Ppmtomitsu User Manual(0) Ppmtomitsu User Manual(0)NAMEppmtomitsu - convert a PPM image to a Mitsubishi S340-10 file
SYNOPSISppmtomitsu
[-sharpness val]
[-enlarge val]
[-media string]
[-copy val]
[-dpi300]
[-tiny]
[ppmfile]
DESCRIPTION
This program is part of Netpbm(1).
ppmtomitsu reads a PPM image as input and converts it into a format
suitable to be printed by a Mitsubishi S340-10 printer, or any other
Mitsubishi color sublimation printer.
The Mitsubishi S340-10 Color Sublimation printer supports 24bit color.
Images of the available sizes take so long to transfer that there is a
fast method, employing a lookuptable, that ppmtomitsu will use if there
is a maximum of 256 colors in the image. ppmtomitsu will try to posi‐
tion your image to the center of the paper, and will rotate your image
for you if xsize is larger than ysize. If your image is larger than
the media allows, ppmtomitsu will quit with an error message. (We
decided that the media were too expensive to have careless users pro‐
duce misprints.) Once data transmission has started, the job can't be
stopped in a sane way without resetting the printer. The printer
understands putting together images in the printers memory; ppmtomitsu
doesn't utilize this as pnmcat etc provide the same functionality and
let you view the result on-screen, too. The S340-10 is the lowest com‐
mon denominator printer; for higher resolution printers there's the
dpi300 option. The other printers also support higher values for
enlarge eg, but I don't think that's essential enough to warrant a
change in the program.
For proper results, the input maxval must be 255. Use pamdepth to
ensure that it is.
Before Netpbm 10.40 (September 2007), all Netpbm PPM programs, includ‐
ing ppmtomitsu, see a PBM image as having maxval 1, so ppmtomitsu does
not function properly with PBM input. You can use ppmtoppm together
with pamdepth to turn your PBM input into maxval 255 PPM input that
ppmtomitsu will use properly.
OPTIONS-sharpness 1-4
'sharpness' designation. Default is to use the current sharp‐
ness.
-enlarge 1-3
Enlarge by a factor; Default is 1 (no enlarge)
-media {A|A4|AS|A4S}
Designate the media you're using. Default is 1184 x 1350, which
will fit on any media. A is 1216 x 1350, A4 is 1184 x 1452, AS
is 1216 x 1650 and A4S is 1184 x 1754. A warning: If you spec‐
ify a different media than the printer currently has, the
printer will wait until you put in the correct media or switch
it off.
-copy 1-9
The number of copies to produce. Default is 1.
-dpi300
Double the number of allowed pixels for a S3600-30 Printer in
S340-10 compatibility mode. (The S3600-30 has 300 dpi).
-tiny Memory-saving, but always slow. The printer will get the data
line-by-line in 24bit. It's probably a good idea to use this if
your machine starts paging a lot without this option.
REFERENCES
Mitsubishi Sublimation Full Color Printer S340-10 Specifications of
Parallel Interface LSP-F0232F
SEE ALSOpnmquant(1), pamscale(1), ppm(1)AUTHOR
Copyright (C) 1992, 93 by S.Petra Zeidler, MPIfR Bonn, Germany.
(spz@specklec.mpifr-bonn.mpg.de)
netpbm documentation 24 March 2009 Ppmtomitsu User Manual(0)