tcsetattr man page on MirBSD

Man page or keyword search:  
man Server   6113 pages
apropos Keyword Search (all sections)
Output format
MirBSD logo
[printable version]

TCSETATTR(3)		   BSD Programmer's Manual		  TCSETATTR(3)

NAME
     cfgetispeed, cfsetispeed, cfgetospeed, cfsetospeed, cfsetspeed,
     cfmakeraw, tcgetattr, tcsetattr - manipulating the termios structure

SYNOPSIS
     #include <termios.h>

     speed_t
     cfgetispeed(const struct termios *tp);

     int
     cfsetispeed(struct termios *tp, speed_t speed);

     speed_t
     cfgetospeed(const struct termios *tp);

     int
     cfsetospeed(struct termios *tp, speed_t speed);

     int
     cfsetspeed(struct termios *tp, speed_t speed);

     void
     cfmakeraw(struct termios *tp);

     int
     tcgetattr(int fd, struct termios *tp);

     int
     tcsetattr(int fd, int action, const struct termios *tp);

DESCRIPTION
     The cfmakeraw(), tcgetattr(), and tcsetattr() functions are provided for
     getting and setting the termios structure.

     The cfgetispeed(), cfsetispeed(), cfgetospeed(), cfsetospeed(), and
     cfsetspeed() functions are provided for getting and setting the baud rate
     values in the termios structure. The effects of the functions on the ter-
     minal as described below do not become effective, nor are all errors
     detected, until the tcsetattr() function is called. Certain values for
     baud rates set in the termios structure and passed to tcsetattr() have
     special meanings. These are discussed in the portion of the manual page
     that describes the tcsetattr() function.

GETTING AND SETTING THE BAUD RATE
     The input and output baud rates are found in the termios structure. The
     unsigned integer speed_t is typedef'd in the include file <termios.h>. On
     OpenBSD, the value of the integer corresponds directly to the baud rate
     being represented. However, this is not true of all systems and new code
     should use the symbolic value for maximum portability.

	   #define B0	   0
	   #define B50	   50
	   #define B75	   75
	   #define B110	   110
	   #define B134	   134
	   #define B150	   150
	   #define B200	   200
	   #define B300	   300
	   #define B600	   600
	   #define B1200   1200
	   #define B1800   1800
	   #define B2400   2400
	   #define B4800   4800
	   #define B9600   9600
	   #define B19200  19200
	   #define B38400  38400
	   #ifndef _POSIX_SOURCE
	   #define EXTA	   19200
	   #define EXTB	   38400
	   #endif  /*_POSIX_SOURCE */

     The cfgetispeed() function returns the input baud rate in the termios
     structure referenced by tp.

     The cfsetispeed() function sets the input baud rate in the termios struc-
     ture referenced by tp to speed.

     The cfgetospeed() function returns the output baud rate in the termios
     structure referenced by tp.

     The cfsetospeed() function sets the output baud rate in the termios
     structure referenced by tp to speed.

     The cfsetspeed() function sets both the input and output baud rate in the
     termios structure referenced by tp to speed.

     Upon successful completion, the functions cfsetispeed(), cfsetospeed(),
     and cfsetspeed() return a value of 0. Otherwise, a value of -1 is re-
     turned and the global variable errno is set to indicate the error.

GETTING AND SETTING THE TERMIOS STATE
     This section describes the functions that are used to control the general
     terminal interface. Unless otherwise noted for a specific command, these
     functions are restricted from use by background processes. Attempts to
     perform these operations shall cause the process group to be sent a
     SIGTTOU signal. If the calling process is blocking or ignoring SIGTTOU
     signals, the process is allowed to perform the operation and the SIGTTOU
     signal is not sent.

     In all the functions, although fd is an open file descriptor, the func-
     tions affect the underlying terminal file, not just the open file
     description associated with the particular file descriptor.

     The cfmakeraw() function sets the flags stored in the termios structure
     to a state disabling all input and output processing, giving a "raw I/O
     path". It should be noted that there is no function to reverse this ef-
     fect. This is because there are a variety of processing options that
     could be re-enabled and the correct method is for an application to
     snapshot the current terminal state using the function tcgetattr(), set-
     ting raw mode with cfmakeraw() and the subsequent tcsetattr(), and then
     using another tcsetattr() with the saved state to revert to the previous
     terminal state.

     The tcgetattr() function copies the parameters associated with the termi-
     nal referenced by fd in the termios structure referenced by tp. This
     function is allowed from a background process, although the terminal at-
     tributes may be subsequently changed by a foreground process.

     The tcsetattr() function sets the parameters associated with the terminal
     from the termios structure referenced by tp. The action field is created
     by OR'ing the following values, as specified in the include file
     <termios.h>.

     TCSANOW	The change occurs immediately.

     TCSADRAIN	The change occurs after all output written to fd has been
		transmitted to the terminal. This value of action should be
		used when changing parameters that affect output.

     TCSAFLUSH	The change occurs after all output written to fd has been
		transmitted to the terminal. Additionally, any input that has
		been received but not read is discarded.

     TCSASOFT	If this value is OR'ed into the action value, the values of
		the c_cflag, c_ispeed, and c_ospeed fields are ignored.

     The 0 baud rate is used to terminate the connection. If 0 is specified as
     the output speed to the function tcsetattr(), modem control will no
     longer be asserted on the terminal, disconnecting the terminal.

     If zero is specified as the input speed to the function tcsetattr(), the
     input baud rate will be set to the same value as that specified by the
     output baud rate.

RETURN VALUES
     If tcsetattr() is unable to make any of the requested changes, it returns
     -1 and sets errno. Otherwise, it makes all of the requested changes it
     can. If the specified input and output baud rates differ and are a combi-
     nation that is not supported, neither baud rate is changed.

ERRORS
     Upon successful completion, the functions tcgetattr() and tcsetattr() re-
     turn a value of 0. Otherwise, they return -1 and the global variable
     errno is set to indicate the error, as follows:

     [EBADF]	   The fd argument to tcgetattr() or tcsetattr() was not a
		   valid file descriptor.

     [EINTR]	   The tcsetattr() function was interrupted by a signal.

     [EINVAL]	   The action argument to the tcsetattr() function was not
		   valid, or an attempt was made to change an attribute
		   represented in the termios structure to an unsupported
		   value.

     [ENOTTY]	   The file associated with the fd argument to tcgetattr() or
		   tcsetattr() is not a terminal.

SEE ALSO
     tcsendbreak(3), termios(4)

STANDARDS
     The cfgetispeed(), cfsetispeed(), cfgetospeed(), cfsetospeed(),
     tcgetattr(), and tcsetattr() functions are expected to be compliant with
     the IEEE Std 1003.1-1988 ("POSIX") specification. The cfmakeraw() and
     cfsetspeed() functions, as well as the TCSASOFT option to the tcsetattr()
     function are extensions to the IEEE Std 1003.1-1988 ("POSIX") specifica-
     tion.

MirOS BSD #10-current		March 4, 1992				     2
[top]

List of man pages available for MirBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net