ne man page on Ultrix

Man page or keyword search:  
man Server   3690 pages
apropos Keyword Search (all sections)
Output format
Ultrix logo
[printable version]

ne(4)									 ne(4)

Name
       ne - Second Generation Ethernet Chip Interface

Syntax
       device ne0 at ibus? vector neintr

Description
       The interface provides access to a 10 Mb/s Ethernet network through the
       Digital's Second Generation Ethernet Chip (SGEC) based controller.

       The host's Internet address is specified at boot time with  an  SIOCSI‐
       FADDR  ioctl.   The  interface  employs the address resolution protocol
       described in to map dynamically between Internet and Ethernet addresses
       on the local network.

       The  driver  normally  tries to use a trailer encapsulation to minimize
       copying data on input and output.  This can be disabled for  an	inter‐
       face  by	 setting  the  IFF_NOTRAILERS flag with an SIOCSIFFLAGS ioctl.
       Trailers are only used for packets destined for Internet hosts.

       The SIOCSPHYSADDR ioctl can be used to change the physical  address  of
       the  adapter and the SIOCRPHYSADDR ioctl can be used to read its physi‐
       cal address.

       The SIOCADDMULTI and SIOCDELMULTI ioctls can be used to add  or	delete
       multicast   addresses.	The  recognizes	 a  maximum  of	 16  multicast
       addresses.

       The SIOCRDCTRS and SIOCRDZCTRS ioctls can be used to read or  read  and
       clear  the  Ethernet driver counters.  The argument to these two ioctls
       is a pointer to a counter structure, found in

       The SIOCENABLBACK and SIOCDISABLBACK ioctls can be used to  enable  and
       disable the interface loopback mode respectively.

Diagnostics
       The  diagnostic error messages contain relevant information provided by
       the driver. For example,

       ne%d: self test failed <reason lists>
       Adapter did not pass the power-up  self-test  during  autoconfiguration
       time.

       ne%d: write CSR0 failed
       The driver was unable to set the initial value for the adapter.

       ne%d: couldn't allocate ......
       The  driver  was unable to allocate memory for the internal data struc‐
       tures.  ne%d: can't handle af%d
       The interface was handed	 a  message  with  addresses  formated	in  an
       unsuitable address family, and the packet was dropped.

       ne%d: memory error (MERR)
       A host memory problem or a memory parity error has occurred.

       ne%d: SIOCADDMULTI fail, multicast list full
       Too many multicast requests have been made.

See Also
       arp(4p), inet(4f), intro(4n)

									 ne(4)
[top]

List of man pages available for Ultrix

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net