MAKEPP_BUILD_CHECK(1) Makepp MAKEPP_BUILD_CHECK(1)NAMEmakepp_build_check-- How makepp decides to rebuild files
DESCRIPTION
A: "architecture_independent", E: "exact_match", I: "ignore_action",
O: "only_action", T: "target_newer"
Makepp stores a variety of information about how any given file was
built the last time. This information includes the build command, the
architecture, and the signatures of all the file's dependencies. (All
the stored information is in the subdirectory .makepp of each
directory.) If any of this information has changed, makepp usually
decides to rebuild the file. The build check method is what controls
makepp's decision to rebuild. It decides which information to look at,
and which to ignore.
Makepp usually picks the correct build check method automatically.
However, you can change the signature method for an individual rule by
using :build_check modifier on the rule, or for all rules in a makefile
by using the build_check statement, or for all makefiles at once using
the -m or --build-check-method command line option.
The data used to decide about a rebuild or a repository or build cache
import is stored in the internal build info file. You can display it
with makeppinfo, mppi. Below each method gives an example of how to
see its keys.
Build check methods included in the distribution
At present, there are five build check methods included in the
distribution:
exact_match
This method uses the modification dates on the file as signatures.
It rebuilds the targets unless all of the following conditions are
true:
· The signature of each dependency is the same as it was on the
last build.
· The signature of each target is the same as it was on the last
build (i.e., no one has messed with the targets since makepp
built them).
· The build command has not changed.
· The machine architecture (or what Perl thinks it is) has not
changed.
"exact_match" is the default method unless you are rebuilding a
Makefile (see below). This is a highly reliable way of ensuring
correct builds, and is almost always what you want. However, it
does have a few side effects that may be surprising:
· If you've been compiling with the traditional make, and then
switch to makepp, everything is recompiled the first time you
run makepp.
· If you damage makepp's information about what happened on the
last build (e.g., you delete the subdirectory ".makepp", or
don't copy it when you copy everything else), then a rebuild is
triggered.
· If you replace a file with an older version, a rebuild is
triggered. This is normally what you want, but it might be
surprising.
· If you modify a file outside of the control of makepp (e.g.,
you run the compilation command yourself), then makepp will
rebuild the file next time. (If you want to avoid this, check
out the "--dont-build" command line option.)
· Architecture-independent files are rebuilt when you switch to a
different architecture. This is usually not a problem, because
they often don't take long to build. The reason why all files
are tagged with the architecture, instead of just binary files,
is that often times even ASCII files are architecture-
dependent. For example, output from the Solaris "lex" program
won't compile on Linux (or at least this used to be true the
last time I tried it).
Concretely, a file will not be rebuilt, or can be fetched from
repository or build cache, if the following command output stays
the same, i.e. matches the signatures of the dependencies:
mppi -k'COMMAND ARCH SORTED_DEPS DEP_SIGS ENV_{DEP,VAL}S' file
architecture_independent
The "architecture_independent" method is the same as "exact_match"
except that it does not check the architecture. This can be useful
for architecture-independent files, that don't need to be rebuilt
when you switch to a different architecture. For example, you
probably don't need to rerun "bison" on Solaris if you already ran
it on Linux.
The "architecture_independent" method is best used by specifying it
using the ":build_check architecture_independent" modifier to the
each rule that produces architecture independent files. Makepp by
default never assumes any files are architecture independent,
because even .c files can be architecture dependent. For example,
the output of Solaris lex will not compile under Linux, or at least
it wouldn't last time I tried. So you must manually specify this
build check method for any files which are truly architecture-
independent.
Concretely, a file will not be rebuilt, or can be fetched from
repository or build cache, if the following command output stays
the same, i.e. matches the signatures of the dependencies:
mppi -k'COMMAND SORTED_DEPS DEP_SIGS ENV_{DEP,VAL}S' file
ignore_action
The "ignore_action" method is the same as "exact_match" except that
it does not check the action string (the command). Sometimes a
command can change and you don't want to force a rebuild.
For example, you might want to explicitly put a date into your
command to log when the build was done, but you don't want to force
a rebuild every time the command is executed. For example,
BUILD_DATE := $(shell date)
my_program : $(MODULES).o
$(CXX) $(inputs) -DBUILD_DATE="\"$(BUILD_DATE)\"" date_stamp.c -o $(output)
This will compile date_stamp.c with the last build date stamp, but
won't force a recompile when the date changes. Unfortunately, if
something else about the link command changes (e.g., you change
linker options), it also won't trigger a rebuild.
This is also useful in conjunction with the $(changed_inputs) or $?
variable for actions that merely update a target, rather than
rebuilding it from scratch. For example, you could update a .a
file like this:
libmine.a : *.o : build_check ignore_action
$(AR) ru $(output) $(changed_inputs)
This will still mostly work if you forget to specify the ":
build_check ignore_action". However, suppose that none of the .o
files have changed. The command will now be "ar ru libmine.a"
which is probably different from what it was last time (e.g.,
"ar ru libmine.a buggy_module.o"), so makepp will run the command.
In this case, the command won't do anything except waste time.
Building .a files like this is discouraged, because it can leave
stale .o files inside the archive. If you delete a source file,
the .o file is still inside the .a file, and this can lead to
incorrect builds. It's better to build a .a file like this:
libmine.a : *.o
&rm $(output)
$(AR) ru $(output) $(inputs)
Concretely, a file will not be rebuilt, or can be fetched from
repository or build cache, if the following command output stays
the same, i.e. matches the signatures of the dependencies:
mppi -k'ARCH SORTED_DEPS DEP_SIGS ENV_{DEP,VAL}S' file
target_newer
The "target_newer" method looks only at the file date. If any
dependency is more recent than the target, the target is rebuilt.
This is the algorithm that the traditional Unix make utility uses.
The "target_newer" method isn't as safe as the "exact_match" method
because it won't trigger a rebuild if you change the build command,
or if you replace a file with an older version. Sometimes also it
can get confused if clocks are not properly synchronized. For
example, if a file somehow gets a date of June 4, 2048, then
between now and 2048, every file that depends on that file will be
rebuilt even though the file doesn't change. Also switching to a
different architecture won't trigger a rebuild. It prevents
fetching a rule's target from a build cache, because there is no
unique signature that can be associated to the endless set of pairs
fulfilling the relationship newer than.
But there are a few cases where you may want to use the
"target_newer" method:
· When it is reasonable for a user to build a file outside of the
control of makepp. Perhaps the most common example are the
commands that generate the makefile itself, i.e., the
autoconfigure procedure. Users commonly issue the configure
command manually, but makefiles often have a way to update
themselves automatically. In this case, we don't want to force
the makefile to rebuild itself if the user typed the command in
manually, so the "target_newer" method is more appropriate than
the "exact_match" method. In fact, if makepp is trying to
build a makefile, it makes "target_newer" the default method
until it has finished building the makefile.
· When it is reasonable for a user to modify a file after makepp
has built it. For example, if a file does not exist, you may
want to copy it from a central location, or check it out from a
repository; but the user should be allowed to modify it. If
you use the default "exact_match" build check method, makepp
will detect that the user has changed the file and so it will
force a fresh copy from the central location or a fresh
checkout, wiping out the user's changes.
If you need to manually check the timestamps, see makeppinfo
examples for how to get the path of each dependency.
only_action
The very specific "only_action" method will only execute the action
if the command string differs from the last time it was executed.
For example,
$(ROOT)/include/%.h : %.h
&ln -fr $(input) $(output)
publishes a file, but does not repeat this when the file changes.
Note that the &ln command is builtin and thus cheap, but makepp
still has to fork off and monitor a process to perform the whole
action. So if you have lots of files to publish, there is still a
benefit. Actually we did not specify the method, because, when the
target is a symbolic link, this build check gets used
automatically. You only need to specify it for other commands that
depend solely on the command (which usually contains the names of
the inputs):
%.list : %.x : build_check only_action
&echo $(inputs) -o $(output)
Concretely, a file will not be rebuilt, or can be fetched from
repository or build cache, if the following command output stays
the same, i.e. matches the signatures of the dependencies:
mppi -kCOMMAND file
Other build check methods are possible. You can write your own build
check method by creating a module "Mpp::BuildCheck::MyMethod". Read
the documentation in Mpp/BuildCheck.pm in the makepp distribution. Most
likely, you will want your build check method to inherit from
"Mpp::BuildCheck::exact_match", so read its documentation too.
It's more commonly useful modify the signature mechanism than to modify
the build check mechanism directly. Before you change the build check
mechanism, see if your problem is better served by changing signatures
(see makepp_signatures for details).
Here are some reasons why a custom build check method might be useful:
· If you want makepp to ignore part of the command. For example, if
you have commands in your makefile like this:
x.o : x.c
ssh $(REMOTE_MACHINE) cc $< -o $@
you might want makepp not to force a rebuild if "$(REMOTE_MACHINE)"
changes. You could modify the "exact_match" method so it knows
about ssh commands and ignores the machine name. Check :dispatch
for another way to achieve that.
perl v5.20.3 2012-02-07 MAKEPP_BUILD_CHECK(1)