polarhome shell account creation

FreeBSD hardware description

Intel Pentium 400Mhz, 8G HD, 256M RAM.

Description more in detail:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #1: Tue Feb  4 01:57:16 CET 2003
    root@freebsd.polarhome.com:/usr/src/sys/i386/compile/POLARHOME_01
Preloaded elf kernel "/boot/kernel/kernel" at 0xc047c000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc047c0a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 400911043 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x665  Stepping = 5
  Features=0x183f9ff
real memory  = 67108864 (64 MB)
avail memory = 60289024 (57 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0:  $on motherboard
npx0: INT 16 interface
Using $PIR table, 6 entries at 0xc00fdd50
pcib0: at pcibus 0 on motherboard
pci0: on pcib0
agp0: mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: at device 1.0 on pci0
pci1: on pcib1
pci1: at device 0.0 (no driver attached)
isab0: at device 7.0 on pci0
isa0: on isab0
atapci0: port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: at device 7.2 (no driver attached)
pci0: at device 7.3 (no driver attached)
vr0: port 0xe400-0xe47f mem 0xe8000000-0xe800007f irq 12 at device 10.0 on p
ci0
vr0: Ethernet address: 00:50:ba:b2:1b:52
miibus0: on vr0
amphy0: on miibus0
amphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: at port 0x64,0x60 on isa0
fdc0: at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: on ppbus0
lpt0: Interrupt-driven port
ppi0: on ppbus0
sc0: at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: can't assign resources (port)
unknown: can't assign resources (port)
unknown: can't assign resources (port)
unknown: can't assign resources (port)
unknown: can't assign resources (port)
unknown: can't assign resources (port)
Timecounters tick every 10.000 msec
ad0: 8063MB [16383/16/63] at ata0-master UDMA33
acd0: CDROM at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
uhci0: port 0xe000-0xe01f irq 10 at device 7.2 on pci0
usb0: on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered$

Filesystem  1K-blocks    Used   Avail Capacity  Mounted on
/dev/ad0s1a     99183   68601   22648    75%    /
devfs               1       1       0   100%    /dev
/dev/ad0s1f   7745278 2169689 4955967    30%    /usr
/dev/ad0s1e     19815   10381    7849    57%    /var
procfs              4       4       0   100%    /proc

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ] [man]

Polarhome, production since 1999.
Member of Polarhome portal.

Vote for polarhome