named-xfer(8)named-xfer(8)NAMEnamed-xfer - Pulls BIND zones from another server
SYNOPSIS
/usr/sbin/named-xfer -z zone_to_transfer -f db_file -s serial_no [-d
debug_level] [-l debug_log_file] [-t trace_file] [-p port] [-S]
servers...
OPTIONS
Specifies the name of the BIND zone for the named-xfer daemon to trans‐
fer, for example, dec.com. This option is required to pull a zone.
Specifies the name of the file into which the pulled zone information
is placed. This option is required to pull a zone. Specifies the cur‐
rent serial number of the SOA record for the zone zone_to_transfer. If
serial_no is set to 0, the zone is always pulled. This option is
required to pull a zone. Sets the debug level and determines the
amount of debug information to be displayed. Specifies the file that
will contain any debug messages from the zone pull. Specifies the file
that will contain a trace from the zone pull. Specifies the port that
will be used instead of the default name server port listed in
/etc/services. Performs a restricted transfer of only the SOA, NS
records and glue A records for the zone. The SOA record is not loaded
by named, but is used to determine when to verify the NS records. See
named(8) for more information. Specifies a list of Internet addresses,
in dotted-quad format, from which to pull a zone. If the first host
cannot be reached, the named transfer daemon tries to pull the zone
from the next host listed.
DESCRIPTION
The named transfer daemon, /usr/sbin/named-xfer, is a server that is
usually run by the named daemon, /usr/sbin/named, but it can also be
run manually with the given arguments. The named transfer daemon runs
on a BIND secondary server and pulls BIND zones from a primary server.
This daemon is not run by default, nor can it be started up from
inetd(8).
SEE ALSO
Commands: named(8)
Files: resolver(4), services(4)named-xfer(8)