TIFFReadRGBATile man page on QNX

Man page or keyword search:  
man Server   4347 pages
apropos Keyword Search (all sections)
Output format
QNX logo
[printable version]

TIFFReadRGBATile(3TIFF)				       TIFFReadRGBATile(3TIFF)

       TIFFReadRGBATile	 -  read  and decode an image tile into a fixed-format

       #include <tiffio.h>

       #define TIFFGetR(abgr)	((abgr) & 0xff)
       #define TIFFGetG(abgr)	(((abgr) >> 8) & 0xff)
       #define TIFFGetB(abgr)	(((abgr) >> 16) & 0xff)
       #define TIFFGetA(abgr)	(((abgr) >> 24) & 0xff)

       int TIFFReadRGBATile(TIFF *tif, uint32 x, uint32 y, uint32 *raster)

       TIFFReadRGBATile reads a single tile of a tile-based image into memory,
       storing	the  result  in	 the user supplied RGBA raster.	 The raster is
       assumed to be an array of width	times  length  32-bit  entries,	 where
       width  is  the  width  of  a tile (TIFFTAG_TILEWIDTH) and length is the
       height of a tile (TIFFTAG_TILELENGTH).

       The x and y values are the offsets from the top left corner to the  top
       left  corner of the tile to be read.  They must be an exact multiple of
       the tile width and length.

       Note that the raster is assume to be organized such that the  pixel  at
       location	 (x,y)	is  raster[y*width+x];	with  the raster origin in the
       lower-left hand corner of the tile. That is bottom to top organization.
       Edge  tiles  which  partly  fall	 off the image will be filled out with
       appropriate zeroed areas.

       Raster pixels are 8-bit packed red, green,  blue,  alpha	 samples.  The
       macros  TIFFGetR,  TIFFGetG,  TIFFGetB,	and TIFFGetA should be used to
       access individual samples.  Images  without  Associated	Alpha  matting
       information have a constant Alpha of 1.0 (255).

       See the TIFFRGBAImage(3TIFF) page for more details on how various image
       types are converted to RGBA values.

       Samples must be either 1, 2,  4,	 8,  or	 16  bits.  Colorimetric  sam‐
       ples/pixel  must	 be  either  1,	 3,  or 4 (i.e.	 SamplesPerPixel minus

       Palette image colormaps that appear to be incorrectly written as	 8-bit
       values are automatically scaled to 16-bits.

       TIFFReadRGBATile	 is just a wrapper around the more general TIFFRGBAIm‐
       age(3TIFF) facilities.  It's main advantage over the similar  TIFFRead‐
       RGBAImage()  function  is that for large images a single buffer capable
       of holding the whole image doesn't need to be  allocated,  only	enough
       for  one	 tile.	The TIFFReadRGBAStrip() function does a similar opera‐
       tion for stripped images.

       1 is returned if the image was successfully read and converted.	Other‐
       wise, 0 is returned if an error was encountered.

       All error messages are directed to the TIFFError(3TIFF) routine.

       Sorry,  can  not	 handle	 %d-bit pictures.  The image had BitsPerSample
       other than 1, 2, 4, 8, or 16.

       Sorry, can not handle %d-channel images.	 The image had SamplesPerPixel
       other than 1, 3, or 4.

       Missing needed "PhotometricInterpretation" tag.	The image did not have
       a tag that describes how to display the data.

       No "PhotometricInterpretation" tag, assuming RGB.  The image was	 miss‐
       ing  a  tag that describes how to display it, but because it has 3 or 4
       samples/pixel, it is assumed to be RGB.

       No "PhotometricInterpretation" tag, assuming min-is-black.   The	 image
       was  missing a tag that describes how to display it, but because it has
       1 sample/pixel, it is assumed to be a grayscale or bilevel image.

       No space for photometric conversion table.  There was insufficient mem‐
       ory for a table used to convert image samples to 8-bit RGB.

       Missing	required  "Colormap"  tag.   A	Palette	 image	did not have a
       required Colormap tag.

       No space for tile buffer.  There was insufficient memory to allocate an
       i/o buffer.

       No  space  for strip buffer.  There was insufficient memory to allocate
       an i/o buffer.

       Can not handle format.  The image has a format (combination of BitsPer‐
       Sample,	SamplesPerPixel, and PhotometricInterpretation) that TIFFRead‐
       RGBAImage can not handle.

       No space for B&W mapping table.	There was insufficient memory to allo‐
       cate a table used to map grayscale data to RGB.

       No  space  for Palette mapping table.  There was insufficient memory to
       allocate a table used to map data to 8-bit RGB.

       ReadRGBAStrip(3TIFF), libtiff(3TIFF)

       Libtiff library home page: http://www.remotesensing.org/libtiff/

libtiff			       December 10, 1998       TIFFReadRGBATile(3TIFF)
                             _         _         _ 
                            | |       | |       | |     
                            | |       | |       | |     
                         __ | | __ __ | | __ __ | | __  
                         \ \| |/ / \ \| |/ / \ \| |/ /  
                          \ \ / /   \ \ / /   \ \ / /   
                           \   /     \   /     \   /    
                            \_/       \_/       \_/ 
More information is available in HTML format for server QNX

List of man pages available for QNX

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
Vote for polarhome
Free Shell Accounts :: the biggest list on the net