS file.
BUGS
Tcpick is an experimental software, and maybe some bugs are described
in the KNOWN-BUGS file.
On some versions of MacOSX Segmentation Fault happens and connections
aren't tracked properly.
If you find any other bug, please write to the tcpick mailing list.
SEE ALSO
Other nice packet/data sniffers:
tcpdump, ngrep, tcptrack, ettercap, ethereal, snort
LICENSE
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at you
option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of MER‐
CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111, USA.
tcpick(8)
