faxstat man page on Mandriva

Man page or keyword search:  
man Server   17060 pages
apropos Keyword Search (all sections)
Output format
Mandriva logo
[printable version]

FAXSTAT(1)							    FAXSTAT(1)

NAME
       faxstat - display HylaFAX status

SYNOPSIS
       faxstat [ options ]

DESCRIPTION
       faxstat	reports the status of HylaFAX servers, including (potentially)
       the status of the send, receive, done, document, and  archive  directo‐
       ries.   When invoked without options faxstat reports only the status of
       the server; the options described below can be used  to	override  this
       behavior.

       Server  status  information  indicates  the  state of the server (idle,
       sending, receiving, etc.)  and the phone number that is associated with
       the fax modem.

       The  job	 queue	report	give  the  status of facsimile jobs queued for
       transmission; by default:

       ·  the job identifier,

       ·  the job state (see below for the description of the a format in  the
	  JobFmt string),

       ·  the modem or modem class the job is bound to (``any'' if the job can
	  be sent though any modem),

       ·  the destination (phone number) of the job,

       ·  the time to send the job, or a blank field if the job is being  pro‐
	  cessed or is to be sent immediately,

       ·  the job's owner,

       ·  and  status  information  about  the job (typically the reason why a
	  previous attempt failed).

       The receive queue report lists the facsimile documents that  have  been
       received and are awaiting delivery; by default it includes:

       ·  the document protection mode,

       ·  the number of pages,

       ·  the document's owner,

       ·  the phone number of the sender (if supplied),

       ·  the date and time at which the job was received, and

       ·  the  filename	 of  the document in the recvq directory on the server
	  machine.

OPTIONS
       -a	 Display the contents of the archive directory on  the	server
		 machine

       -d	 Display  the  status  of  all	jobs that have completed; i.e.
		 those jobs located in	the  doneq  directory  on  the	server
		 machine.  The JobFmt string defines the content and format of
		 information reported with this option.

       -f	 Display the status of document	 files	located	 in  the  docq
		 directory  on the server machine.  The FileFmt string defines
		 the content and format	 of  information  reported  with  this
		 option (see below).

       -g	 Display  times	 and  dates in Greenwich Mean Time (GMT).  NB:
		 this is the default.

       -h host	 Report the status of the server on a specific host.  The host
		 may be either a symbolic name or a network address.  If no -h
		 option is supplied, faxstat uses  the	FAXSERVER  environment
		 variable  to identify the HylaFAX server to contact.  If this
		 variable is not set, then faxstat checks for a setting in the
		 configuration	files  (first in the per-user file and then in
		 the system-wide file).	 If all of the above fails, then faxs‐
		 tat  attempts	to contact a server on the machine where it is
		 run.

       -i	 Display additional status information for the server as given
		 by /var/spool/fax/status/any.info.  This status typically has
		 information such as the HylaFAX version, the  physical	 loca‐
		 tion of the server machine, and an administrative contact for
		 the server.  See status(5F).

       -l	 Display times and dates in the local timezone of the server.

       -n	 Supress the display of server and modem status.

       -o login	 Specify the fax owner login name.  If unspecified, the user's
		 current  login	 name is used.	The login password may also be
		 provided by separating it from the owner login	 name  with  a
		 colon, like ``owner:pass''.

       -q	 Display the sequence numbers of the HylaFAX queues.

       -r	 Display the receive queue status for each server.  The RcvFmt
		 string defines the content and format of information reported
		 with this option (see below).

       -s	 Display  the  status  of jobs in the send queue on the server
		 machine.  The JobFmt string defines the content and format of
		 information reported with this option (see below).

       -v	 Trace	the  protocol  exchanges between faxstat and the hfaxd
		 processes on the standard output.

CONFIGURATION PARAMETERS
       faxstat	  reads	   configuration    information	   from	   the	  file
       /usr/share/fax/hyla.conf	 and then from the file ~/.hylarc.  Configura‐
       tion files follow the conventions described in hylafax-client(1).   The
       following configuration parameters are recognized:
       Tag		Type	   Default	Description
       FileFmt		string	   see below	format string for file status results
       Host		string	   localhost	host to contact for service
       JobFmt		string	   see below	format string for job status results
       ModemFmt		string	   see below	format string for modem status results
       PassiveMode	boolean	   false	whether or not to use passive mode
       Port		integer	   4559		port to use in contacting server
       Protocol		string	   tcp		protocol to use in contacting server
       RcvFmt		string	   see below	format string for received facsimile status results
       TimeZone		string	   GMT		timezone to use for reporting dates and times
       Verbose		boolean	   No		whether or not to enable protocol tracing

       The configuration parameters are explained below:

       FileFmt	     The  format  string  to  use  when	 returning file status
		     information with the -f option.   Formats	are  specified
		     using  printf(3S)-style  conventions  but using the field
		     identifiers listed below.	Each item  can	include	 field
		     width,  precision,	 left-justification,  0-filling,  etc.
		     just as for printf; e.g. %-8p for	an  8-character	 wide,
		     left-justified,  blank-padded  field  containing the file
		     protection flags.

		     Format    Description
		     a	       Last access time
		     c	       Creation time
		     d	       Device number (octal)
		     f	       Filename
		     g	       Group identifier (decimal)
		     i	       Inode number (decimal)
		     l	       Link count (decimal)
		     m	       Last modification time
		     o	       Owner (based on file GID)
		     p	       Fax-style protection flags (no group bits)
		     q	       UNIX-style protection flags
		     r	       Root device number (octal)
		     s	       File size in bytes (decimal)
		     u	       User identifier (decimal)

       Host	     The host to contact for service.  (Equivalent to  the  -h
		     option.)

       JobFmt	     The format string to use when returning job status infor‐
		     mation for the -s and -d options.	Formats are  specified
		     using  printf(3S)-style  conventions  but using the field
		     identifiers listed below.	Each item  can	include	 field
		     width,  precision,	 left-justification,  0-filling,  etc.
		     just as for printf; e.g. %-3j  for	 a  3-character	 wide,
		     left-justified,  blank-padded  field  containing  the job
		     state.

		     Format    Description
		     A	       Destination SubAddress
		     B	       Destination Password
		     C	       Destination company name
		     D	       Total # dials/maximum # dials
		     E	       Desired signalling rate
		     F	       Client-specific tagline format string
		     G	       Desired min-scanline time
		     H	       Desired data format
		     I	       Client-specified scheduling priority
		     J	       Client-specified job tag string
		     K	       Desired use of ECM (one-character symbol)
		     L	       Destination geographic location
		     M	       Notification e-mail address
		     N	       Desired use of private tagline (one-character symbol)
		     O	       Whether to use continuation cover page (one-character symbol)
		     P	       # pages transmitted/total # pages to transmit
		     Q	       Client-specified minimum acceptable signalling rate
		     R	       Destination person (receiver)
		     S	       Sender's identity
		     T	       Total # tries/maximum # tries
		     U	       Page chopping threshold (inches)
		     V	       Job done operation
		     W	       Communication identifier
		     X	       Job type (one-character symbol)
		     Y	       Scheduled date and time
		     Z	       Scheduled time in seconds since the UNIX epoch
		     a	       Job state (one-character symbol)
		     b	       # consecutive failed tries
		     c	       Client machine name
		     d	       Total # dials
		     e	       Public (external) format of dialstring
		     f	       # consecutive failed dials
		     g	       Group identifier
		     h	       Page chop handling (one-character symbol)
		     i	       Current scheduling priority
		     j	       Job identifier
		     k	       Job kill time
		     l	       Page length in mm
		     m	       Assigned modem
		     n	       E-mail notification handling (one-character symbol)
		     o	       Job owner
		     p	       # pages transmitted
		     q	       Job retry time (MM::SS)
		     r	       Document resolution in lines/inch
		     s	       Job status information from last failure
		     t	       Total # tries attempted
		     u	       Maximum # tries
		     v	       Client-specified dialstring
		     w	       Page width in mm
		     x	       Maximum # dials
		     y	       Total # pages to transmit
		     z	       Time to send job

		     The K format produces: ``D'' if ECM is to be disabled, ``
		     ''	 (space)  if ECM use is enabled, ``H'' if T.30 Annex C
		     half duplex is enabled, or ``F'' if  T.30	Annex  C  full
		     duplex is enabled.

		     The  N  format produces: `` '' (space) if the system-wide
		     tagline format is to  be  used  or	 ``P''	if  a  private
		     tagline format is to be used.

		     The  O  format  produces:	``N'' if no continuation cover
		     page is to be used or `` '' (space) if the system default
		     handling for continuation cover pages is to be used.

		     The X format produces: ``F'' for a facsimile job or ``P''
		     for a pager job.

		     The a format produces: ``?'' for a job  in	 an  undefined
		     state,  ``T''  for a suspended job (not being scheduled),
		     ``P'' for a pending job (waiting for its time to send  to
		     arrive),  ``S''  for a sleeping job (waiting for a sched‐
		     uled timeout such as a delay between attempts  to	send),
		     ``B''  for	 a  job	 blocked by concurrent activity to the
		     same destination, ``W'' for a job waiting	for  resources
		     such  as  a  free modem, ``R'' for a job that is actively
		     running, and ``D'' for a job that is done and was a  suc‐
		     cess.  ``F'' for a job that failed to complete.

		     The  h  format  produces:	``D'' if page chopping is dis‐
		     abled, `` '' (space) for the  system  default  page  chop
		     handling,	``A''  when  all  pages	 are to be chopped, or
		     ``L'' if only the last page is to be chopped.

		     The n format produces: `` '' (space) when no notification
		     messages  are to be delivered, ``D'' when notification is
		     to be sent when the job is done, ``Q'' when  notification
		     is	 to  be	 sent  each time the job is requeued, or ``A''
		     when notification is to be sent for either the  job  com‐
		     pleting or being requeued.

		     It is recommended that all items include a field width so
		     that the width of column title strings can be constrained
		     when constructing headers from the format string.

       ModemFmt	     The  format  string  to  use  when returning modem status
		     information.      Formats	   are	   specified	 using
		     printf(3S)-style  conventions but using the field identi‐
		     fiers listed below.  Each item can include	 field	width,
		     precision,	 left-justification,  0-filling,  etc. just as
		     for printf; e.g. %-8h for an 8-character wide,  left-jus‐
		     tified,  blank-padded  field  containing  the name of the
		     host the server is running on.

		     Format    Description
		     h	       Server hostname
		     l	       Local identifier string
		     m	       Canonical modem name
		     n	       FAX phone number
		     r	       Maximum pages that can be received in a single call
		     s	       Status information string
		     t	       Server and session tracing levels (xxxxx:yyyyy)
		     v	       Modem speaker volume as one-character symbol
		     z	       A ``*'' if a faxgetty(8C) process is running; otherwise `` '' (space)

       PassiveMode
		 Whether or not to use passive mode in communication with  the
		 server.

       Port	     The  network port to contact for service.	(Equivalent to
		     the -h option.)

       Protocol	     The name of the communication protocol to use  when  con‐
		     tacting a server.	(Equivalent to the FAXSERVICE environ‐
		     ment variable.)

       RcvFmt	     The format string to use when returning  status  informa‐
		     tion  for	the  -r	 option.   Formats are specified using
		     printf(3S)-style conventions but using the field  identi‐
		     fiers  listed  below.  Each item can include field width,
		     precision, left-justification, 0-filling,	etc.  just  as
		     for printf; e.g. %-3b for a 3-character wide, left-justi‐
		     fied, blank-padded field containing the signalling rate.

		     Format    Description
		     Y	       Extended representation of the time when the receive happened
		     a	       SubAddress received from sender (if any)
		     b	       Signalling rate used during receive
		     d	       Data format used during receive
		     e	       Error description if an error occurred during receive
		     f	       Document filename (relative to the recvq directory)
		     h	       Time spent receiving document (HH:MM:SS)
		     i	       CIDName value for received fax
		     j	       CIDNumber value for received fax
		     l	       Page length in mm
		     m	       Fax-style protection mode string (``-rwxrwx'')
		     n	       File size (number of bytes)
		     o	       File owner
		     p	       Number of pages in document
		     q	       UNIX-style protection flags
		     r	       Resolution of received data
		     s	       Sender identity (TSI)
		     t	       Compact representation of the time when the receive happened
		     w	       Page width in mm
		     z	       A ``*'' if receive is going on; otherwise `` '' (space)

		     It is recommended that all items include a field width so
		     that the width of column title strings can be constrained
		     when constructing headers from the format string.

       TimeZone	     Control whether times and dates are reported in the local
		     timezone  of  the server (``local'') or in GMT (``gmt'').
		     By default times are reported in GMT.

       Verbose	     Control protocol tracing.	(Equivalent to the -v option.)

NOTES
       The server login user name may be specified by the FAXUSER  environment
       variable.

BUGS
       There  is no way to suppress the server status report.  There is no way
       to control the printing of headers.

FILES
       /usr/share/fax/hyla.conf	   system-wide configuration file
       ~/.hylarc		   per-user configuration file

SEE ALSO
       hylafax-client(1), sendfax(1), faxalter(1), faxrm(1), hfaxd(8C)

				 July 9, 1996			    FAXSTAT(1)
[top]

List of man pages available for Mandriva

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net