WSCONSCTL(8) BSD System Manager's Manual WSCONSCTL(8)NAMEwsconsctl - get or set wscons state
SYNOPSISwsconsctl [-d /dev/ttyC0] [-k /dev/wskdb0] [-m /dev/wsmouse0] [-n] -a
wsconsctl [-d /dev/ttyC0] [-k /dev/wskdb0] [-m /dev/wsmouse0] [-n] name
...
wsconsctl [-d /dev/ttyC0] [-k /dev/wskdb0] [-m /dev/wsmouse0] [-n]
name=value ...
wsconsctl [-d /dev/ttyC0] [-k /dev/wskdb0] [-m /dev/wsmouse0] [-n]
name+=value ...
DESCRIPTION
The wsconsctl command displays or sets various wscons system driver vari-
ables. If a list of variables is present on the command line, wsconsctl
prints the current value of those variables for the specified device.
Similarily, if a list of top-level entries is present, wsconsctl prints
the current values of their children.
The options are as follows:
-a Print all device variables and their current values.
-d ctldev
Set the control device for display to ctldev.
-k ctldev
Set the control device for keyboard to ctldev.
-m ctldev
Set the control device for mouse to ctldev.
-n Suppress printing of the variable name in the output.
name=value
Attempt to set the specified variable name to value. The value
can be specified as either an absolute, by using the '=' symbol,
or as a relative value, by using the '+=' symbol. See the
EXAMPLES section for more details.
The wsconsctl utility can be used to view and modify aspects of the key-
board, display, and mouse using the standard, machine-independent works-
tation console device driver wscons(4).
The keyboard type can be modified, the keyboard bell's pitch, period, and
duration can be modified, the typematic value can be changed, and the
keyboard encoding can be modified to switch keys, should the user find a
keyboard's default layout difficult to use.
There are also definitions relating to video control and cursor control,
which are not applicable to all display types, and to text emulation and
graphics (mapped) modes.
Use the kbd(8) utility to determine which keyboard encodings are avail-
able for your country.
FILES
/dev/ttyC0 display control device
/dev/wskbd0 keyboard control device
/dev/wsmouse0 mouse control device
/etc/wsconsctl.conf a list of parameters that get set at
system startup time from rc(8)
/usr/include/dev/wscons/wsconsio.h keyboard/mouse/display definitions
EXAMPLES
Set a UK keyboard encoding:
# wsconsctl keyboard.encoding=uk
Modify the current keyboard encoding so that, when the Caps Lock key is
pressed, the same encoding sequence as Left Control is sent. For a full
list of keysyms, and keycodes, please refer to the
/usr/include/dev/wscons/wsksymdef.h file.
# wsconsctl keyboard.map+="keysym Caps_Lock = Control_L"
Assign the Right Alt key to be the group modifier (layout is changed
while the key is pressed):
# wsconsctl keyboard.map+="keycode 184=Mode_switch"
Assign the Right Control key to be the lock for the group modifier. The
effect of Mode_Lock and Mode_switch is not mutually exclusive, to be con-
sistent with Caps Lock and Shift behaviour.
# wsconsctl keyboard.map+="keycode 157=Mode_Lock"
Set a US keyboard encoding, with the Caps Lock and Left Control keys
swapped. The .swapctrlcaps encoding does not work for all national key-
board encodings. For most purposes, the ability to set the value returned
by the Caps Lock key is enough - see the previous example for details.
# wsconsctl keyboard.encoding=us.swapctrlcaps
Set the bell pitch to be 1200:
# wsconsctl keyboard.bell.pitch=1200
Add 200 to the current pitch of the bell:
# wsconsctl keyboard.bell.pitch+=200
SEE ALSOpckbd(4), wscons(4), wsconsctl.conf(5), kbd(8), wsconscfg(8),
wsfontload(8)HISTORY
The wsconsctl command first appeared in NetBSD 1.4 and OpenBSD 2.8. The
ability to print subtrees, similar to sysctl(8), and the -d, -k, and -m
options first appeared in MirOS #11.
MirOS BSD #10-current December 4, 2008 1
