CCE(4) BSD Programmer's Manual CCE(4)NAMEcce - Fujitsu MB86960 based Ethernet adapter
SYNOPSIS
cce0 at pcmcia?
DESCRIPTION
The cce interface is a MB86960 based PC Card device that provides access
to a 10 Mb/s Ethernet network. Some MB86960 based cards are:
Contec C-NET(PC)C
Fujitsu MBH10301, MBH10302 and MBH10304
Ratoc REX5535 (MBH10302 compatible, not confirmed)
Ratoc REX5588 (MBH10304 compatible)
Hitachi Lan Card HT-4840-10 (MBH10301 compatible)
Hitachi Lan Card HT-4840-11 (MBH10302 compatible)
Xircom Credit Card Ethernet Adapter (Original and Corporate Series)
NextCom NC5310
TDK LANX LAC-CD021
The standard PC Card configuration mechanism is used, at boot time the
driver initializes for the possibility of an cce card being inserted
(even if one has not been inserted at boot time). Then when the card is
inserted a free IRQ is assigned and the physical hardware is initialized.
Each of the host's network addresses are specified at boot time with an
SIOCSIFADDR ioctl. The cce interface employs the address resolution pro-
tocol described in arp(4) to dynamically map between Internet and Ether-
net addresses on the local network.
MEDIA SELECTION
On cards that support more than one media, selection is performed manual-
ly by switching cables.
SEE ALSOintro(4), inet(4), arp(4)HISTORY
The cce driver has been contributed to Berkeley Software Design, Inc. by
the Wildboar Project and its contributors.
BSDI BSD/OS January 4, 1996 1