MPXIO(5)MPXIO(5)NAMEmpxio - multiplexed i/o
SYNOPSIS
#include <sys/mx.h>
#include <sgtty.h>
DESCRIPTION
Data transfers on mpx files (see mpx(2)) are multiplexed by imposing a
record structure on the io stream. Each record represents data
from/to a particular channel or a control or status message associated
with a particular channel.
The prototypical data record read from an mpx file is as follows
struct input_record {
short index;
short count;
short ccount;
char data[];
};
where index identifies the channel, and count specifies the number of
characters in data. If count is zero, ccount gives the size of data,
and the record is a control or status message. Although count or
ccount might be odd, the operating system aligns records on short (i.e.
16-bit) boundaries by skipping bytes when necessary.
Data written to an mpx file must be formatted as an array of record
structures defined as follows
struct output_record {
short index;
short count;
short ccount;
char *data;
};
where the data portion of the record is referred to indirectly and the
other cells have the same interpretation as in input_record.
The control messages listed below may be read from a multiplexed file
descriptor. They are presented as two 16-bit integers: the first num‐
ber is the message code (defined in <sys/mx.h>), the second is an
optional parameter meaningful only with M_WATCH and M_BLK.
M_WATCH - a process `wants to attach' on this channel. The second
parameter is the 16-bit user-id of the process that executed
the open.
M_CLOSE - the channel is closed. This message is generated when
the last file descriptor referencing a channel is closed.
The detach command (see mpx(2) should be used in response to
this message.
M_EOT - indicates logical end of file on a channel. If the chan‐
nel is joined to a typewriter, EOT (control-d) will cause the
M_EOT message under the conditions specified in tty(4) for
end of file. If the channel is attached to a process, M_EOT
will be generated whenever the process writes zero bytes on
the channel.
M_BLK - if non-blocking mode has been enabled on an mpx file
descriptor xd by executing ioctl(xd, MXNBLK, 0), write opera‐
tions on the file are truncated in the kernel when internal
queues become full. This is done on a per-channel basis: the
parameter is a count of the number of characters not trans‐
ferred to the channel on which M_BLK is received.
M_UBLK - is generated for a channel after M_BLK when the internal
queues have drained below a threshold.
Two other messages may be generated by the kernel. As with other mes‐
sages, the first 16-bit quantity is the message code.
M_OPEN - is generated in conjunction with `listener' mode (see
mpx(2)). The uid of the calling process follows the message
code as with M_WATCH. This is followed by a null-terminated
string which is the name of the file being opened.
M_IOCTL - is generated for a channel connected to a process when
that process executes the ioctl(fd, cmd, &vec) call on the
channel file descriptor. The M_IOCTL code is followed by the
cmd argument given to ioctl followed by the contents of the
structure vec. It is assumed, not needing a better compro‐
mise at this time, that the length of vec is determined by
sizeof (struct sgttyb) as declared in <sgtty.h>.
Two control messages are understood by the operating system. M_EOT may
be sent through an mpx file to a channel. It is equivalent to propa‐
gating a zero-length record through the channel; i.e. the channel is
allowed to drain and the process or device at the other end receives a
zero-length transfer before data starts flowing through the channel
again. M_IOCTL can also be sent through a channel. The format is
identical to that described above.
MPXIO(5)
