init man page on RedHat

Man page or keyword search:  
man Server   29550 pages
apropos Keyword Search (all sections)
Output format
RedHat logo
[printable version]

SYSTEMD(1)			    systemd			    SYSTEMD(1)

NAME
       systemd, init - systemd system and service manager

SYNOPSIS
       systemd [OPTIONS...]

       init [OPTIONS...] {COMMAND}

DESCRIPTION
       systemd is a system and service manager for Linux operating systems.
       When run as first process on boot (as PID 1), it acts as init system
       that brings up and maintains userspace services.

       For compatibility with SysV, if systemd is called as init and a PID
       that is not 1, it will execute telinit and pass all command line
       arguments unmodified. That means init and telinit are mostly equivalent
       when invoked from normal login sessions. See telinit(8) for more
       information.

       When run as system instance, systemd interprets the configuration file
       system.conf, otherwise user.conf. See systemd-system.conf(5) for more
       information.

OPTIONS
       The following options are understood:

       -h, --help
	   Prints a short help text and exits.

       --version
	   Prints a systemd version identifier and exits.

       --test
	   Determine startup sequence, dump it and exit. This is an option
	   useful for debugging only.

       --dump-configuration-items
	   Dump understood unit configuration items. This outputs a terse but
	   complete list of configuration items understood in unit definition
	   files.

       --introspect=
	   Extract D-Bus interface introspection data. This is mostly useful
	   at install time to generate data suitable for the D-Bus interfaces
	   repository. Optionally the interface name for the introspection
	   data may be specified. If omitted, the introspection data for all
	   interfaces is dumped.

       --unit=
	   Set default unit to activate on startup. If not specified, defaults
	   to default.target.

       --system, --user
	   For --system, tell systemd to run a system instance, even if the
	   process ID is not 1, i.e. systemd is not run as init process.
	   --user does the opposite, running a user instance even if the
	   process ID is 1. Normally it should not be necessary to pass these
	   options, as systemd automatically detects the mode it is started
	   in. These options are hence of little use except for debugging.
	   Note that it is not supported booting and maintaining a full system
	   with systemd running in --system mode, but PID not 1. In practice,
	   passing --system explicitly is only useful in conjunction with
	   --test.

       --dump-core
	   Dump core on crash. This switch has no effect when run as user
	   instance.

       --crash-shell
	   Run shell on crash. This switch has no effect when run as user
	   instance.

       --confirm-spawn
	   Ask for confirmation when spawning processes. This switch has no
	   effect when run as user instance.

       --show-status=
	   Show terse service status information while booting. This switch
	   has no effect when run as user instance. Takes a boolean argument
	   which may be omitted which is interpreted as true.

       --log-target=
	   Set log target. Argument must be one of console, journal, syslog,
	   kmsg, journal-or-kmsg, syslog-or-kmsg, null.

       --log-level=
	   Set log level. As argument this accepts a numerical log level or
	   the well-known syslog(3) symbolic names (lowercase): emerg, alert,
	   crit, err, warning, notice, info, debug.

       --log-color=
	   Highlight important log messages. Argument is a boolean value. If
	   the argument is omitted, it defaults to true.

       --log-location=
	   Include code location in log messages. This is mostly relevant for
	   debugging purposes. Argument is a boolean value. If the argument is
	   omitted it defaults to true.

       --default-standard-output=, --default-standard-error=
	   Sets the default output or error output for all services and
	   sockets, respectively. That is, controls the default for
	   StandardOutput= and StandardError= (see systemd.exec(5) for
	   details). Takes one of inherit, null, tty, journal,
	   journal+console, syslog, syslog+console, kmsg, kmsg+console. If the
	   argument is omitted --default-standard-output= defaults to journal
	   and --default-standard-error= to inherit.

CONCEPTS
       systemd provides a dependency system between various entities called
       "units" of 12 different types. Units encapsulate various objects that
       are relevant for system boot-up and maintenance. The majority of units
       are configured in unit configuration files, whose syntax and basic set
       of options is described in systemd.unit(5), however some are created
       automatically from other configuration, dynamically from system state
       or programmatically at runtime. Units may be "active" (meaning started,
       bound, plugged in, ..., depending on the unit type, see below), or
       "inactive" (meaning stopped, unbound, unplugged, ...), as well as in
       the process of being activated or deactivated, i.e. between the two
       states (these states are called "activating", "deactivating"). A
       special "failed" state is available as well, which is very similar to
       "inactive" and is entered when the service failed in some way (process
       returned error code on exit, or crashed, or an operation timed out). If
       this state is entered, the cause will be logged, for later reference.
       Note that the various unit types may have a number of additional
       substates, which are mapped to the five generalized unit states
       described here.

       The following unit types are available:

	1. Service units, which start and control daemons and the processes
	   they consist of. For details see systemd.service(5).

	2. Socket units, which encapsulate local IPC or network sockets in the
	   system, useful for socket-based activation. For details about
	   socket units see systemd.socket(5), for details on socket-based
	   activation and other forms of activation, see daemon(7).

	3. Target units are useful to group units, or provide well-known
	   synchronization points during boot-up, see systemd.target(5).

	4. Device units expose kernel devices in systemd and may be used to
	   implement device-based activation. For details see
	   systemd.device(5).

	5. Mount units control mount points in the file system, for details
	   see systemd.mount(5).

	6. Automount units provide automount capabilities, for on-demand
	   mounting of file systems as well as parallelized boot-up. See
	   systemd.automount(5).

	7. Snapshot units can be used to temporarily save the state of the set
	   of systemd units, which later may be restored by activating the
	   saved snapshot unit. For more information see systemd.snapshot(5).

	8. Timer units are useful for triggering activation of other units
	   based on timers. You may find details in systemd.timer(5).

	9. Swap units are very similar to mount units and encapsulate memory
	   swap partitions or files of the operating system. They are
	   described in systemd.swap(5).

       10. Path units may be used to activate other services when file system
	   objects change or are modified. See systemd.path(5).

       11. Slice units may be used to group units which manage system
	   processes (such as service and scope units) in a hierarchical tree
	   for resource management purposes. See systemd.slice(5).

       12. Scope units are similar to service units, but manage foreign
	   processes instead of starting them as well. See systemd.scope(5).

       Units are named as their configuration files. Some units have special
       semantics. A detailed list is available in systemd.special(7).

       systemd knows various kinds of dependencies, including positive and
       negative requirement dependencies (i.e.	Requires= and Conflicts=) as
       well as ordering dependencies (After= and Before=). NB: ordering and
       requirement dependencies are orthogonal. If only a requirement
       dependency exists between two units (e.g.  foo.service requires
       bar.service), but no ordering dependency (e.g.  foo.service after
       bar.service) and both are requested to start, they will be started in
       parallel. It is a common pattern that both requirement and ordering
       dependencies are placed between two units. Also note that the majority
       of dependencies are implicitly created and maintained by systemd. In
       most cases it should be unnecessary to declare additional dependencies
       manually, however it is possible to do this.

       Application programs and units (via dependencies) may request state
       changes of units. In systemd, these requests are encapsulated as 'jobs'
       and maintained in a job queue. Jobs may succeed or can fail, their
       execution is ordered based on the ordering dependencies of the units
       they have been scheduled for.

       On boot systemd activates the target unit default.target whose job is
       to activate on-boot services and other on-boot units by pulling them in
       via dependencies. Usually the unit name is just an alias (symlink) for
       either graphical.target (for fully-featured boots into the UI) or
       multi-user.target (for limited console-only boots for use in embedded
       or server environments, or similar; a subset of graphical.target).
       However, it is at the discretion of the administrator to configure it
       as an alias to any other target unit. See systemd.special(7) for
       details about these target units.

       Processes systemd spawns are placed in individual Linux control groups
       named after the unit which they belong to in the private systemd
       hierarchy. (see cgroups.txt[1] for more information about control
       groups, or short "cgroups"). systemd uses this to effectively keep
       track of processes. Control group information is maintained in the
       kernel, and is accessible via the file system hierarchy (beneath
       /sys/fs/cgroup/systemd/), or in tools such as ps(1) (ps xawf -eo
       pid,user,cgroup,args is particularly useful to list all processes and
       the systemd units they belong to.).

       systemd is compatible with the SysV init system to a large degree: SysV
       init scripts are supported and simply read as an alternative (though
       limited) configuration file format. The SysV /dev/initctl interface is
       provided, and compatibility implementations of the various SysV client
       tools are available. In addition to that, various established Unix
       functionality such as /etc/fstab or the utmp database are supported.

       systemd has a minimal transaction system: if a unit is requested to
       start up or shut down it will add it and all its dependencies to a
       temporary transaction. Then, it will verify if the transaction is
       consistent (i.e. whether the ordering of all units is cycle-free). If
       it is not, systemd will try to fix it up, and removes non-essential
       jobs from the transaction that might remove the loop. Also, systemd
       tries to suppress non-essential jobs in the transaction that would stop
       a running service. Finally it is checked whether the jobs of the
       transaction contradict jobs that have already been queued, and
       optionally the transaction is aborted then. If all worked out and the
       transaction is consistent and minimized in its impact it is merged with
       all already outstanding jobs and added to the run queue. Effectively
       this means that before executing a requested operation, systemd will
       verify that it makes sense, fixing it if possible, and only failing if
       it really cannot work.

       Systemd contains native implementations of various tasks that need to
       be executed as part of the boot process. For example, it sets the
       hostname or configures the loopback network device. It also sets up and
       mounts various API file systems, such as /sys or /proc.

       For more information about the concepts and ideas behind systemd please
       refer to the Original Design Document[2].

       Note that some but not all interfaces provided by systemd are covered
       by the Interface Stability Promise[3].

       Units may be generated dynamically at boot and system manager reload
       time, for example based on other configuration files or parameters
       passed on the kernel command line. For details see the Generators
       Specification[4].

       Systems which invoke systemd in a container or initrd environment
       should implement the Container Interface[5] or initrd Interface[6]
       specifications, respectively.

DIRECTORIES
       System unit directories
	   The systemd system manager reads unit configuration from various
	   directories. Packages that want to install unit files shall place
	   them in the directory returned by pkg-config systemd
	   --variable=systemdsystemunitdir. Other directories checked are
	   /usr/local/lib/systemd/system and /usr/lib/systemd/system. User
	   configuration always takes precedence.  pkg-config systemd
	   --variable=systemdsystemconfdir returns the path of the system
	   configuration directory. Packages should alter the content of these
	   directories only with the enable and disable commands of the
	   systemctl(1) tool. Full list of directories is provided in
	   systemd.unit(5).

       User unit directories
	   Similar rules apply for the user unit directories. However, here
	   the XDG Base Directory specification[7] is followed to find units.
	   Applications should place their unit files in the directory
	   returned by pkg-config systemd --variable=systemduserunitdir.
	   Global configuration is done in the directory reported by
	   pkg-config systemd --variable=systemduserconfdir. The enable and
	   disable commands of the systemctl(1) tool can handle both global
	   (i.e. for all users) and private (for one user) enabling/disabling
	   of units. Full list of directories is provided in systemd.unit(5).

       SysV init scripts directory
	   The location of the SysV init script directory varies between
	   distributions. If systemd cannot find a native unit file for a
	   requested service, it will look for a SysV init script of the same
	   name (with the .service suffix removed).

       SysV runlevel link farm directory
	   The location of the SysV runlevel link farm directory varies
	   between distributions. systemd will take the link farm into account
	   when figuring out whether a service shall be enabled. Note that a
	   service unit with a native unit configuration file cannot be
	   started by activating it in the SysV runlevel link farm.

SIGNALS
       SIGTERM
	   Upon receiving this signal the systemd system manager serializes
	   its state, reexecutes itself and deserializes the saved state
	   again. This is mostly equivalent to systemctl daemon-reexec.

	   systemd user managers will start the exit.target unit when this
	   signal is received. This is mostly equivalent to systemctl --user
	   start exit.target.

       SIGINT
	   Upon receiving this signal the systemd system manager will start
	   the ctrl-alt-del.target unit. This is mostly equivalent to
	   systemctl start ctl-alt-del.target.

	   systemd user managers treat this signal the same way as SIGTERM.

       SIGWINCH
	   When this signal is received the systemd system manager will start
	   the kbrequest.target unit. This is mostly equivalent to systemctl
	   start kbrequest.target.

	   This signal is ignored by systemd user managers.

       SIGPWR
	   When this signal is received the systemd manager will start the
	   sigpwr.target unit. This is mostly equivalent to systemctl start
	   sigpwr.target.

       SIGUSR1
	   When this signal is received the systemd manager will try to
	   reconnect to the D-Bus bus.

       SIGUSR2
	   When this signal is received the systemd manager will log its
	   complete state in human readable form. The data logged is the same
	   as printed by systemctl dump.

       SIGHUP
	   Reloads the complete daemon configuration. This is mostly
	   equivalent to systemctl daemon-reload.

       SIGRTMIN+0
	   Enters default mode, starts the default.target unit. This is mostly
	   equivalent to systemctl start default.target.

       SIGRTMIN+1
	   Enters rescue mode, starts the rescue.target unit. This is mostly
	   equivalent to systemctl isolate rescue.target.

       SIGRTMIN+2
	   Enters emergency mode, starts the emergency.service unit. This is
	   mostly equivalent to systemctl isolate emergency.service.

       SIGRTMIN+3
	   Halts the machine, starts the halt.target unit. This is mostly
	   equivalent to systemctl start halt.target.

       SIGRTMIN+4
	   Powers off the machine, starts the poweroff.target unit. This is
	   mostly equivalent to systemctl start poweroff.target.

       SIGRTMIN+5
	   Reboots the machine, starts the reboot.target unit. This is mostly
	   equivalent to systemctl start reboot.target.

       SIGRTMIN+6
	   Reboots the machine via kexec, starts the kexec.target unit. This
	   is mostly equivalent to systemctl start kexec.target.

       SIGRTMIN+13
	   Immediately halts the machine.

       SIGRTMIN+14
	   Immediately powers off the machine.

       SIGRTMIN+15
	   Immediately reboots the machine.

       SIGRTMIN+16
	   Immediately reboots the machine with kexec.

       SIGRTMIN+20
	   Enables display of status messages on the console, as controlled
	   via systemd.show_status=1 on the kernel command line.

       SIGRTMIN+21
	   Disables display of status messages on the console, as controlled
	   via systemd.show_status=0 on the kernel command line.

       SIGRTMIN+22, SIGRTMIN+23
	   Sets the log level to "debug" (or "info" on SIGRTMIN+23), as
	   controlled via systemd.log_level=debug (or systemd.log_level=info
	   on SIGRTMIN+23) on the kernel command line.

       SIGRTMIN+24
	   Immediately exits the manager (only available for --user
	   instances).

       SIGRTMIN+26, SIGRTMIN+27, SIGRTMIN+28, SIGRTMIN+29
	   Sets the log level to "journal-or-kmsg" (or "console" on
	   SIGRTMIN+27, "kmsg" on SIGRTMIN+28, or "syslog-or-kmsg" on
	   SIGRTMIN+29), as controlled via systemd.log_target=journal-or-kmsg
	   (or systemd.log_target=console on SIGRTMIN+27,
	   systemd.log_target=kmsg on SIGRTMIN+28, or
	   systemd.log_target=syslog-or-kmsg on SIGRTMIN+29) on the kernel
	   command line.

ENVIRONMENT
       $SYSTEMD_LOG_LEVEL
	   systemd reads the log level from this environment variable. This
	   can be overridden with --log-level=.

       $SYSTEMD_LOG_TARGET
	   systemd reads the log target from this environment variable. This
	   can be overridden with --log-target=.

       $SYSTEMD_LOG_COLOR
	   Controls whether systemd highlights important log messages. This
	   can be overridden with --log-color=.

       $SYSTEMD_LOG_LOCATION
	   Controls whether systemd prints the code location along with log
	   messages. This can be overridden with --log-location=.

       $XDG_CONFIG_HOME, $XDG_CONFIG_DIRS, $XDG_DATA_HOME, $XDG_DATA_DIRS
	   The systemd user manager uses these variables in accordance to the
	   XDG Base Directory specification[7] to find its configuration.

       $SYSTEMD_UNIT_PATH
	   Controls where systemd looks for unit files.

       $SYSTEMD_SYSVINIT_PATH
	   Controls where systemd looks for SysV init scripts.

       $SYSTEMD_SYSVRCND_PATH
	   Controls where systemd looks for SysV init script runlevel link
	   farms.

       $LISTEN_PID, $LISTEN_FDS
	   Set by systemd for supervised processes during socket-based
	   activation. See sd_listen_fds(3) for more information.

       $NOTIFY_SOCKET
	   Set by systemd for supervised processes for status and start-up
	   completion notification. See sd_notify(3) for more information.

KERNEL COMMAND LINE
       When run as system instance systemd parses a number of kernel command
       line arguments[8]:

       systemd.unit=, rd.systemd.unit=
	   Overrides the unit to activate on boot. Defaults to default.target.
	   This may be used to temporarily boot into a different boot unit,
	   for example rescue.target or emergency.service. See
	   systemd.special(7) for details about these units. The option
	   prefixed with "rd."	is honored only in the initial RAM disk
	   (initrd), while the one that is not prefixed only in the main
	   system.

       systemd.dump_core=
	   Takes a boolean argument. If true, systemd dumps core when it
	   crashes. Otherwise, no core dump is created. Defaults to true.

       systemd.crash_shell=
	   Takes a boolean argument. If true, systemd spawns a shell when it
	   crashes. Otherwise, no shell is spawned. Defaults to false, for
	   security reasons, as the shell is not protected by any password
	   authentication.

       systemd.crash_chvt=
	   Takes an integer argument. If positive systemd activates the
	   specified virtual terminal when it crashes. Defaults to -1.

       systemd.confirm_spawn=
	   Takes a boolean argument. If true, asks for confirmation when
	   spawning processes. Defaults to false.

       systemd.show_status=
	   Takes a boolean argument. If true, shows terse service status
	   updates on the console during bootup. Defaults to true, unless
	   quiet is passed as kernel command line option in which case it
	   defaults to false.

       systemd.log_target=, systemd.log_level=, systemd.log_color=,
       systemd.log_location=
	   Controls log output, with the same effect as the
	   $SYSTEMD_LOG_TARGET, $SYSTEMD_LOG_LEVEL, $SYSTEMD_LOG_COLOR,
	   $SYSTEMD_LOG_LOCATION environment variables described above.

       systemd.default_standard_output=, systemd.default_standard_error=
	   Controls default standard output and error output for services,
	   with the same effect as the --default-standard-output= and
	   --default-standard-error= command line arguments described above,
	   respectively.

       systemd.setenv=
	   Takes a string argument in the form VARIABLE=VALUE. May be used to
	   set default environment variables to add to forked child processes.
	   May be used more than once to set multiple variables.

       quiet
	   Turn off status output at boot, much like systemd.show_status=false
	   would. Note that this option is also read by the kernel itself and
	   disables kernel log output. Passing this option hence turns off the
	   usual output from both the system manager and the kernel.

       debug
	   Turn on debugging output. This is equivalent to
	   systemd.log_level=debug. Note that this option is also read by the
	   kernel itself and enables kernel debug output. Passing this option
	   hence turns on the debug output from both the system manager and
	   the kernel.

       -b, emergency
	   Boot into emergency mode. This is equivalent to
	   systemd.unit=emergency.target and provided for compatibility
	   reasons and to be easier to type.

       single, s, S, 1
	   Boot into rescue mode. This is equivalent to
	   systemd.unit=rescue.target and provided for compatibility reasons
	   and to be easier to type.

       2, 3, 4, 5
	   Boot into the specified legacy SysV runlevel. These are equivalent
	   to systemd.unit=runlevel2.target, systemd.unit=runlevel3.target,
	   systemd.unit=runlevel4.target, and systemd.unit=runlevel5.target,
	   respectively, and provided for compatibility reasons and to be
	   easier to type.

       locale.LANG=, locale.LANGUAGE=, locale.LC_CTYPE=, locale.LC_NUMERIC=,
       locale.LC_TIME=, locale.LC_COLLATE=, locale.LC_MONETARY=,
       locale.LC_MESSAGES=, locale.LC_PAPER=, locale.LC_NAME=,
       locale.LC_ADDRESS=, locale.LC_TELEPHONE=, locale.LC_MEASUREMENT=,
       locale.LC_IDENTIFICATION=
	   Set the system locale to use. This overrides the settings in
	   /etc/locale.conf. For more information see locale.conf(5) and
	   locale(7).

       For other kernel command line parameters understood by components of
       the core OS, please refer to kernel-command-line(7).

SOCKETS AND FIFOS
       /run/systemd/notify
	   Daemon status notification socket. This is an AF_UNIX datagram
	   socket and is used to implement the daemon notification logic as
	   implemented by sd_notify(3).

       /run/systemd/shutdownd
	   Used internally by the shutdown(8) tool to implement delayed
	   shutdowns. This is an AF_UNIX datagram socket.

       /run/systemd/private
	   Used internally as communication channel between systemctl(1) and
	   the systemd process. This is an AF_UNIX stream socket. This
	   interface is private to systemd and should not be used in external
	   projects.

       /dev/initctl
	   Limited compatibility support for the SysV client interface, as
	   implemented by the systemd-initctl.service unit. This is a named
	   pipe in the file system. This interface is obsolete and should not
	   be used in new applications.

SEE ALSO
       systemd-system.conf(5), locale.conf(5), systemctl(1), journalctl(1),
       systemd-notify(1), daemon(7), sd-daemon(3), systemd.unit(5),
       systemd.special(5), pkg-config(1), kernel-command-line(7), bootup(7),
       systemd.directives(7)

NOTES
	1. cgroups.txt
	   https://www.kernel.org/doc/Documentation/cgroups/cgroups.txt

	2. Original Design Document
	   http://0pointer.de/blog/projects/systemd.html

	3. Interface Stability Promise
	   http://www.freedesktop.org/wiki/Software/systemd/InterfaceStabilityPromise

	4. Generators Specification
	   http://www.freedesktop.org/wiki/Software/systemd/Generators

	5. Container Interface
	   http://www.freedesktop.org/wiki/Software/systemd/ContainerInterface

	6. initrd Interface
	   http://www.freedesktop.org/wiki/Software/systemd/InitrdInterface

	7. XDG Base Directory specification
	   http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html

	8. If run inside a Linux container these arguments may be passed as
	   command line arguments to systemd itself, next to any of the
	   command line options listed in the Options section above. If run
	   outside of Linux containers, these arguments are parsed from
	   /proc/cmdline instead.

systemd 207							    SYSTEMD(1)
[top]

List of man pages available for RedHat

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net