fence_rsb man page on RedHat

Man page or keyword search:  
man Server   29550 pages
apropos Keyword Search (all sections)
Output format
RedHat logo
[printable version]


FENCE_AGENT(8)							FENCE_AGENT(8)

NAME
       fence_rsb - I/O Fencing agent for Fujitsu-Siemens RSB

DESCRIPTION
       fence_rsb  is  an I/O Fencing agent which can be used with the Fujitsu-
       Siemens RSB management interface. It logs into  device  via  telnet/ssh
       and  reboots  a specified outlet. Lengthy telnet/ssh connections should
       be avoided while a GFS cluster is running because the  connection  will
       block any necessary fencing actions.

       fence_rsb  accepts  options  on the command line as well as from stdin.
       Fenced  sends  parameters  through  stdin  when	it  execs  the	agent.
       fence_rsb can be run by itself with command line options.  This is use‐
       ful for testing and for turning outlets on or off from scripts.

       Vendor URL: http://www.fujitsu.com

PARAMETERS

       -a, --ip=[ip]
	      IP Address or Hostname This parameter is always required.

       -l, --username=[name]
	      Login Name This parameter is always required.

       -p, --password=[password]
	      Login password or passphrase

       -x, --ssh
	      SSH connection

       -c, --command-prompt=[prompt]
	      Force Python regex  for  command	prompt	(Default  Value:  ['to
	      quit:'])

       -u, --ipport=[port]
	      TCP/UDP  port  to use for connection with device (Default Value:
	      3172)

       -4, --inet4-only
	      Forces agent to use IPv4 addresses only

       -6, --inet6-only
	      Forces agent to use IPv6 addresses only

       -S, --password-script=[script]
	      Script to retrieve password

       -k, --identity-file=[filename]
	      Identity file for ssh

       --ssh-options=[options]
	      SSH options to use

       -o, --action=[action]
	      Fencing Action (Default Value: reboot)

       -v, --verbose
	      Verbose mode

       -D, --debug-file=[debugfile]
	      Write debug information to given file

       -V, --version
	      Display version information and exit

       -h, --help
	      Display help and exit

       --power-timeout=[seconds]
	      Test X seconds for status change after  ON/OFF  (Default	Value:
	      20)

       --shell-timeout=[seconds]
	      Wait  X  seconds	for  cmd prompt after issuing command (Default
	      Value: 3)

       --login-timeout=[seconds]
	      Wait X seconds for cmd prompt after  login  (Default  Value:  5)

       --power-wait=[seconds]
	      Wait X seconds after issuing ON/OFF (Default Value: 0)

       --delay=[seconds]
	      Wait  X  seconds	before	fencing	 is started (Default Value: 0)

       --retry-on=[attempts]
	      Count of attempts to retry power on (Default Value: 1)

ACTIONS

       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List available plugs with aliases/virtual machines if  there  is
	      support for more then one device. Returns N/A otherwise.

       monitor
	      Check the health of fence device

       metadata
	      Display the XML metadata describing this resource.

STDIN PARAMETERS

       ipaddr IP Address or Hostname This parameter is always required.

       login  Login Name This parameter is always required.

       passwd Login password or passphrase

       secure SSH connection

       cmd_prompt
	      Force  Python  regex  for	 command  prompt  (Default Value: ['to
	      quit:'])

       ipport TCP/UDP port to use for connection with device  (Default	Value:
	      3172)

       inet4_only
	      Forces agent to use IPv4 addresses only

       inet6_only
	      Forces agent to use IPv6 addresses only

       passwd_script
	      Script to retrieve password

       identity_file
	      Identity file for ssh

       ssh_options
	      SSH options to use

       action Fencing Action (Default Value: reboot)

       verbose
	      Verbose mode

       debug  Write debug information to given file

       version
	      Display version information and exit

       help   Display help and exit

       power_timeout
	      Test  X  seconds	for status change after ON/OFF (Default Value:
	      20)

       shell_timeout
	      Wait X seconds for cmd prompt  after  issuing  command  (Default
	      Value: 3)

       login_timeout
	      Wait  X  seconds	for  cmd prompt after login (Default Value: 5)

       power_wait
	      Wait X seconds after issuing ON/OFF (Default Value: 0)

       delay  Wait X seconds before fencing  is	 started  (Default  Value:  0)

       retry_on
	      Count of attempts to retry power on (Default Value: 1)

fence_rsb (Fence Agent)		  2009-10-20			FENCE_AGENT(8)
[top]

List of man pages available for RedHat

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net