CREATE_SEQUENCE man page on Oracle

Man page or keyword search:  
man Server   33470 pages
apropos Keyword Search (all sections)
Output format
Oracle logo
[printable version]

CREATE SEQUENCE(7)	PostgreSQL 9.2.7 Documentation	    CREATE SEQUENCE(7)

       CREATE_SEQUENCE - define a new sequence generator

       CREATE [ TEMPORARY | TEMP ] SEQUENCE name [ INCREMENT [ BY ] increment ]
	   [ MINVALUE minvalue | NO MINVALUE ] [ MAXVALUE maxvalue | NO MAXVALUE ]
	   [ START [ WITH ] start ] [ CACHE cache ] [ [ NO ] CYCLE ]
	   [ OWNED BY { table_name.column_name | NONE } ]

       CREATE SEQUENCE creates a new sequence number generator. This involves
       creating and initializing a new special single-row table with the name
       name. The generator will be owned by the user issuing the command.

       If a schema name is given then the sequence is created in the specified
       schema. Otherwise it is created in the current schema. Temporary
       sequences exist in a special schema, so a schema name cannot be given
       when creating a temporary sequence. The sequence name must be distinct
       from the name of any other sequence, table, index, view, or foreign
       table in the same schema.

       After a sequence is created, you use the functions nextval, currval,
       and setval to operate on the sequence. These functions are documented
       in Section 9.16, “Sequence Manipulation Functions”, in the

       Although you cannot update a sequence directly, you can use a query

	   SELECT * FROM name;

       to examine the parameters and current state of a sequence. In
       particular, the last_value field of the sequence shows the last value
       allocated by any session. (Of course, this value might be obsolete by
       the time it's printed, if other sessions are actively doing nextval

	   If specified, the sequence object is created only for this session,
	   and is automatically dropped on session exit. Existing permanent
	   sequences with the same name are not visible (in this session)
	   while the temporary sequence exists, unless they are referenced
	   with schema-qualified names.

	   The name (optionally schema-qualified) of the sequence to be

	   The optional clause INCREMENT BY increment specifies which value is
	   added to the current sequence value to create a new value. A
	   positive value will make an ascending sequence, a negative one a
	   descending sequence. The default value is 1.

       minvalue, NO MINVALUE
	   The optional clause MINVALUE minvalue determines the minimum value
	   a sequence can generate. If this clause is not supplied or NO
	   MINVALUE is specified, then defaults will be used. The defaults are
	   1 and -263-1 for ascending and descending sequences, respectively.

       maxvalue, NO MAXVALUE
	   The optional clause MAXVALUE maxvalue determines the maximum value
	   for the sequence. If this clause is not supplied or NO MAXVALUE is
	   specified, then default values will be used. The defaults are 263-1
	   and -1 for ascending and descending sequences, respectively.

	   The optional clause START WITH start allows the sequence to begin
	   anywhere. The default starting value is minvalue for ascending
	   sequences and maxvalue for descending ones.

	   The optional clause CACHE cache specifies how many sequence numbers
	   are to be preallocated and stored in memory for faster access. The
	   minimum value is 1 (only one value can be generated at a time,
	   i.e., no cache), and this is also the default.

	   The CYCLE option allows the sequence to wrap around when the
	   maxvalue or minvalue has been reached by an ascending or descending
	   sequence respectively. If the limit is reached, the next number
	   generated will be the minvalue or maxvalue, respectively.

	   If NO CYCLE is specified, any calls to nextval after the sequence
	   has reached its maximum value will return an error. If neither
	   CYCLE or NO CYCLE are specified, NO CYCLE is the default.

       OWNED BY table_name.column_name, OWNED BY NONE
	   The OWNED BY option causes the sequence to be associated with a
	   specific table column, such that if that column (or its whole
	   table) is dropped, the sequence will be automatically dropped as
	   well. The specified table must have the same owner and be in the
	   same schema as the sequence.	 OWNED BY NONE, the default, specifies
	   that there is no such association.

       Use DROP SEQUENCE to remove a sequence.

       Sequences are based on bigint arithmetic, so the range cannot exceed
       the range of an eight-byte integer (-9223372036854775808 to
       9223372036854775807). On some older platforms, there might be no
       compiler support for eight-byte integers, in which case sequences use
       regular integer arithmetic (range -2147483648 to +2147483647).

       Unexpected results might be obtained if a cache setting greater than
       one is used for a sequence object that will be used concurrently by
       multiple sessions. Each session will allocate and cache successive
       sequence values during one access to the sequence object and increase
       the sequence object's last_value accordingly. Then, the next cache-1
       uses of nextval within that session simply return the preallocated
       values without touching the sequence object. So, any numbers allocated
       but not used within a session will be lost when that session ends,
       resulting in “holes” in the sequence.

       Furthermore, although multiple sessions are guaranteed to allocate
       distinct sequence values, the values might be generated out of sequence
       when all the sessions are considered. For example, with a cache setting
       of 10, session A might reserve values 1..10 and return nextval=1, then
       session B might reserve values 11..20 and return nextval=11 before
       session A has generated nextval=2. Thus, with a cache setting of one it
       is safe to assume that nextval values are generated sequentially; with
       a cache setting greater than one you should only assume that the
       nextval values are all distinct, not that they are generated purely
       sequentially. Also, last_value will reflect the latest value reserved
       by any session, whether or not it has yet been returned by nextval.

       Another consideration is that a setval executed on such a sequence will
       not be noticed by other sessions until they have used up any
       preallocated values they have cached.

       Create an ascending sequence called serial, starting at 101:


       Select the next number from this sequence:

	   SELECT nextval('serial');


       Select the next number from this sequence:

	   SELECT nextval('serial');


       Use this sequence in an INSERT command:

	   INSERT INTO distributors VALUES (nextval('serial'), 'nothing');

       Update the sequence value after a COPY FROM:

	   COPY distributors FROM 'input_file';
	   SELECT setval('serial', max(id)) FROM distributors;

       CREATE SEQUENCE conforms to the SQL standard, with the following

       ·   The standard's AS <data type> expression is not supported.

       ·   Obtaining the next value is done using the nextval() function
	   instead of the standard's NEXT VALUE FOR expression.

       ·   The OWNED BY clause is a PostgreSQL extension.


PostgreSQL 9.2.7		  2014-02-17		    CREATE SEQUENCE(7)

List of man pages available for Oracle

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
Vote for polarhome
Free Shell Accounts :: the biggest list on the net