atmarp man page on Manjaro

Man page or keyword search:  
man Server   11224 pages
apropos Keyword Search (all sections)
Output format
Manjaro logo
[printable version]

ATMARP(8)		     Maintenance Commands		     ATMARP(8)

       atmarp - administer classical IP over ATM connections

       atmarp -a
       atmarp -c [[atm]number]
       atmarp -q ip_addr [qos qos] [sndbuf bytes]
       atmarp -s ip_addr [itf.]vpi.vci [qos qos] [sndbuf bytes] [temp] [pub]
       atmarp -s ip_addr atm_addr [qos qos] [sndbuf bytes] [temp] [pub] [arp‐
       atmarp -d ip_addr [arpsrv]
       atmarp -V

       atmarp  is  used to maintain the ATMARP table of the ATMARP demon.  The
       table can be listed, new PVC and SVC entries can be added, and existing
       entries	can  be	 deleted.  In addition to that, atmarp is also used to
       create new IP over ATM interfaces.

       Note that the kernel has its own ATMARP table containing	 only  entries
       for destinations to which a connection exists. The table of atmarpd can
       also contain currently unused entries.

       -a     list the current ATMARP table.

       -c     create the specified IP interface. If the	 interface  number  is
	      omitted,	the  operating system assigns the next free number and
	      atmarp prints the resulting  interface  name  (e.g.  `atm0')  on
	      standard output.

       -q     sets  the QOS and the send buffer size to use as the default for
	      all VCs generated for that  IP  network  (ip_addr	 must  be  the
	      address of the network).

       -s     set  up  a PVC or create an SVC entry. The following options are

	      qos qos
		     uses the specified quality of service (see qos(7) for the
		     syntax). UBR at link speed is used by default.

	      sndbuf bytes
		     tries  to	set the send buffer to the specified number of
		     bytes. A system default value is used if  sndbuf  is  not

	      temp   does  not	mark the entry as permanent, i.e. it will time
		     out and then be removed.

	      pub    publishes the entry (only relevant	 for  ATMARP  server).
		     ATMARP  requests  for  entries  not marked for publishing
		     yield an ATMARP_NAK response.

	      null   uses NULL encapsulation instead of LLC/SNAP encapsulation
		     on	 the  PVC.  This  option  is  not  available for SVCs,
		     because the  LLC/SNAP  header  is	required  to  identify
		     ATMARP  packets. null also implies that the entry is per‐

	      arpsrv identifies the entry pointing to the ATMARP server.  Note
		     that  the	node  acting as the ATMARP server must have no
		     ATMARP server entry in its ATMARP table.

       -d     delete the specified ARP entry.  In order to prevent  accidental
	      deletion	of  the	 ATMARP	 server entry, the arpsrv flag must be
	      specified when deleting it.

       -V     print the version number of atmarp on standard output and exit.

       /var/run/atmarpd.table	ATMARP table
       Werner Almesberger, EPFL ICA <>
       atmarpd(8), clip(8), qos(7)

Linux				April 26, 2000			     ATMARP(8)

List of man pages available for Manjaro

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
Vote for polarhome
Free Shell Accounts :: the biggest list on the net