waitpid man page on LinuxMint

Man page or keyword search:  
man Server   4994 pages
apropos Keyword Search (all sections)
Output format
LinuxMint logo
[printable version]

WAIT(2)			   Linux Programmer's Manual		       WAIT(2)

NAME
       wait, waitpid, waitid - wait for process to change state

SYNOPSIS
       #include <sys/types.h>
       #include <sys/wait.h>

       pid_t wait(int *status);

       pid_t waitpid(pid_t pid, int *status, int options);

       int waitid(idtype_t idtype, id_t id, siginfo_t *infop, int options);
		       /* This is the glibc and POSIX interface; see
			  NOTES for information on the raw system call. */

   Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

       waitid():
	   _SVID_SOURCE || _XOPEN_SOURCE >= 500 ||
	   _XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED
	   || /* Since glibc 2.12: */ _POSIX_C_SOURCE >= 200809L

DESCRIPTION
       All of these system calls are used to wait for state changes in a child
       of  the	calling	 process, and obtain information about the child whose
       state has changed.  A state change is considered to be: the child  ter‐
       minated; the child was stopped by a signal; or the child was resumed by
       a signal.  In the case of a terminated child, performing a wait	allows
       the  system  to	release	 the resources associated with the child; if a
       wait is not performed, then the terminated child remains in a  "zombie"
       state (see NOTES below).

       If  a  child has already changed state, then these calls return immedi‐
       ately.  Otherwise they block until either a child changes  state	 or  a
       signal  handler interrupts the call (assuming that system calls are not
       automatically restarted using the SA_RESTART flag of sigaction(2)).  In
       the  remainder  of this page, a child whose state has changed and which
       has not yet been waited upon by one of these  system  calls  is	termed
       waitable.

   wait() and waitpid()
       The  wait() system call suspends execution of the calling process until
       one of its children terminates.	The call wait(&status)	is  equivalent
       to:

	   waitpid(-1, &status, 0);

       The  waitpid()  system  call  suspends execution of the calling process
       until a child specified by pid argument has changed state.  By default,
       waitpid() waits only for terminated children, but this behavior is mod‐
       ifiable via the options argument, as described below.

       The value of pid can be:

       < -1   meaning wait for any child process whose	process	 group	ID  is
	      equal to the absolute value of pid.

       -1     meaning wait for any child process.

       0      meaning  wait  for  any  child process whose process group ID is
	      equal to that of the calling process.

       > 0    meaning wait for the child whose process	ID  is	equal  to  the
	      value of pid.

       The  value  of  options	is an OR of zero or more of the following con‐
       stants:

       WNOHANG	   return immediately if no child has exited.

       WUNTRACED   also return if a child has  stopped	(but  not  traced  via
		   ptrace(2)).	 Status for traced children which have stopped
		   is provided even if this option is not specified.

       WCONTINUED (since Linux 2.6.10)
		   also return if a stopped child has been resumed by delivery
		   of SIGCONT.

       (For Linux-only options, see below.)

       If status is not NULL, wait() and waitpid() store status information in
       the int to which it points.  This integer can  be  inspected  with  the
       following  macros  (which take the integer itself as an argument, not a
       pointer to it, as is done in wait() and waitpid()!):

       WIFEXITED(status)
	      returns true if the child terminated normally, that is, by call‐
	      ing exit(3) or _exit(2), or by returning from main().

       WEXITSTATUS(status)
	      returns  the  exit  status  of  the child.  This consists of the
	      least significant 8 bits of the status argument that  the	 child
	      specified	 in  a	call to exit(3) or _exit(2) or as the argument
	      for a return statement in main().	 This macro should be employed
	      only if WIFEXITED returned true.

       WIFSIGNALED(status)
	      returns true if the child process was terminated by a signal.

       WTERMSIG(status)
	      returns  the  number of the signal that caused the child process
	      to terminate.  This macro should be employed only if WIFSIGNALED
	      returned true.

       WCOREDUMP(status)
	      returns  true  if	 the  child  produced a core dump.  This macro
	      should be employed only  if  WIFSIGNALED	returned  true.	  This
	      macro  is	 not specified in POSIX.1-2001 and is not available on
	      some UNIX implementations (e.g., AIX,  SunOS).   Only  use  this
	      enclosed in #ifdef WCOREDUMP ... #endif.

       WIFSTOPPED(status)
	      returns  true  if the child process was stopped by delivery of a
	      signal; this is possible only if the call was  done  using  WUN‐
	      TRACED or when the child is being traced (see ptrace(2)).

       WSTOPSIG(status)
	      returns the number of the signal which caused the child to stop.
	      This macro should be employed only if WIFSTOPPED returned true.

       WIFCONTINUED(status)
	      (since Linux 2.6.10) returns  true  if  the  child  process  was
	      resumed by delivery of SIGCONT.

   waitid()
       The  waitid()  system  call (available since Linux 2.6.9) provides more
       precise control over which child state changes to wait for.

       The idtype and id arguments select the child(ren) to wait for, as  fol‐
       lows:

       idtype == P_PID
	      Wait for the child whose process ID matches id.

       idtype == P_PGID
	      Wait for any child whose process group ID matches id.

       idtype == P_ALL
	      Wait for any child; id is ignored.

       The  child state changes to wait for are specified by ORing one or more
       of the following flags in options:

       WEXITED	   Wait for children that have terminated.

       WSTOPPED	   Wait for children that have been stopped by delivery	 of  a
		   signal.

       WCONTINUED  Wait	 for  (previously  stopped)  children  that  have been
		   resumed by delivery of SIGCONT.

       The following flags may additionally be ORed in options:

       WNOHANG	   As for waitpid().

       WNOWAIT	   Leave the child in a waitable state; a later wait call  can
		   be used to again retrieve the child status information.

       Upon  successful	 return, waitid() fills in the following fields of the
       siginfo_t structure pointed to by infop:

       si_pid	   The process ID of the child.

       si_uid	   The real user ID of the child.  (This field is not  set  on
		   most other implementations.)

       si_signo	   Always set to SIGCHLD.

       si_status   Either  the	exit status of the child, as given to _exit(2)
		   (or exit(3)), or the signal that caused the child to termi‐
		   nate,  stop, or continue.  The si_code field can be used to
		   determine how to interpret this field.

       si_code	   Set	to  one	 of:  CLD_EXITED  (child   called   _exit(2));
		   CLD_KILLED  (child  killed  by  signal);  CLD_DUMPED (child
		   killed by signal,  and  dumped  core);  CLD_STOPPED	(child
		   stopped by signal); CLD_TRAPPED (traced child has trapped);
		   or CLD_CONTINUED (child continued by SIGCONT).

       If WNOHANG was specified in options and there were  no  children	 in  a
       waitable	 state,	 then  waitid() returns 0 immediately and the state of
       the siginfo_t structure pointed to by infop is unspecified.  To distin‐
       guish  this  case from that where a child was in a waitable state, zero
       out the si_pid field before the call and check for a nonzero  value  in
       this field after the call returns.

RETURN VALUE
       wait():	on success, returns the process ID of the terminated child; on
       error, -1 is returned.

       waitpid(): on success, returns the process ID of the child whose	 state
       has changed; if WNOHANG was specified and one or more child(ren) speci‐
       fied by pid exist, but have not yet changed state, then 0 is  returned.
       On error, -1 is returned.

       waitid():  returns  0  on  success  or  if WNOHANG was specified and no
       child(ren) specified by id has yet  changed  state;  on	error,	-1  is
       returned.   Each	 of  these calls sets errno to an appropriate value in
       the case of an error.

ERRORS
       ECHILD (for wait()) The calling process does not have any  unwaited-for
	      children.

       ECHILD (for  waitpid() or waitid()) The process specified by pid (wait‐
	      pid()) or idtype and id (waitid()) does not exist or  is	not  a
	      child  of	 the  calling process.	(This can happen for one's own
	      child if the action for SIGCHLD is set to SIG_IGN.  See also the
	      Linux Notes section about threads.)

       EINTR  WNOHANG  was  not	 set  and an unblocked signal or a SIGCHLD was
	      caught; see signal(7).

       EINVAL The options argument was invalid.

CONFORMING TO
       SVr4, 4.3BSD, POSIX.1-2001.

NOTES
       A child that terminates, but has not been waited for  becomes  a	 "zom‐
       bie".  The kernel maintains a minimal set of information about the zom‐
       bie process (PID, termination status, resource  usage  information)  in
       order to allow the parent to later perform a wait to obtain information
       about the child.	 As long as a zombie is not removed  from  the	system
       via  a wait, it will consume a slot in the kernel process table, and if
       this table fills, it will not be possible to create further  processes.
       If a parent process terminates, then its "zombie" children (if any) are
       adopted by init(8), which automatically performs a wait to  remove  the
       zombies.

       POSIX.1-2001  specifies	that  if  the disposition of SIGCHLD is set to
       SIG_IGN or the SA_NOCLDWAIT flag is set for SIGCHLD (see sigaction(2)),
       then children that terminate do not become zombies and a call to wait()
       or waitpid() will block until all children have	terminated,  and  then
       fail  with  errno set to ECHILD.	 (The original POSIX standard left the
       behavior of setting SIGCHLD to SIG_IGN  unspecified.   Note  that  even
       though  the default disposition of SIGCHLD is "ignore", explicitly set‐
       ting the disposition to SIG_IGN results in different treatment of  zom‐
       bie process children.)  Linux 2.6 conforms to this specification.  How‐
       ever, Linux 2.4 (and earlier) does not: if a wait() or  waitpid()  call
       is made while SIGCHLD is being ignored, the call behaves just as though
       SIGCHLD were not being ignored, that is, the call blocks until the next
       child  terminates  and  then  returns the process ID and status of that
       child.

   Linux notes
       In the Linux kernel, a kernel-scheduled thread is not a	distinct  con‐
       struct  from  a process.	 Instead, a thread is simply a process that is
       created using the Linux-unique clone(2)	system	call;  other  routines
       such  as	 the  portable	pthread_create(3)  call	 are implemented using
       clone(2).  Before Linux 2.4, a thread was just  a  special  case	 of  a
       process, and as a consequence one thread could not wait on the children
       of another thread, even when the latter	belongs	 to  the  same	thread
       group.	However,  POSIX prescribes such functionality, and since Linux
       2.4 a thread can, and by	 default  will,	 wait  on  children  of	 other
       threads in the same thread group.

       The  following Linux-specific options are for use with children created
       using clone(2); they cannot be used with waitid():

       __WCLONE
	      Wait for "clone" children only.  If omitted then wait for	 "non-
	      clone" children only.  (A "clone" child is one which delivers no
	      signal, or a signal other than SIGCHLD to its parent upon termi‐
	      nation.)	This option is ignored if __WALL is also specified.

       __WALL (since Linux 2.4)
	      Wait  for	 all  children,	 regardless  of type ("clone" or "non-
	      clone").

       __WNOTHREAD (since Linux 2.4)
	      Do not wait for children of other threads	 in  the  same	thread
	      group.  This was the default before Linux 2.4.

       The  raw	 waitid()  system  call	 takes a fith argument, of type struct
       rusage *.  If this argument is non-NULL, then  it  is  used  to	return
       resource	 usage	information  about  the	 child,	 in the same manner as
       wait4(2).  See getrusage(2) for details.

BUGS
       According to POSIX.1-2008, an application calling waitid() must	ensure
       that infop points to a siginfo_t structure (i.e., that it is a non-NULL
       pointer).  On Linux, if infop is NULL, waitid() succeeds,  and  returns
       the  process  ID	 of  the  waited-for child.  Applications should avoid
       relying on this inconsistent, nonstandard, and unnecessary feature.

EXAMPLE
       The following program demonstrates the use of  fork(2)  and  waitpid().
       The  program  creates  a child process.	If no command-line argument is
       supplied to the program, then the child suspends	 its  execution	 using
       pause(2),  to  allow the user to send signals to the child.  Otherwise,
       if a command-line argument is supplied, then the	 child	exits  immedi‐
       ately,  using the integer supplied on the command line as the exit sta‐
       tus.  The parent process executes a loop that monitors the child	 using
       waitpid(), and uses the W*() macros described above to analyze the wait
       status value.

       The following shell session demonstrates the use of the program:

	   $ ./a.out &
	   Child PID is 32360
	   [1] 32359
	   $ kill -STOP 32360
	   stopped by signal 19
	   $ kill -CONT 32360
	   continued
	   $ kill -TERM 32360
	   killed by signal 15
	   [1]+	 Done			 ./a.out
	   $

   Program source

       #include <sys/wait.h>
       #include <stdlib.h>
       #include <unistd.h>
       #include <stdio.h>

       int
       main(int argc, char *argv[])
       {
	   pid_t cpid, w;
	   int status;

	   cpid = fork();
	   if (cpid == -1) {
	       perror("fork");
	       exit(EXIT_FAILURE);
	   }

	   if (cpid == 0) {	       /* Code executed by child */
	       printf("Child PID is %ld\n", (long) getpid());
	       if (argc == 1)
		   pause();		       /* Wait for signals */
	       _exit(atoi(argv[1]));

	   } else {		       /* Code executed by parent */
	       do {
		   w = waitpid(cpid, &status, WUNTRACED | WCONTINUED);
		   if (w == -1) {
		       perror("waitpid");
		       exit(EXIT_FAILURE);
		   }

		   if (WIFEXITED(status)) {
		       printf("exited, status=%d\n", WEXITSTATUS(status));
		   } else if (WIFSIGNALED(status)) {
		       printf("killed by signal %d\n", WTERMSIG(status));
		   } else if (WIFSTOPPED(status)) {
		       printf("stopped by signal %d\n", WSTOPSIG(status));
		   } else if (WIFCONTINUED(status)) {
		       printf("continued\n");
		   }
	       } while (!WIFEXITED(status) && !WIFSIGNALED(status));
	       exit(EXIT_SUCCESS);
	   }
       }

SEE ALSO
       _exit(2), clone(2), fork(2),  kill(2),  ptrace(2),  sigaction(2),  sig‐
       nal(2), wait4(2), pthread_create(3), credentials(7), signal(7)

COLOPHON
       This  page  is  part of release 3.54 of the Linux man-pages project.  A
       description of the project, and information about reporting  bugs,  can
       be found at http://www.kernel.org/doc/man-pages/.

Linux				  2013-09-04			       WAIT(2)
[top]

List of man pages available for LinuxMint

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net