RHINO(8) Network UPS Tools (NUT) RHINO(8)NAMErhino - Driver for Brazilian Microsol RHINO UPS equipment
NOTE
This man page only documents the hardware‐specific features of the
rhino driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver has been tested with :
Rhino 6000 VA
Rhino 7500 VA
Rhino 10000 VA
Rhino 20000 VA
All Rhino models are senoidal on‐line
EXTRA ARGUMENTS
This driver support the following extra optional settings in the
ups.conf(5).
battext = n ‐ (default = 0, no extra battery, where n = Ampere*hour )
UPSCMD
load.on ‐ Turn on the load immediately
load.off ‐ Turn off the load immediately
bypass.start ‐ Put the UPS in bypass mode
bypass.stop ‐ Put the UPS out of bypass mode
shutdown.stayoff ‐ Shut down in 3 minutes and do not return
AUTHOR
Silvino B. Magalhães <sbm2yk@gmail.com>
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Wed Nov 30 2005 RHINO(8)