NetBSD 2.0 (GENERIC) #0: Wed Dec 1 10:58:25 UTC 2004
builds@build:/big/builds/ab/netbsd-2-0-RELEASE/i386/200411300000Z-obj/bi
g/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 65148 KB
avail memory = 56036 KB
BIOS32 rev. 0 found at 0xfd814
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium/MMX (586-class), 166.41 MHz, id 0x543
cpu0: features 8001bf
cpu0: features 8001bf
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82437VX System Controller (TVX) (rev. 0x02)
pcib0 at pci0 dev 12 function 0
pcib0: Intel 82371SB PCI-to-ISA Bridge (PIIX3) (rev. 0x01)
piixide0 at pci0 dev 12 function 1
piixide0: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 12 function 2: Intel 82371SB USB Host Controller (PIIX3) (rev.
0x01)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
fxp0 at pci0 dev 14 function 0: Intel i82557 Ethernet, rev 2
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:00:4b:48:3a:ba
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 16 function 0: ATI Technologies Mach64 VTB (rev. 0x9a)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0:
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 2014 MB, 4092 cyl, 16 head, 63 sec, 512 bytes/sect x 4124736 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wd1 at atabus1 drive 0:
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 6149 MB, 13328 cyl, 15 head, 63 sec, 512 bytes/sect x 12594960 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd1(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
