glProgramUniformMatrix4fv man page on RedHat
[printable version]
GLPROGRAMUNIFORM(3G) OpenGL Manual GLPROGRAMUNIFORM(3G)
NAME
glProgramUniform1f, glProgramUniform2f, glProgramUniform3f,
glProgramUniform4f, glProgramUniform1i, glProgramUniform2i,
glProgramUniform3i, glProgramUniform4i, glProgramUniform1ui,
glProgramUniform2ui, glProgramUniform3ui, glProgramUniform4ui,
glProgramUniform1fv, glProgramUniform2fv, glProgramUniform3fv,
glProgramUniform4fv, glProgramUniform1iv, glProgramUniform2iv,
glProgramUniform3iv, glProgramUniform4iv, glProgramUniform1uiv,
glProgramUniform2uiv, glProgramUniform3uiv, glProgramUniform4uiv,
glProgramUniformMatrix2fv, glProgramUniformMatrix3fv,
glProgramUniformMatrix4fv, glProgramUniformMatrix2x3fv,
glProgramUniformMatrix3x2fv, glProgramUniformMatrix2x4fv,
glProgramUniformMatrix4x2fv, glProgramUniformMatrix3x4fv,
glProgramUniformMatrix4x3fv - Specify the value of a uniform variable
for a specified program object
C SPECIFICATION
void glProgramUniform1f(GLuint program, GLint location, GLfloat v0);
void glProgramUniform2f(GLuint program, GLint location, GLfloat v0,
GLfloat v1);
void glProgramUniform3f(GLuint program, GLint location, GLfloat v0,
GLfloat v1, GLfloat v2);
void glProgramUniform4f(GLuint program, GLint location, GLfloat v0,
GLfloat v1, GLfloat v2, GLfloat v3);
void glProgramUniform1i(GLuint program, GLint location, GLint v0);
void glProgramUniform2i(GLuint program, GLint location, GLint v0,
GLint v1);
void glProgramUniform3i(GLuint program, GLint location, GLint v0,
GLint v1, GLint v2);
void glProgramUniform4i(GLuint program, GLint location, GLint v0,
GLint v1, GLint v2, GLint v3);
void glProgramUniform1ui(GLuint program, GLint location, GLuint v0);
void glProgramUniform2ui(GLuint program, GLint location, GLint v0,
GLuint v1);
void glProgramUniform3ui(GLuint program, GLint location, GLint v0,
GLint v1, GLuint v2);
void glProgramUniform4ui(GLuint program, GLint location, GLint v0,
GLint v1, GLint v2, GLuint v3);
PARAMETERS
program
Specifies the handle of the program containing the uniform variable
to be modified.
location
Specifies the location of the uniform variable to be modified.
v0, v1, v2, v3
Specifies the new values to be used for the specified uniform
variable.
C SPECIFICATION
void glProgramUniform1fv(GLuint program, GLint location, GLsizei count,
const GLfloat *value);
void glProgramUniform2fv(GLuint program, GLint location, GLsizei count,
const GLfloat *value);
void glProgramUniform3fv(GLuint program, GLint location, GLsizei count,
const GLfloat *value);
void glProgramUniform4fv(GLuint program, GLint location, GLsizei count,
const GLfloat *value);
void glProgramUniform1iv(GLuint program, GLint location, GLsizei count,
const GLint *value);
void glProgramUniform2iv(GLuint program, GLint location, GLsizei count,
const GLint *value);
void glProgramUniform3iv(GLuint program, GLint location, GLsizei count,
const GLint *value);
void glProgramUniform4iv(GLuint program, GLint location, GLsizei count,
const GLint *value);
void glProgramUniform1uiv(GLuint program, GLint location,
GLsizei count, const GLuint *value);
void glProgramUniform2uiv(GLuint program, GLint location,
GLsizei count, const GLuint *value);
void glProgramUniform3uiv(GLuint program, GLint location,
GLsizei count, const GLuint *value);
void glProgramUniform4uiv(GLuint program, GLint location,
GLsizei count, const GLuint *value);
PARAMETERS
program
Specifies the handle of the program containing the uniform variable
to be modified.
location
Specifies the location of the uniform value to be modified.
count
Specifies the number of elements that are to be modified. This
should be 1 if the targeted uniform variable is not an array, and 1
or more if it is an array.
value
Specifies a pointer to an array of count values that will be used
to update the specified uniform variable.
C SPECIFICATION
void glProgramUniformMatrix2fv(GLuint program, GLint location,
GLsizei count, GLboolean transpose,
const GLfloat *value);
void glProgramUniformMatrix3fv(GLuint program, GLint location,
GLsizei count, GLboolean transpose,
const GLfloat *value);
void glProgramUniformMatrix4fv(GLuint program, GLint location,
GLsizei count, GLboolean transpose,
const GLfloat *value);
void glProgramUniformMatrix2x3fv(GLuint program, GLint location,
GLsizei count, GLboolean transpose,
const GLfloat *value);
void glProgramUniformMatrix3x2fv(GLuint program, GLint location,
GLsizei count, GLboolean transpose,
const GLfloat *value);
void glProgramUniformMatrix2x4fv(GLuint program, GLint location,
GLsizei count, GLboolean transpose,
const GLfloat *value);
void glProgramUniformMatrix4x2fv(GLuint program, GLint location,
GLsizei count, GLboolean transpose,
const GLfloat *value);
void glProgramUniformMatrix3x4fv(GLuint program, GLint location,
GLsizei count, GLboolean transpose,
const GLfloat *value);
void glProgramUniformMatrix4x3fv(GLuint program, GLint location,
GLsizei count, GLboolean transpose,
const GLfloat *value);
PARAMETERS
program
Specifies the handle of the program containing the uniform variable
to be modified.
location
Specifies the location of the uniform value to be modified.
count
Specifies the number of matrices that are to be modified. This
should be 1 if the targeted uniform variable is not an array of
matrices, and 1 or more if it is an array of matrices.
transpose
Specifies whether to transpose the matrix as the values are loaded
into the uniform variable.
value
Specifies a pointer to an array of count values that will be used
to update the specified uniform variable.
DESCRIPTION
glProgramUniform modifies the value of a uniform variable or a uniform
variable array. The location of the uniform variable to be modified is
specified by location, which should be a value returned by
glGetUniformLocation(). glProgramUniform operates on the program
object specified by program.
The commands glProgramUniform{1|2|3|4}{f|i|ui} are used to change the
value of the uniform variable specified by location using the values
passed as arguments. The number specified in the command should match
the number of components in the data type of the specified uniform
variable (e.g., 1 for float, int, unsigned int, bool; 2 for vec2,
ivec2, uvec2, bvec2, etc.). The suffix f indicates that floating-point
values are being passed; the suffix i indicates that integer values are
being passed; the suffix ui indicates that unsigned integer values are
being passed, and this type should also match the data type of the
specified uniform variable. The i variants of this function should be
used to provide values for uniform variables defined as int, ivec2,
ivec3, ivec4, or arrays of these. The ui variants of this function
should be used to provide values for uniform variables defined as
unsigned int, uvec2, uvec3, uvec4, or arrays of these. The f variants
should be used to provide values for uniform variables of type float,
vec2, vec3, vec4, or arrays of these. Either the i, ui or f variants
may be used to provide values for uniform variables of type bool,
bvec2, bvec3, bvec4, or arrays of these. The uniform variable will be
set to false if the input value is 0 or 0.0f, and it will be set to
true otherwise.
All active uniform variables defined in a program object are
initialized to 0 when the program object is linked successfully. They
retain the values assigned to them by a call to glProgramUniform until
the next successful link operation occurs on the program object, when
they are once again initialized to 0.
The commands glProgramUniform{1|2|3|4}{f|i|ui}v can be used to modify a
single uniform variable or a uniform variable array. These commands
pass a count and a pointer to the values to be loaded into a uniform
variable or a uniform variable array. A count of 1 should be used if
modifying the value of a single uniform variable, and a count of 1 or
greater can be used to modify an entire array or part of an array. When
loading n elements starting at an arbitrary position m in a uniform
variable array, elements m + n - 1 in the array will be replaced with
the new values. If m + n - 1 is larger than the size of the uniform
variable array, values for all array elements beyond the end of the
array will be ignored. The number specified in the name of the command
indicates the number of components for each element in value, and it
should match the number of components in the data type of the specified
uniform variable (e.g., 1 for float, int, bool; 2 for vec2, ivec2,
bvec2, etc.). The data type specified in the name of the command must
match the data type for the specified uniform variable as described
previously for glProgramUniform{1|2|3|4}{f|i|ui}.
For uniform variable arrays, each element of the array is considered to
be of the type indicated in the name of the command (e.g.,
glProgramUniform3f or glProgramUniform3fv can be used to load a uniform
variable array of type vec3). The number of elements of the uniform
variable array to be modified is specified by count
The commands glProgramUniformMatrix{2|3|4|2x3|3x2|2x4|4x2|3x4|4x3}fv
are used to modify a matrix or an array of matrices. The numbers in the
command name are interpreted as the dimensionality of the matrix. The
number 2 indicates a 2 × 2 matrix (i.e., 4 values), the number 3
indicates a 3 × 3 matrix (i.e., 9 values), and the number 4 indicates a
4 × 4 matrix (i.e., 16 values). Non-square matrix dimensionality is
explicit, with the first number representing the number of columns and
the second number representing the number of rows. For example, 2x4
indicates a 2 × 4 matrix with 2 columns and 4 rows (i.e., 8 values). If
transpose is GL_FALSE, each matrix is assumed to be supplied in column
major order. If transpose is GL_TRUE, each matrix is assumed to be
supplied in row major order. The count argument indicates the number of
matrices to be passed. A count of 1 should be used if modifying the
value of a single matrix, and a count greater than 1 can be used to
modify an array of matrices.
NOTES
glProgramUniform1i and glProgramUniform1iv are the only two functions
that may be used to load uniform variables defined as sampler types.
Loading samplers with any other function will result in a
GL_INVALID_OPERATION error.
If count is greater than 1 and the indicated uniform variable is not an
array, a GL_INVALID_OPERATION error is generated and the specified
uniform variable will remain unchanged.
Other than the preceding exceptions, if the type and size of the
uniform variable as defined in the shader do not match the type and
size specified in the name of the command used to load its value, a
GL_INVALID_OPERATION error will be generated and the specified uniform
variable will remain unchanged.
If location is a value other than -1 and it does not represent a valid
uniform variable location in within program, an error will be
generated, and no changes will be made to the uniform variable storage
of program. If location is equal to -1, the data passed in will be
silently ignored and the specified uniform variable will not be
changed.
ERRORS
GL_INVALID_OPERATION is generated if program does not refer to a
program object owned by the GL.
GL_INVALID_OPERATION is generated if the size of the uniform variable
declared in the shader does not match the size indicated by the
glProgramUniform command.
GL_INVALID_OPERATION is generated if one of the signed or unsigned
integer variants of this function is used to load a uniform variable of
type float, vec2, vec3, vec4, or an array of these, or if one of the
floating-point variants of this function is used to load a uniform
variable of type int, ivec2, ivec3, ivec4, unsigned int, uvec2, uvec3,
uvec4, or an array of these.
GL_INVALID_OPERATION is generated if one of the signed integer variants
of this function is used to load a uniform variable of type unsigned
int, uvec2, uvec3, uvec4, or an array of these.
GL_INVALID_OPERATION is generated if one of the unsigned integer
variants of this function is used to load a uniform variable of type
int, ivec2, ivec3, ivec4, or an array of these.
GL_INVALID_OPERATION is generated if location is an invalid uniform
location for program and location is not equal to -1.
GL_INVALID_VALUE is generated if count is less than 0.
GL_INVALID_OPERATION is generated if count is greater than 1 and the
indicated uniform variable is not an array variable.
GL_INVALID_OPERATION is generated if a sampler is loaded using a
command other than glProgramUniform1i and glProgramUniform1iv.
ASSOCIATED GETS
glGetActiveUniform() with the handle of a program object and the index
of an active uniform variable
glGetUniform() with the handle of a program object and the location of
a uniform variable
glGetUniformLocation() with the handle of a program object and the name
of a uniform variable
SEE ALSO
glLinkProgram(), glUseProgram()
COPYRIGHT
Copyright © 2003-2005 3Dlabs Inc. Ltd. Copyright © 2010 Khronos Group.
This material may be distributed subject to the terms and conditions
set forth in the Open Publication License, v 1.0, 8 June 1999.
http://opencontent.org/openpub/.
AUTHORS
opengl.org
opengl.org 03/16/2013 GLPROGRAMUNIFORM(3G)
[top]
List of man pages available for RedHat
Copyright (c) for man pages and the logo by the respective OS vendor.
For those who want to learn more, the polarhome community provides shell access and support.
[legal]
[privacy]
[GNU]
[policy]
[cookies]
[netiquette]
[sponsors]
[FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
|
Vote for polarhome
|