EVENT(3) BSD Programmer's Manual EVENT(3)NAME
event_init, event_dispatch, event_loop, event_loopexit, event_set,
event_base_dispatch, event_base_loop, event_base_loopexit,
event_base_set, event_base_free, event_add, event_del, event_once,
event_pending, event_initialized, event_priority_init,
event_priority_set, evtimer_set, evtimer_add, evtimer_del,
evtimer_pending, evtimer_initialized, signal_set, signal_add, signal_del,
signal_pending, signal_initialized, bufferevent_new, bufferevent_free,
bufferevent_write, bufferevent_write_buffer, bufferevent_read,
bufferevent_enable, bufferevent_disable, bufferevent_settimeout,
bufferevent_base_set, evbuffer_new, evbuffer_free, evbuffer_add,
evbuffer_add_buffer, evbuffer_add_printf, evbuffer_add_vprintf,
evbuffer_drain, evbuffer_write, evbuffer_read, evbuffer_find,
evbuffer_readline, - execute a function when a specific event occurs
SYNOPSIS
#include <sys/time.h>
#include <event.h>
struct event_base *
event_init(void);
int
event_dispatch(void);
int
event_loop(int flags);
int
event_loopexit(struct timeval *tv);
void
event_set(struct event *ev, int fd, short event,
void (*fn)(int, short, void *), void *arg);
int
event_base_dispatch(struct event_base *base);
int
event_base_loop(struct event_base *base, int flags);
int
event_base_loopexit(struct event_base *base, struct timeval *tv);
int
event_base_set(struct event_base *base, struct event *);
void
event_base_free(struct event_base *base);
int
event_add(struct event *ev, struct timeval *tv);
int
event_del(struct event *ev);
int
event_once(int fd, short event, void (*fn)(int, short, void *),
void *arg, struct timeval *tv);
int
event_pending(struct event *ev, short event, struct timeval *tv);
int
event_initialized(struct event *ev);
int
event_priority_init(int npriorities);
int
event_priority_set(struct event *ev, int priority);
void
evtimer_set(struct event *ev, void (*fn)(int, short, void *), void *arg);
void
evtimer_add(struct event *ev, struct timeval *);
void
evtimer_del(struct event *ev);
int
evtimer_pending(struct event *ev, struct timeval *tv);
int
evtimer_initialized(struct event *ev);
void
signal_set(struct event *ev, int signal, void (*fn)(int, short, void *),
void *arg);
void
signal_add(struct event *ev, struct timeval *);
void
signal_del(struct event *ev);
int
signal_pending(struct event *ev, struct timeval *tv);
int
signal_initialized(struct event *ev);
struct bufferevent *
bufferevent_new(int fd, evbuffercb readcb, evbuffercb writecb, everrorcb,
void *cbarg);
void
bufferevent_free(struct bufferevent *bufev);
int
bufferevent_write(struct bufferevent *bufev, void *data, size_t size);
int
bufferevent_write_buffer(struct bufferevent *bufev,
struct evbuffer *buf);
size_t
bufferevent_read(struct bufferevent *bufev, void *data, size_t size);
int
bufferevent_enable(struct bufferevent *bufev, short event);
int
bufferevent_disable(struct bufferevent *bufev, short event);
void
bufferevent_settimeout(struct bufferevent *bufev, int timeout_read,
int timeout_write);
int
bufferevent_base_set(struct event_base *base, struct bufferevent *bufev);
struct evbuffer *
evbuffer_new(void);
void
evbuffer_free(struct evbuffer *buf);
int
evbuffer_add(struct evbuffer *buf, const void *data, size_t size);
int
evbuffer_add_buffer(struct evbuffer *dst, struct evbuffer *src);
int
evbuffer_add_printf(struct evbuffer *buf, const char *fmt, ...);
int
evbuffer_add_vprintf(struct evbuffer *buf, const char *fmt, va_list ap);
void
evbuffer_drain(struct evbuffer *buf, size_t size);
int
evbuffer_write(struct evbuffer *buf, int fd);
int
evbuffer_read(struct evbuffer *buf, int fd, int size);
u_char *
evbuffer_find(struct evbuffer *buf, const u_char *data, size_t size);
char *
evbuffer_readline(struct evbuffer *buf);
int (*event_sigcb)(void);
volatile sig_atomic_t event_gotsig;
DESCRIPTION
The event API provides a mechanism to execute a function when a specific
event on a file descriptor occurs or after a given time has passed.
The event API needs to be initialized with event_init() before it can be
used.
In order to process events, an application needs to call
event_dispatch(). This function only returns on error, and should replace
the event core of the application program.
In order to avoid races in signal handlers, the event API provides two
variables: event_sigcb and event_gotsig. A signal handler sets
event_gotsig to indicate that a signal has been received. The application
sets event_sigcb to a callback function. After the signal handler sets
event_gotsig, event_dispatch will execute the callback function to pro-
cess received signals. The callback returns 1 when no events are re-
gistered any more. It can return -1 to indicate an error to the event li-
brary, causing event_dispatch() to terminate with errno set to EINTR.
The event_loop function provides an interface for single pass execution
of pending events. The flags EVLOOP_ONCE and EVLOOP_NONBLOCK are recog-
nized. The event_loopexit function allows the loop to be terminated after
some amount of time has passed. The parameter indicates the time after
which the loop should terminate.
It is the responsibility of the caller to provide these functions with
pre-allocated event structures.
The function event_set() prepares the event structure ev to be used in
future calls to event_add() and event_del(). The event will be prepared
to call the function specified by the fn argument with an int argument
indicating the file descriptor, a short argument indicating the type of
event, and a void * argument given in the arg argument. The fd indicates
the file descriptor that should be monitored for events. The events can
be either EV_READ, EV_WRITE, or both, indicating that an application can
read or write from the file descriptor respectively without blocking.
The function fn will be called with the file descriptor that triggered
the event and the type of event which will be either EV_TIMEOUT,
EV_SIGNAL, EV_READ, or EV_WRITE. The additional flag EV_PERSIST makes an
event_add() persistent until event_del() has been called.
Once initialized, the ev structure can be used repeatedly with
event_add() and event_del() and does not need to be reinitialized unless
the function called and/or the argument to it are to be changed. However,
when an ev structure has been added to libevent using event_add() the
structure must persist until the event occurs (assuming EV_PERSIST is not
set) or is removed using event_del(). You may not reuse the same ev
structure for multiple monitored descriptors; each descriptor needs its
own ev.
The function event_add() schedules the execution of the ev event when the
event specified in event_set() occurs or in at least the time specified
in the tv. If tv is NULL, no timeout occurs and the function will only be
called if a matching event occurs on the file descriptor. The event in
the ev argument must be already initialized by event_set() and may not be
used in calls to event_set() until it has timed out or been removed with
event_del(). If the event in the ev argument already has a scheduled
timeout, the old timeout will be replaced by the new one.
The function event_del() will cancel the event in the argument ev. If the
event has already executed or has never been added the call will have no
effect.
The function event_once() is similar to event_set(). However, it
schedules a callback to be called exactly once and does not require the
caller to prepare an event structure. This function supports EV_TIMEOUT,
EV_READ, and EV_WRITE.
The event_pending() function can be used to check if the event specified
by event is pending to run. If EV_TIMEOUT was specified and tv is not
NULL, the expiration time of the event will be returned in tv.
The event_initialized() macro can be used to check if an event has been
initialized.
The functions evtimer_set(), evtimer_add(), evtimer_del(),
evtimer_initialized(), and evtimer_pending() are abbreviations for common
situations where only a timeout is required. The file descriptor passed
will be -1, and the event type will be EV_TIMEOUT.
The functions signal_set(), signal_add(), signal_del(),
signal_initialized(), and signal_pending() are abbreviations. The event
type will be a persistent EV_SIGNAL. That means signal_set() adds
EV_PERSIST.
It is possible to disable support for kqueue, poll, or select by setting
the environment variables EVENT_NOKQUEUE, EVENT_NOPOLL, or
EVENT_NOSELECT, respectively. By setting the environment variable
EVENT_SHOW_METHOD, libevent displays the kernel notification method that
it uses.
EVENT PRIORITIES
By default libevent schedules all active events with the same priority.
However, sometimes it is desirable to process some events with a higher
priority than others. For that reason, libevent supports strict priority
queues. Active events with a lower priority are always processed before
events with a higher priority.
The number of different priorities can be set initially with the
event_priority_init() function. This function should be called before the
first call to event_dispatch(). The event_priority_set() function can be
used to assign a priority to an event. By default, libevent assigns the
middle priority to all events unless their priority is explicitly set.
THREAD SAFE EVENTS
Libevent has experimental support for thread-safe events. When initializ-
ing the library via event_init(), an event base is returned. This event
base can be used in conjunction with calls to event_base_set(),
event_base_dispatch(), event_base_loop(), event_base_loopexit(),
bufferevent_base_set() and event_base_free(). event_base_set() should be
called after preparing an event with event_set(), as event_set() assigns
the provided event to the most recently created event base.
bufferevent_base_set() should be called after preparing a bufferevent
with bufferevent_new(). event_base_free() should be used to free memory
associated with the event base when it is no longer needed.
BUFFERED EVENTS
libevent provides an abstraction on top of the regular event callbacks.
This abstraction is called a buffered event. A buffered event provides
input and output buffers that get filled and drained automatically. The
user of a buffered event no longer deals directly with the IO, but in-
stead is reading from input and writing to output buffers.
A new bufferevent is created by bufferevent_new(). The parameter fd
specifies the file descriptor from which data is read and written to.
This file descriptor is not allowed to be a pipe(2). The next three
parameters are callbacks. The read and write callback have the following
form: void (*cb)(struct bufferevent *bufev, void *arg). The error call-
back has the following form: void (*cb)(struct bufferevent *bufev, short
what, void *arg). The argument is specified by the fourth parameter
cbarg. A bufferevent struct pointer is returned on success, NULL on er-
ror. Both the read and the write callback may be NULL. The error callback
has to be always provided.
Once initialized, the bufferevent structure can be used repeatedly with
bufferevent_enable() and bufferevent_disable(). The flags parameter can
be a combination of EV_READ and EV_WRITE. When read enabled the buf-
ferevent will try to read from the file descriptor and call the read
callback. The write callback is executed whenever the output buffer is
drained below the write low watermark, which is 0 by default.
The bufferevent_write() function can be used to write data to the file
descriptor. The data is appended to the output buffer and written to the
descriptor automatically as it becomes available for writing.
bufferevent_write() returns 0 on success or -1 on failure. The
bufferevent_read() function is used to read data from the input buffer,
returning the amount of data read.
If multiple bases are in use, bufferevent_base_set() must be called be-
fore enabling the bufferevent for the first time.
This section does not document all the possible function calls; please
check event.h for the public interfaces.
RETURN VALUES
Upon successful completion event_add() and event_del() return 0. Other-
wise, -1 is returned and the global variable errno is set to indicate the
error.
SEE ALSOkqueue(2), poll(2), select(2), evdns(3), timeout(9)HISTORY
The event API manpage is based on the timeout(9) manpage by Artur Gra-
bowski. Support for real-time signals is due to Taral.
AUTHORS
The event library was written by Niels Provos.
BUGS
This documentation is neither complete nor authoritative. If you are in
doubt about the usage of this API then check the source code to find out
how it works, write up the missing piece of documentation and send it to
me for inclusion in this man page.
MirOS BSD #10-current August 8, 2000 5
