at man page on OpenDarwin

Man page or keyword search:  
man Server   3202 pages
apropos Keyword Search (all sections)
Output format
OpenDarwin logo
[printable version]

AT(1)			  BSD General Commands Manual			 AT(1)

NAME
     at, batch, atq, atrm — queue, examine or delete jobs for later execution

SYNOPSIS
     at [-q queue] [-f file] [-mldbv] time
     at [-q queue] [-f file] [-mldbv] -t [[CC]YY]MMDDhhmm[.SS]
     at -c job [job ...]
     at -l [job ...]
     at -l -q queue
     at -r job [job ...]

     atq [-q queue] [-v]

     atrm job [job ...]

     batch [-q queue] [-f file] [-mv] [time]

DESCRIPTION
     The at and batch utilities read commands from standard input or a speci‐
     fied file which are to be executed at a later time, using sh(1).

     at	     executes commands at a specified time;

     atq     lists the user's pending jobs, unless the user is the superuser;
	     in that case, everybody's jobs are listed;

     atrm    deletes jobs;

     batch   executes commands when system load levels permit; in other words,
	     when the load average drops below _LOADAVG_MX, or the value spec‐
	     ified in the invocation of atrun.

     The at utility allows some moderately complex time specifications.	 It
     accepts times of the form HHMM or HH:MM to run a job at a specific time
     of day.  (If that time is already past, the next day is assumed.)	As an
     alternative, the following keywords may be specified: midnight, noon, or
     teatime (4pm) and time-of-day may be suffixed with AM or PM for running
     in the morning or the evening.  The day on which the job is to be run may
     also be specified by giving a date in the form month-name day with an
     optional year, or giving a date of the forms DD.MM.YYYY, DD.MM.YY,
     MM/DD/YYYY, MM/DD/YY, MMDDYYYY, or MMDDYY.	 The specification of a date
     must follow the specification of the time of day.	Time can also be spec‐
     ified as: [now] + count time-units, where the time-units can be minutes,
     hours, days, weeks, months or years and at may be told to run the job
     today by suffixing the time with today and to run the job tomorrow by
     suffixing the time with tomorrow.

     For example, to run a job at 4pm three days from now, use at 4pm + 3
     days, to run a job at 10:00am on July 31, use at 10am Jul 31 and to run a
     job at 1am tomorrow, use at 1am tomorrow.

     The at utility also supports the POSIX time format (see -t option).

     For both at and batch, commands are read from standard input or the file
     specified with the -f option and executed.	 The working directory, the
     environment (except for the variables TERM, TERMCAP, DISPLAY and _) and
     the umask are retained from the time of invocation.  An at or batch com‐
     mand invoked from a su(1) shell will retain the current userid.  The user
     will be mailed standard error and standard output from his commands, if
     any.  Mail will be sent using the command sendmail(8).  If at is executed
     from a su(1) shell, the owner of the login shell will receive the mail.

     The superuser may use these commands in any case.	For other users, per‐
     mission to use at is determined by the files _PERM_PATH/at.allow and
     _PERM_PATH/at.deny.

     If the file _PERM_PATH/at.allow exists, only usernames mentioned in it
     are allowed to use at.  In these two files, a user is considered to be
     listed only if the user name has no blank or other characters before it
     on its line and a newline character immediately after the name, even at
     the end of the file.  Other lines are ignored and may be used for com‐
     ments.

     If _PERM_PATH/at.allow does not exist, _PERM_PATH/at.deny is checked,
     every username not mentioned in it is then allowed to use at.

     If neither exists, only the superuser is allowed use of at.  This is the
     default configuration.

IMPLEMENTATION NOTES
     Note that at is implemented through the cron(8) daemon by calling
     atrun(8) every five minutes.  This implies that the granularity of at
     might not be optimal for every deployment.	 If a finer granularity is
     needed, the system crontab at /etc/crontab needs to be changed.

OPTIONS
     -q queue
	     Use the specified queue.  A queue designation consists of a sin‐
	     gle letter; valid queue designations range from a to z and A to
	     Z.	 The _DEFAULT_AT_QUEUE queue is the default for at and the
	     _DEFAULT_BATCH_QUEUE queue for batch.  Queues with higher letters
	     run with increased niceness.  If a job is submitted to a queue
	     designated with an uppercase letter, it is treated as if it had
	     been submitted to batch at that time.  If atq is given a specific
	     queue, it will only show jobs pending in that queue.

     -m	     Send mail to the user when the job has completed even if there
	     was no output.

     -f file
	     Read the job from file rather than standard input.

     -l	     With no arguments, list all jobs for the invoking user.  If one
	     or more job numbers are given, list only those jobs.

     -d	     Is an alias for atrm (this option is deprecated; use -r instead).

     -b	     Is an alias for batch.

     -v	     For atq, shows completed but not yet deleted jobs in the queue;
	     otherwise shows the time the job will be executed.

     -c	     Cat the jobs listed on the command line to standard output.

     -r	     Remove the specified jobs.

     -t	     Specify the job time using the POSIX time format.	The argument
	     should be in the form [[CC]YY]MMDDhhmm[.SS] where each pair of
	     letters represents the following:

		   CC	   The first two digits of the year (the century).
		   YY	   The second two digits of the year.
		   MM	   The month of the year, from 1 to 12.
		   DD	   the day of the month, from 1 to 31.
		   hh	   The hour of the day, from 0 to 23.
		   mm	   The minute of the hour, from 0 to 59.
		   SS	   The second of the minute, from 0 to 61.

	     If the CC and YY letter pairs are not specified, the values
	     default to the current year.  If the SS letter pair is not speci‐
	     fied, the value defaults to 0.

FILES
     _ATJOB_DIR		   directory containing job files
     _ATSPOOL_DIR	   directory containing output spool files
     /var/run/utmp	   login records
     _PERM_PATH/at.allow   allow permission control
     _PERM_PATH/at.deny	   deny permission control
     _ATJOB_DIR/_LOCKFILE  job-creation lock file

SEE ALSO
     nice(1), sh(1), umask(2), atrun(8), cron(8), sendmail(8)

BUGS
     If the file /var/run/utmp is not available or corrupted, or if the user
     is not logged on at the time at is invoked, the mail is sent to the
     userid found in the environment variable LOGNAME.	If that is undefined
     or empty, the current userid is assumed.

     The at and batch utilities as presently implemented are not suitable when
     users are competing for resources.	 If this is the case, another batch
     system such as nqs may be more suitable.

     Specifying a date past 2038 may not work on some systems.

AUTHORS
     At was mostly written by Thomas Koenig ⟨ig25@rz.uni-karlsruhe.de⟩.	 The
     time parsing routines are by
     David Parsons ⟨orc@pell.chi.il.us⟩, with minor enhancements by
     Joe Halpin ⟨joe.halpin@attbi.com⟩.

BSD			       January 13, 2002				   BSD
[top]

List of man pages available for OpenDarwin

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
...................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net