termcap man page on OpenBSD

Man page or keyword search:  
man Server   11362 pages
apropos Keyword Search (all sections)
Output format
OpenBSD logo
[printable version]

TERMCAP(5)		  OpenBSD Programmer's Manual		    TERMCAP(5)

NAME
     termcap - terminal capability database

SYNOPSIS
     termcap

DESCRIPTION
     The termcap file is a database describing terminals, used, for example,
     by vi(1) and curses(3).  Terminals are described in termcap by giving a
     set of capabilities that they have and by describing how operations are
     performed.	 Padding requirements and initialization sequences are
     included in termcap.

     Entries in termcap consist of a number of `:'-separated fields.  The
     first entry for each terminal gives the names that are known for the
     terminal, separated by `|' characters.  The first name given is the most
     common abbreviation for the terminal.  The last name given should be a
     long name fully identifying the terminal, and all others are understood
     as synonyms for the terminal name.	 All names but the last should be in
     lower case and contain no blanks; the last name may well contain upper
     case characters and blanks for readability.

     Terminal names (except for the last, verbose entry) should be chosen
     using the following conventions.  The particular piece of hardware making
     up the terminal should have a root name chosen, thus ``hp2621'' This name
     should not contain hyphens.  Modes that the hardware can be in or user
     preferences should be indicated by appending a hyphen and an indicator of
     the mode.	Therefore, a ``vt100'' in 132-column mode would be
     ``vt100-w''.

     The following suffixes should be used where possible:

     Suffix    Meaning					     Example
     -w	       Wide mode (more than 80 columns).	     vt100-w
     -am       With automatic margins (usually default).     vt100-am
     -nam      Without automatic margins.		     vt100-nam
     -n	       Number of lines on screen.		     aaa-60
     -na       arrow keys (leave them in local).	     concept100-na
     -np       Number of pages of memory.		     concept100-4p
     -rv       Reverse video.				     concept100-rv

CAPABILITIES
     The characters in the Notes function field in the table have the
     following meanings (more than one may apply to a capability):

     N	  Indicates numeric parameter(s).
     P	  Indicates that padding may be specified.
     *	  Indicates that padding may be based on the number of lines affected.
     o	  Indicates capability is obsolete.

     ``Obsolete'' capabilities have no terminfo equivalents, since they were
     considered useless, or are subsumed by other capabilities.	 New software
     should not rely on them at all.

     Name      Type	 Notes	   Description
     ae	       str	 (P)	   End alternate character set.
     AL	       str	 (NP*)	   Add n new blank lines
     al	       str	 (P*)	   Add new blank line.
     am	       bool		   Terminal has automatic margins.
     as	       str	 (P)	   Start alternate character set.
     bc	       str	 (o)	   Backspace if not ^H.
     bl	       str	 (P)	   Audible signal (bell).
     bs	       bool	 (o)	   Terminal can backspace with ^H.
     bt	       str	 (P)	   Back tab.
     bw	       bool		   le (backspace) wraps from column 0 to last
				   column.
     CC	       str		   Terminal settable command character in
				   prototype.
     cd	       str	 (P*)	   Clear to end of display.
     ce	       str	 (P)	   Clear to end of line.
     ch	       str	 (NP)	   Set cursor column (horizontal position).
     cl	       str	 (P*)	   Clear screen and home cursor.
     CM	       str	 (NP)	   Memory-relative cursor addressing.
     cm	       str	 (NP)	   Screen-relative cursor motion.
     co	       num		   Number of columns in a line (see BUGS
				   section below).
     cr	       str	 (P)	   Carriage return.
     cs	       str	 (NP)	   Change scrolling region (VT100).
     ct	       str	 (P)	   Clear all tab stops.
     cv	       str	 (NP)	   Set cursor row (vertical position).
     da	       bool		   Display may be retained above the screen.
     dB	       num	 (o)	   Milliseconds bs delay needed (default 0).
     db	       bool		   Display may be retained below the screen.
     DC	       str	 (NP*)	   Delete n characters.
     dC	       num	 (o)	   Milliseconds cr delay needed (default 0).
     dc	       str	 (P*)	   Delete character.
     dF	       num	 (o)	   Milliseconds ff delay needed (default 0).
     DL	       str	 (NP*)	   Delete n lines.
     dl	       str	 (P*)	   Delete line.
     dm	       str		   Enter delete mode.
     dN	       num	 (o)	   Milliseconds nl delay needed (default 0).
     DO	       str	 (NP*)	   Move cursor down n lines.
     do	       str		   Down one line.
     ds	       str		   Disable status line.
     dT	       num	 (o)	   Milliseconds of horizontal tab delay needed
				   (default 0).
     dV	       num	 (o)	   Milliseconds of vertical tab delay needed
				   (default 0).
     ec	       str	 (NP)	   Erase n characters.
     ed	       str		   End delete mode.
     ei	       str		   End insert mode.
     eo	       bool		   Can erase overstrikes with a blank.
     EP	       bool	 (o)	   Even parity.
     es	       bool		   Escape can be used on the status line.
     ff	       str	 (P*)	   Hardcopy terminal page eject.
     fs	       str		   Return from status line.
     gn	       bool		   Generic line type, for example dialup,
				   switch).
     hc	       bool		   Hardcopy terminal.
     HD	       bool	 (o)	   Half-duplex.
     hd	       str		   Half-line down (forward 1/2 linefeed).
     ho	       str	 (P)	   Home cursor.
     hs	       bool		   Has extra ``status line''.
     hu	       str		   Half-line up (reverse 1/2 linefeed).
     hz	       bool		   Cannot print ``~'' (Hazeltine).
     i1-i3     str		   Terminal initialization strings (terminfo
				   only)
     IC	       str	 (NP*)	   Insert n blank characters.
     ic	       str	 (P*)	   Insert character.
     if	       str		   Name of file containing initialization
				   string.
     im	       str		   Enter insert mode.
     in	       bool		   Insert mode distinguishes nulls.
     iP	       str		   Pathname of program for initialization
				   (terminfo only).
     ip	       str	 (P*)	   Insert pad after character inserted.
     is	       str		   Terminal initialization string (termcap
				   only).
     it	       num		   Tabs initially every n positions.
     K1	       str		   Sent by keypad upper left.
     K2	       str		   Sent by keypad center.
     K3	       str		   Sent by keypad upper right.
     K4	       str		   Sent by keypad lower left.
     K5	       str		   Sent by keypad lower right.
     k0-k9     str		   Sent by function keys 0-9.
     kA	       str		   Sent by insert-line key.
     ka	       str		   Sent by clear-all-tabs key.
     kb	       str		   Sent by backspace key.
     kC	       str		   Sent by clear-screen or erase key.
     kD	       str		   Sent by delete-character key.
     kd	       str		   Sent by down-arrow key.
     kE	       str		   Sent by clear-to-end-of-line key.
     ke	       str		   Out of ``keypad transmit'' mode.
     kF	       str		   Sent by scroll-forward/down key.
     kH	       str		   Sent by home-down key.
     kh	       str		   Sent by home key.
     kI	       str		   Sent by insert-character or
				   enter-insert-mode key.
     kL	       str		   Sent by delete-line key.
     kl	       str		   Sent by left-arrow key.
     kM	       str		   Sent by insert key while in insert mode.
     km	       bool		   Has a ``meta'' key (shift, sets parity
				   bit).
     kN	       str		   Sent by next-page key.
     kn	       num	 (o)	   Number of function (k0-k9) keys (default
				   0).
     ko	       str	 (o)	   Termcap entries for other non-function
				   keys.
     kP	       str		   Sent by previous-page key.
     kR	       str		   Sent by scroll-backward/up key.
     kr	       str		   Sent by right-arrow key.
     kS	       str		   Sent by clear-to-end-of-screen key.
     ks	       str		   Put terminal in ``keypad transmit'' mode.
     kT	       str		   Sent by set-tab key.
     kt	       str		   Sent by clear-tab key.
     ku	       str		   Sent by up-arrow key.
     l0-l9     str		   Labels on function keys if not ``fn''.
     LC	       bool	 (o)	   Lower-case only.
     LE	       str	 (NP)	   Move cursor left n positions.
     le	       str	 (P)	   Move cursor left one position.
     li	       num		   Number of lines on screen or page (see BUGS
				   section below).
     ll	       str		   Last line, first column.
     lm	       num		   Lines of memory if > li (0 means varies).
     ma	       str	 (o)	   Arrow key map (used by vi(1) version 2
				   only).
     mb	       str		   Turn on blinking attribute.
     md	       str		   Turn on bold (extra bright) attribute.
     me	       str		   Turn off all attributes.
     mh	       str		   Turn on half-bright attribute.
     mi	       bool		   Safe to move while in insert mode.
     mk	       str		   Turn on blank attribute (characters
				   invisible).
     ml	       str	 (o)	   Memory lock on above cursor.
     mm	       str		   Turn on ``meta mode'' (8th bit).
     mo	       str		   Turn off ``meta mode''.
     mp	       str		   Turn on protected attribute.
     mr	       str		   Turn on reverse-video attribute.
     ms	       bool		   Safe to move in standout modes.
     mu	       str	 (o)	   Memory unlock (turn off memory lock).
     nc	       bool	 (o)	   No correctly-working cr (Datamedia 2500,
				   Hazeltine 2000).
     nd	       str		   Non-destructive space (cursor right).
     NL	       bool	 (o)	   \n is newline, not line feed.
     nl	       str	 (o)	   Newline character if not \n.
     ns	       bool	 (o)	   Terminal doesn't scroll.
     nw	       str	 (P)	   Newline (behaves like cr followed by do).
     OP	       bool	 (o)	   Odd parity.
     os	       bool		   Terminal overstrikes.
     pb	       num		   Lowest baud where delays are required.
     pc	       str		   Pad character (default NUL ).
     pf	       str		   Turn off the printer.
     pk	       str		   Program function key n to type string s
				   (terminfo only).
     pl	       str		   Program function key n to execute string s
				   (terminfo only).
     pO	       str	 (N)	   Turn on the printer for n bytes.
     po	       str		   Turn on the printer.
     ps	       str		   Print contents of the screen.
     pt	       bool	 (o)	   Has hardware tabs (may need to be set with
				   is).
     px	       str		   Program function key n to transmit string s
				   (terminfo only).
     r1-r3     str		   Reset terminal completely to sane modes
				   (terminfo only).
     rc	       str	 (P)	   Restore cursor to position of last sc.
     rf	       str		   Name of file containing reset codes.
     RI	       str	 (NP)	   Move cursor right n positions.
     rp	       str	 (NP*)	   Repeat character c n times.
     rs	       str		   Reset terminal completely to sane modes
				   (termcap only).
     sa	       str	 (NP)	   Define the video attributes.
     sc	       str	 (P)	   Save cursor position.
     se	       str		   End standout mode.
     SF	       str	 (NP*)	   Scroll forward n lines.
     sf	       str	 (P)	   Scroll text up.
     sg	       num		   Number of garbage chars left by so or se
				   (default 0).
     so	       str		   Begin standout mode.
     SR	       str	 (NP*)	   Scroll backward n lines.
     sr	       str	 (P)	   Scroll text down.
     st	       str		   Set a tab in all rows, current column.
     ta	       str	 (P)	   Tab to next 8-position hardware tab stop.
     tc	       str		   Entry of similar terminal; must be last.
     te	       str		   String to end programs that use termcap.
     ti	       str		   String to begin programs that use termcap.
     ts	       str	 (N)	   Go to status line, column n.
     UC	       bool	 (o)	   Upper-case only.
     uc	       str		   Underscore one character and move past it.
     ue	       str		   End underscore mode.
     ug	       num		   Number of garbage chars left by us or ue
				   (default 0).
     ul	       bool		   Underline character overstrikes.
     UP	       str	 (NP*)	   Move cursor up n lines.
     up	       str		   Upline (cursor up).
     us	       str		   Start underscore mode.
     vb	       str		   Visible bell (must not move cursor).
     ve	       str		   Make cursor appear normal (undo vs/vi).
     vi	       str		   Make cursor invisible.
     vs	       str		   Make cursor very visible.
     vt	       num		   Virtual terminal number (not supported on
				   all systems).
     wi	       str	 (N)	   Set current window.
     ws	       num		   Number of columns in status line.
     xb	       bool		   Beehive (f1= ESC, f2=^C).
     xn	       bool		   Newline ignored after 80 columns (Concept).
     xo	       bool		   Terminal uses xoff/xon (DC3/DC1)
				   handshaking.
     xr	       bool	 (o)	   Return acts like ce cr nl (Delta Data).
     xs	       bool		   Standout not erased by overwriting
				   (Hewlett-Packard).
     xt	       bool		   Tabs ruin, magic so char (Teleray 1061).
     xx	       bool	 (o)	   Tektronix 4025 insert-line.

   A Sample Entry
     The following entry, which describes the Concept-100, is among the more
     complex entries in the termcap file as of this writing.

     ca|concept100|c100|concept|c104|concept100-4p|HDS Concept-100:\
	     :al=3*\E^R:am:bl=^G:cd=16*\E^C:ce=16\E^U:cl=2*^L:cm=\Ea%+ %+ :\
	     :co#80:.cr=9^M:db:dc=16\E^A:dl=3*\E^B:do=^J:ei=\E\200:eo:im=\E^P:in:\
	     :ip=16*:is=\EU\Ef\E7\E5\E8\El\ENH\EK\E\200\Eo&\200\Eo\47\E:k1=\E5:\
	     :k2=\E6:k3=\E7:kb=^h:kd=\E<:ke=\Ex:kh=\E?:kl=\E>:kr=\E=:ks=\EX:\
	     :ku=\E;:le=^H:li#24:mb=\EC:me=\EN\200:mh=\EE:mi:mk=\EH:mp=\EI:\
	     :mr=\ED:nd=\E=:pb#9600:rp=0.2*\Er%.%+ :se=\Ed\Ee:sf=^J:so=\EE\ED:\
	     :.ta=8\t:te=\Ev	\200\200\200\200\200\200\Ep\r\n:\
	     :ti=\EU\Ev	 8p\Ep\r:ue=\Eg:ul:up=\E;:us=\EG:\
	     :vb=\Ek\200\200\200\200\200\200\200\200\200\200\200\200\200\200\EK:\
	     :ve=\Ew:vs=\EW:vt#8:xn:\
	     :bs:cr=^M:dC#9:dT#8:nl=^J:ta=^I:pt:

     Entries may continue onto multiple lines by giving a `\' as the last
     character of a line, and empty fields may be included for readability
     (here between the last field on a line and the first field on the next).
     Comments may be included on lines beginning with `#'.

   Types of Capabilities
     Capabilities in termcap are of three types: Boolean capabilities, which
     indicate particular features that the terminal has; numeric capabilities,
     giving the size of the display or the size of other attributes; and
     string capabilities, which give character sequences that can be used to
     perform particular terminal operations.  All capabilities have two-letter
     codes.  For instance, the fact that the Concept has automatic margins (an
     automatic return and linefeed when the end of a line is reached) is
     indicated by the Boolean capability am.  Hence the description of the
     Concept includes am.

     Boolean capabilities are defined by their name, fo.  They have no
     argument.	The presence of a boolean capability name sets its value to
     true.  A capability value will be reverted to false, by appending a @
     char after the name, such as fo@.

     Numeric capabilities are followed by the character `#' then the value.
     In the example above co, which indicates the number of columns the
     display has, gives the value `80' for the Concept.

     Finally, string-valued capabilities, such as ce (clear-to-end-of-line
     sequence) are given by the two-letter code, an `=', then a string ending
     at the next following `:'.	 A delay in milliseconds may appear after the
     `=' in such a capability, which causes padding characters to be supplied
     by tputs(3) after the remainder of the string is sent to provide this
     delay.  The delay can be either a number, such as `20', or a number
     followed by an `*', such as `3*'.	An `*' indicates that the padding
     required is proportional to the number of lines affected by the
     operation, and the amount given is the per-affected-line padding
     required.	(In the case of insert-character, the factor is still the
     number of lines affected; this is always 1 unless the terminal has in and
     the software uses it.)  When an `*' is specified, it is sometimes useful
     to give a delay of the form `3.5' to specify a delay per line to tenths
     of milliseconds.  (Only one decimal place is allowed.)

     A number of escape sequences are provided in the string-valued
     capabilities for easy encoding of control characters there.  \E maps to
     an ESC character, ^X maps to a control-X for any appropriate X, and the
     sequences \n \r \t \b \f map to linefeed, return, tab, backspace, and
     formfeed, respectively.  Finally, characters may be given as three octal
     digits after a \, and the characters ^ and \ may be given as \^ and \\.
     If it is necessary to place a : in a capability it must be escaped in
     octal as \072.  If it is necessary to place a NUL character in a string
     capability it must be encoded as \200.  (The routines that deal with
     termcap use C strings and strip the high bits of the output very late, so
     that a \200 comes out as a \000 would.)

     Sometimes individual capabilities must be commented out.  To do this, put
     a period before the capability name.  For example, see the first cr and
     ta in the example above.

   Preparing Descriptions
     The most effective way to prepare a terminal description is by imitating
     the description of a similar terminal in termcap and to build up a
     description gradually, using partial descriptions with vi(1) to check
     that they are correct.  Be aware that a very unusual terminal may expose
     deficiencies in the ability of the termcap file to describe it or bugs in
     vi(1).  To easily test a new terminal description you are working on you
     can put it in your home directory in a file called .termcap and programs
     will look there before looking in /usr/share/misc/termcap.	 You can also
     set the environment variable TERMPATH to a list of absolute file
     pathnames (separated by spaces or colons), one of which contains the
     description you are working on, and programs will search them in the
     order listed, and nowhere else.  See termcap(3).  The TERMCAP environment
     variable is usually set to the termcap entry itself to avoid reading
     files when starting up a program.

     To get the padding for insert-line right (if the terminal manufacturer
     did not document it), a severe test is to use vi(1) to edit /etc/passwd
     at 9600 baud, delete roughly 16 lines from the middle of the screen, then
     hit the `u' key several times quickly.  If the display messes up, more
     padding is usually needed.	 A similar test can be used for insert-
     character.

   Basic Capabilities
     The number of columns on each line of the display is given by the co
     numeric capability.  If the display is a terminal, then the number of
     lines on the screen is given by the li capability.	 If the display wraps
     around to the beginning of the next line when the cursor reaches the
     right margin, then it should have the am capability.  If the terminal can
     clear its screen, the code to do this is given by the cl string
     capability.  If the terminal overstrikes (rather than clearing the
     position when a character is overwritten), it should have the os
     capability.  If the terminal is a printing terminal, with no soft copy
     unit, give it both hc and os.  (os applies to storage scope terminals,
     such as the Tektronix 4010 series, as well as to hard copy and APL
     terminals.)  If there is a code to move the cursor to the left edge of
     the current row, give this as cr.	(Normally this will be carriage-
     return, ^M.) If there is a code to produce an audible signal (bell, beep,
     etc.), give this as bl.

     If there is a code (such as backspace) to move the cursor one position to
     the left, that capability should be given as le.  Similarly, codes to
     move to the right, up, and down should be given as nd, up, and do,
     respectively.  These local cursor motions should not alter the text they
     pass over; for example, you would not normally use ``nd= '' unless the
     terminal has the os capability, because the space would erase the
     character moved over.

     A very important point here is that the local cursor motions encoded in
     termcap have undefined behavior at the left and top edges of a terminal.
     Programs should never attempt to backspace around the left edge, unless
     bw is given, and never attempt to go up off the top using local cursor
     motions.

     In order to scroll text up, a program goes to the bottom left corner of
     the screen and sends the sf (index) string.  To scroll text down, a
     program goes to the top left corner of the screen and sends the sr
     (reverse index) string.  The strings sf and sr have undefined behavior
     when not on their respective corners of the screen.  Parameterized
     versions of the scrolling sequences are SF and SR, which have the same
     semantics as sf and sr except that they take one parameter and scroll
     that many lines.  They also have undefined behavior except at the
     appropriate corner of the screen.

     The am capability tells whether the cursor sticks at the right edge of
     the screen when text is output there, but this does not necessarily apply
     to nd from the last column.  Leftward local motion is defined from the
     left edge only when bw is given; then an le from the left edge will move
     to the right edge of the previous row.  This is useful for drawing a box
     around the edge of the screen, for example.  If the terminal has switch-
     selectable automatic margins, the termcap description usually assumes
     that this feature is on, i.e. am.	If the terminal has a command that
     moves to the first column of the next line, that command can be given as
     nw (newline).  It is permissible for this to clear the remainder of the
     current line, so if the terminal has no correctly working CR and LF it
     may still be possible to craft a working nw out of one or both of them.

     These capabilities suffice to describe hardcopy and ``glass-tty''
     terminals.	 Thus the Teletype model 33 is described as

	   T3|tty33|33|tty|Teletype model 33:\
		   :bl=^G:co#72:cr=^M:do=^J:hc:os:

     and the Lear Siegler ADM-3 is described as

	   l3|adm3|3|LSI ADM-3:\
	   :am:bl=^G:cl=^Z:co#80:cr=^M:do=^J:le=^H:li#24:sf=^J:

   Parameterized Strings
     Cursor addressing and other strings requiring parameters are described by
     a parameterized string capability, with printf(3)-like escapes %x in it,
     while other characters are passed through unchanged.  For example, to
     address the cursor the cm capability is given, using two parameters: the
     row and column to move to.	 (Rows and columns are numbered from zero and
     refer to the physical screen visible to the user, not to any unseen
     memory.  If the terminal has memory-relative cursor addressing, that can
     be indicated by an analogous CM capability.)

     The % encodings have the following meanings:

     %%	      output `%'
     %d	      output value as in printf(3) %d
     %2	      output value as in printf(3) %2d
     %3	      output value as in printf(3) %3d
     %.	      output value as in printf(3) %c
     %+x      add x to value, then do %.
     %>xy     if value > x then add y, no output
     %r	      reverse order of two parameters, no output
     %i	      increment by one, no output
     %n	      exclusive-or all parameters with 0140 (Datamedia 2500)
     %B	      BCD (16*(value/10)) + (value%10), no output
     %D	      Reverse coding (value - 2*(value%16)), no output (Delta Data).

     Consider the Hewlett-Packard 2645, which, to get to row 3 and column 12,
     needs to be sent ``\E&a12c03Y'' padded for 6 milliseconds.	 Note that the
     order of the row and column coordinates is reversed here and that the row
     and column are sent as two-digit integers.	 Thus its cm capability is
     ``cm=6\E&%r%2c%2Y''.

     The Datamedia 2500 needs the current row and column sent encoded in
     binary using ``%.''.  Terminals that use ``%.'' need to be able to
     backspace the cursor (le) and to move the cursor up one line on the
     screen (up).  This is necessary because it is not always safe to transmit
     \n, ^D, and \r, as the system may change or discard them.	(Programs
     using termcap must set terminal modes so that tabs are not expanded, so
     \t is safe to send.  This turns out to be essential for the Ann Arbor
     4080.)

     A final example is the Lear Siegler ADM-3a, which offsets row and column
     by a blank character, thus ``cm=\E=%+ %+ ''.

     Row or column absolute cursor addressing can be given as single parameter
     capabilities ch (horizontal position absolute) and cv (vertical position
     absolute).	 Sometimes these are shorter than the more general two-
     parameter sequence (as with the Hewlett-Packard 2645) and can be used in
     preference to cm.	If there are parameterized local motions (e.g., move n
     positions to the right) these can be given as DO, LE, RI, and UP with a
     single parameter indicating how many positions to move.  These are
     primarily useful if the terminal does not have cm, such as the Tektronix
     4025.

   Cursor Motions
     If the terminal has a fast way to home the cursor (to the very upper left
     corner of the screen), this can be given as ho.  Similarly, a fast way of
     getting to the lower left-hand corner can be given as ll; this may
     involve going up with up from the home position, but a program should
     never do this itself (unless ll does), because it can make no assumption
     about the effect of moving up from the home position.  Note that the home
     position is the same as cursor address (0,0): to the top left corner of
     the screen, not of memory.	 (Therefore, the ``\EH'' sequence on Hewlett-
     Packard terminals cannot be used for ho.)

   Area Clears
     If the terminal can clear from the current position to the end of the
     line, leaving the cursor where it is, this should be given as ce.	If the
     terminal can clear from the current position to the end of the display,
     this should be given as cd.  cd must only be invoked from the first
     column of a line.	(Therefore, it can be simulated by a request to delete
     a large number of lines, if a true cd is not available.)

   Insert/Delete Line
     If the terminal can open a new blank line before the line containing the
     cursor, this should be given as al; this must be invoked only from the
     first position of a line.	The cursor must then appear at the left of the
     newly blank line.	If the terminal can delete the line that the cursor is
     on, this should be given as dl; this must only be used from the first
     position on the line to be deleted.  Versions of al and dl which take a
     single parameter and insert or delete that many lines can be given as AL
     and DL.  If the terminal has a settable scrolling region (like the
     VT100), the command to set this can be described with the cs capability,
     which takes two parameters: the top and bottom lines of the scrolling
     region.  The cursor position is, alas, undefined after using this
     command.  It is possible to get the effect of insert or delete line using
     this command -- the sc and rc (save and restore cursor) commands are also
     useful.  Inserting lines at the top or bottom of the screen can also be
     done using sr or sf on many terminals without a true insert/delete line,
     and is often faster even on terminals with those features.

     If the terminal has the ability to define a window as part of memory
     which all commands affect, it should be given as the parameterized string
     wi.  The four parameters are the starting and ending lines in memory and
     the starting and ending columns in memory, in that order.	(This
     terminfo(5) capability is described for completeness.  It is unlikely
     that any termcap-using program will support it.)

     If the terminal can retain display memory above the screen, then the da
     capability should be given; if display memory can be retained below, then
     db should be given.  These indicate that deleting a line or scrolling may
     bring non-blank lines up from below or that scrolling back with sr may
     bring down non-blank lines.

   Insert/Delete Character
     There are two basic kinds of intelligent terminals with respect to
     insert/delete character that can be described using termcap.  The most
     common insert/delete character operations affect only the characters on
     the current line and shift characters off the end of the line rigidly.
     Other terminals, such as the Concept-100 and the Perkin Elmer Owl, make a
     distinction between typed and untyped blanks on the screen, shifting upon
     an insert or delete only to an untyped blank on the screen which is
     either eliminated or expanded to two untyped blanks.  You can determine
     the kind of terminal you have by clearing the screen then typing text
     separated by cursor motions.  Type ``abc	 def'' using local cursor
     motions (not spaces) between the ``abc'' and the ``def''.	Then position
     the cursor before the ``abc'' and put the terminal in insert mode.	 If
     typing characters causes the rest of the line to shift rigidly and
     characters to fall off the end, then your terminal does not distinguish
     between blanks and untyped positions.  If the ``abc'' shifts over to the
     ``def'' which then move together around the end of the current line and
     onto the next as you insert, then you have the second type of terminal
     and should give the capability in, which stands for ``insert null''.
     While these are two logically separate attributes (one line vs.  multi-
     line insert mode, and special treatment of untyped spaces), we have seen
     no terminals whose insert mode cannot be described with the single
     attribute.

     termcap can describe both terminals that have an insert mode and
     terminals that send a simple sequence to open a blank position on the
     current line.  Give as im the sequence to get into insert mode.  Give as
     ei the sequence to leave insert mode.  Now give as ic any sequence that
     needs to be sent just before each character to be inserted.  Most
     terminals with a true insert mode will not give ic; terminals that use a
     sequence to open a screen position should give it here.  (If your
     terminal has both, insert mode is usually preferable to ic.  Do not give
     both unless the terminal actually requires both to be used in
     combination.)  If post-insert padding is needed, give this as a number of
     milliseconds in ip (a string option).  Any other sequence that may need
     to be sent after insertion of a single character can also be given in ip.
     If your terminal needs to be placed into an `insert mode' and needs a
     special code preceding each inserted character, then both im/ ei and ic
     can be given, and both will be used.  The IC capability, with one
     parameter n, will repeat the effects of ic n times.

     It is occasionally necessary to move around while in insert mode to
     delete characters on the same line (e.g., if there is a tab after the
     insertion position).  If your terminal allows motion while in insert
     mode, you can give the capability mi to speed up inserting in this case.
     Omitting mi will affect only speed.  Some terminals (notably Datamedia's)
     must not have mi because of the way their insert mode works.

     Finally, you can specify dc to delete a single character, DC with one
     parameter n to delete n characters, and delete mode by giving dm and ed
     to enter and exit delete mode (which is any mode the terminal needs to be
     placed in for dc to work).

   Highlighting, Underlining, and Visible Bells
     If your terminal has one or more kinds of display attributes, these can
     be represented in a number of different ways.  You should choose one
     display form as standout mode, representing a good high-contrast, easy-
     on-the-eyes format for highlighting error messages and other attention
     getters.  (If you have a choice, reverse video plus half-bright is good,
     or reverse video alone.)  The sequences to enter and exit standout mode
     are given as so and se, respectively.  If the code to change into or out
     of standout mode leaves one or even two blank spaces or garbage
     characters on the screen, as the TVI 912 and Teleray 1061 do, then sg
     should be given to tell how many characters are left.

     Codes to begin underlining and end underlining can be given as us and ue,
     respectively.  Underline mode change garbage is specified by ug, similar
     to sg.  If the terminal has a code to underline the current character and
     move the cursor one position to the right, such as the Microterm Mime,
     this can be given as uc.

     Other capabilities to enter various highlighting modes include mb
     (blinking), md (bold or extra bright), mh (dim or half-bright), mk
     (blanking or invisible text), mp (protected), mr (reverse video), me
     (turn off all attribute modes), as (enter alternate character set mode),
     and ae (exit alternate character set mode).  Turning on any of these
     modes singly may or may not turn off other modes.

     If there is a sequence to set arbitrary combinations of mode, this should
     be given as sa (set attributes), taking 9 parameters.  Each parameter is
     either 0 or 1, as the corresponding attributes is on or off.  The 9
     parameters are, in order: standout, underline, reverse, blink, dim, bold,
     blank, protect, and alternate character set.  Not all modes need be
     supported by sa, only those for which corresponding attribute commands
     exist.  (It is unlikely that a termcap-using program will support this
     capability, which is defined for compatibility with terminfo(5).)

     Terminals with the ``magic cookie'' glitches (sg and ug), rather than
     maintaining extra attribute bits for each character cell, instead deposit
     special ``cookies'', or ``garbage characters'', when they receive mode-
     setting sequences, which affect the display algorithm.

     Some terminals, such as the Hewlett-Packard 2621, automatically leave
     standout mode when they move to a new line or when the cursor is
     addressed.	 Programs using standout mode should exit standout mode on
     such terminals before moving the cursor or sending a newline.  On
     terminals where this is not a problem, the ms capability should be
     present to say that this overhead is unnecessary.

     If the terminal has a way of flashing the screen to indicate an error
     quietly (a bell replacement), this can be given as vb; it must not move
     the cursor.

     If the cursor needs to be made more visible than normal when it is not on
     the bottom line (to change, for example, a non-blinking underline into an
     easier-to-find block or blinking underline), give this sequence as vs.
     If there is a way to make the cursor completely invisible, give that as
     vi.  The capability ve, which undoes the effects of both of these modes,
     should also be given.

     If your terminal correctly displays underlined characters (with no
     special codes needed) even though it does not overstrike, then you should
     give the capability ul.  If overstrikes are erasable with a blank, this
     should be indicated by giving eo.

   Keypad
     If the terminal has a keypad that transmits codes when the keys are
     pressed, this information can be given.  Note that it is not possible to
     handle terminals where the keypad only works in local mode (this applies,
     for example, to the unshifted Hewlett-Packard 2621 keys).	If the keypad
     can be set to transmit or not transmit, give these codes as ks and ke.
     Otherwise the keypad is assumed to always transmit.  The codes sent by
     the left-arrow, right-arrow, up-arrow, down-arrow, and home keys can be
     given as kl, kr, ku, kd, and kh, respectively.  If there are function
     keys such as f0, f1, ..., f9, the codes they send can be given as k0, k1,
     ..., k9.  If these keys have labels other than the default f0 through f9,
     the labels can be given as l0, l1, ..., l9.  The codes transmitted by
     certain other special keys can be given: kH (home down), kb (backspace),
     ka (clear all tabs), kt (clear the tab stop in this column), kC (clear
     screen or erase), kD (delete character), kL (delete line), kM (exit
     insert mode), kE (clear to end of line), kS (clear to end of screen), kI
     (insert character or enter insert mode), kA (insert line), kN (next
     page), kP (previous page), kF (scroll forward/down), kR (scroll
     backward/up), and kT (set a tab stop in this column).  In addition, if
     the keypad has a 3 by 3 array of keys including the four arrow keys, then
     the other five keys can be given as K1, K2, K3, K4, and K5.  These keys
     are useful when the effects of a 3 by 3 directional pad are needed.  The
     obsolete ko capability formerly used to describe ``other'' function keys
     has been completely supplanted by the above capabilities.

     The ma entry is also used to indicate arrow keys on terminals that have
     single-character arrow keys.  It is obsolete but still in use in version
     2 of vi which must be run on some minicomputers due to memory
     limitations.  This field is redundant with kl, kr, ku, kd, and kh.	 It
     consists of groups of two characters.  In each group, the first character
     is what an arrow key sends, and the second character is the corresponding
     vi command.  These commands are h for kl, j for kd, k for ku, l for kr,
     and H for kh.  For example, the Mime would have ``ma=^Hh^Kj^Zk^Xl''
     indicating arrow keys left (^H), down (^K), up (^Z), and right (^X).
     (There is no home key on the Mime.)

   Tabs and Initialization
     If the terminal needs to be in a special mode when running a program that
     uses these capabilities, the codes to enter and exit this mode can be
     given as ti and te.  This arises, for example, from terminals like the
     Concept with more than one page of memory.	 If the terminal has only
     memory-relative cursor addressing and not screen-relative cursor
     addressing, a screen-sized window must be fixed into the display for
     cursor addressing to work properly.  This is also used for the Tektronix
     4025, where ti sets the command character to be the one used by termcap.

     Other capabilities include is, an initialization string for the terminal,
     and if, the name of a file containing long initialization strings.	 These
     strings are expected to set the terminal into modes consistent with the
     rest of the termcap description.  They are normally sent to the terminal
     by the tset(1) program each time the user logs in.	 They will be printed
     in the following order: is; setting tabs using ct and st; and finally if.
     (Terminfo uses i1-i2 instead of is and runs the program iP and prints i3
     after the other initializations.)	A pair of sequences that does a harder
     reset from a totally unknown state can be analogously given as rs and if.
     These strings are output by the reset(1) program, which is used when the
     terminal gets into a wedged state.	 (Terminfo uses r1-r3 instead of rs.)
     Commands are normally placed in rs and rf only if they produce annoying
     effects on the screen and are not necessary when logging in.  For
     example, the command to set the VT100 into 80-column mode would normally
     be part of is, but it causes an annoying glitch of the screen and is not
     normally needed since the terminal is usually already in 80-column mode.

     If the terminal has hardware tabs, the command to advance to the next tab
     stop can be given as ta (usually ^I).  A ``backtab'' command which moves
     leftward to the previous tab stop can be given as bt.  By convention, if
     the terminal driver modes indicate that tab stops are being expanded by
     the computer rather than being sent to the terminal, programs should not
     use ta or bt even if they are present, since the user may not have the
     tab stops properly set.  If the terminal has hardware tabs that are
     initially set every n positions when the terminal is powered up, then the
     numeric parameter it is given, showing the number of positions between
     tab stops.	 This is normally used by the tset(1) command to determine
     whether to set the driver mode for hardware tab expansion, and whether to
     set the tab stops.	 If the terminal has tab stops that can be saved in
     nonvolatile memory, the termcap description can assume that they are
     properly set.

     If there are commands to set and clear tab stops, they can be given as ct
     (clear all tab stops) and st (set a tab stop in the current column of
     every row).  If a more complex sequence is needed to set the tabs than
     can be described by this, the sequence can be placed in is or if.

   Delays
     Certain capabilities control padding in the terminal driver.  These are
     primarily needed by hardcopy terminals and are used by the tset(1)
     program to set terminal driver modes appropriately.  Delays embedded in
     the capabilities cr, sf, le, ff, and ta will cause the appropriate delay
     bits to be set in the terminal driver.  If pb (padding baud rate) is
     given, these values can be ignored at baud rates below the value of pb.
     For 4.2BSD tset(1), the delays are given as numeric capabilities dC, dN,
     dB, dF, and dT instead.

   Miscellaneous
     If the terminal requires other than a NUL (zero) character as a pad, this
     can be given as pc.  Only the first character of the pc string is used.

     If the terminal has commands to save and restore the position of the
     cursor, give them as sc and rc.

     If the terminal has an extra ``status line'' that is not normally used by
     software, this fact can be indicated.  If the status line is viewed as an
     extra line below the bottom line, then the capability hs should be given.
     Special strings to go to a position in the status line and to return from
     the status line can be given as ts and fs.	 (fs must leave the cursor
     position in the same place that it was before ts.	If necessary, the sc
     and rc strings can be included in ts and fs to get this effect.)  The
     capability ts takes one parameter, which is the column number of the
     status line to which the cursor is to be moved.  If escape sequences and
     other special commands such as tab work while in the status line, the
     flag es can be given.  A string that turns off the status line (or
     otherwise erases its contents) should be given as ds.  The status line is
     normally assumed to be the same width as the rest of the screen, i.e. co.
     If the status line is a different width (possibly because the terminal
     does not allow an entire line to be loaded), then its width in columns
     can be indicated with the numeric parameter ws.

     If the terminal can move up or down half a line, this can be indicated
     with hu (half-line up) and hd (half-line down).  This is primarily useful
     for superscripts and subscripts on hardcopy terminals.  If a hardcopy
     terminal can eject to the next page (form feed), give this as ff (usually
     ^L).

     If there is a command to repeat a given character a given number of times
     (to save time transmitting a large number of identical characters), this
     can be indicated with the parameterized string rp.	 The first parameter
     is the character to be repeated and the second is the number of times to
     repeat it.	 (This is a terminfo(5) feature that is unlikely to be
     supported by a program that uses termcap.)

     If the terminal has a settable command character, such as the Tektronix
     4025, this can be indicated with CC.  A prototype command character is
     chosen which is used in all capabilities.	This character is given in the
     CC capability to identify it.  The following convention is supported on
     some UNIX systems: The environment is to be searched for a CC variable,
     and if found, all occurrences of the prototype character are replaced by
     the character in the environment variable.	 This use of the CC
     environment variable is a very bad idea, as it conflicts with make(1).

     Terminal descriptions that do not represent a specific kind of known
     terminal, such as switch, dialup, patch, and network, should include the
     gn (generic) capability so that programs can complain that they do not
     know how to talk to the terminal.	(This capability does not apply to
     virtual terminal descriptions for which the escape sequences are known.)

     If the terminal uses xoff/xon (DC3/DC1) handshaking for flow control,
     give xo.  Padding information should still be included so that routines
     can make better decisions about costs, but actual pad characters will not
     be transmitted.

     If the terminal has a ``meta key'' which acts as a shift key, setting the
     8th bit of any character transmitted, then this fact can be indicated
     with km.  Otherwise, software will assume that the 8th bit is parity and
     it will usually be cleared.  If strings exist to turn this ``meta mode''
     on and off, they can be given as mm and mo.

     If the terminal has more lines of memory than will fit on the screen at
     once, the number of lines of memory can be indicated with lm.  An
     explicit value of 0 indicates that the number of lines is not fixed, but
     that there is still more memory than fits on the screen.

     If the terminal is one of those supported by the UNIX system virtual
     terminal protocol, the terminal number can be given as vt.

     Media copy strings which control an auxiliary printer connected to the
     terminal can be given as ps: print the contents of the screen; pf: turn
     off the printer; and po: turn on the printer.  When the printer is on,
     all text sent to the terminal will be sent to the printer.	 It is
     undefined whether the text is also displayed on the terminal screen when
     the printer is on.	 A variation pO takes one parameter and leaves the
     printer on for as many characters as the value of the parameter, then
     turns the printer off.  The parameter should not exceed 255.  All text,
     including pf, is transparently passed to the printer while pO is in
     effect.

     Strings to program function keys can be given as pk, pl, and px.  Each of
     these strings takes two parameters: the function key number to program
     (from 0 to 9) and the string to program it with.  Function key numbers
     out of this range may program undefined keys in a terminal-dependent
     manner.  The differences among the capabilities are that pk causes
     pressing the given key to be the same as the user typing the given
     string; pl causes the string to be executed by the terminal in local
     mode; and px causes the string to be transmitted to the computer.
     Unfortunately, due to lack of a definition for string parameters in
     termcap, only terminfo(5) supports these capabilities.

   Glitches and Brain-damage
     Hazeltine terminals, which do not allow `~' characters to be displayed,
     should indicate hz.

     The nc capability, now obsolete, formerly indicated Datamedia terminals,
     which echo \r \n for carriage return then ignore a following linefeed.

     Terminals that ignore a linefeed immediately after an am wrap, such as
     the Concept, should indicate xn.

     If ce is required to get rid of standout (instead of merely writing
     normal text on top of it), xs should be given.

     Teleray terminals, where tabs turn all characters moved over to blanks,
     should indicate xt (destructive tabs).  This glitch is also taken to mean
     that it is not possible to position the cursor on top of a ``magic
     cookie'', and that to erase standout mode it is necessary to use delete
     and insert line.

     The Beehive Superbee, which is unable to correctly transmit the ESC or ^C
     characters, has xb, indicating that the ``f1'' key is used for ESC and
     ``f2'' for ^C.  (Only certain Superbees have this problem, depending on
     the ROM.)

     Other specific terminal problems may be corrected by adding more
     capabilities of the form x x.

   Similar Terminals
     If there are two very similar terminals, one can be defined as being just
     like the other with certain exceptions.  The string capability tc can be
     given with the name of the similar terminal.  This capability must be
     last, and the combined length of the entries must not exceed 1024.	 The
     capabilities given before tc override those in the terminal type invoked
     by tc.  A capability can be cancelled by placing xx@ to the left of the
     tc invocation, where xx is the capability.	 For example, the entry

	   hn|2621-nl:ks@:ke@:tc=2621:

     defines a ``2621-nl'' that does not have the ks or ke capabilities, hence
     does not turn on the function key labels when in visual mode.  This is
     useful for different modes for a terminal, or for different user
     preferences.

FILES
     /usr/share/misc/termcap	 File containing terminal descriptions.
     /usr/share/misc/termcap.db	 Hash database file containing terminal
				 descriptions (see cap_mkdb(1)).

SEE ALSO
     cap_mkdb(1), ex(1), more(1), tset(1), ul(1), vi(1), curses(3), printf(3),
     termcap(3), terminfo(3), terminfo(5), term(7)

HISTORY
     The termcap file format appeared in 3BSD.

CAVEATS
     The termcap functions were replaced by terminfo(5) in AT&T System V UNIX
     Release 2.0.  The transition will be relatively painless if capabilities
     flagged as ``obsolete'' are avoided.

BUGS
     Lines and columns are now stored by the kernel as well as in the termcap
     entry.  Most programs now use the kernel information primarily; the
     information in this file is used only if the kernel does not have any
     information.

     vi(1) allows only 256 characters for string capabilities, and the
     routines in termcap(3) do not check for overflow of this buffer.  The
     total length of a single entry (excluding only escaped newlines) may not
     exceed 1024.

     Not all programs support all entries.

OpenBSD 4.9			 July 22, 2010			   OpenBSD 4.9
[top]

List of man pages available for OpenBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net