crdup man page on FreeBSD

Man page or keyword search:  
man Server   9747 pages
apropos Keyword Search (all sections)
Output format
FreeBSD logo
[printable version]

UCRED(9)		 BSD Kernel Developer's Manual		      UCRED(9)

     ucred, crget, crhold, crfree, crshared, crcopy, crdup, cru2x,
     cred_update_thread — functions related to user credentials

     #include <sys/param.h>
     #include <sys/ucred.h>

     struct ucred *

     struct ucred *
     crhold(struct ucred *cr);

     crfree(struct ucred *cr);

     crshared(struct ucred *cr);

     crcopy(struct ucred *dest, struct ucred *src);

     struct ucred *
     crcopysafe(struct proc *p, struct ucred *cr);

     struct ucred *
     crdup(struct ucred *cr);

     crsetgroups(struct ucred *cr, int ngrp, gid_t *groups);

     cru2x(struct ucred *cr, struct xucred *xcr);

     cred_update_thread(struct thread *td);

     The ucred family of functions is used to manage user credential struc‐
     tures (struct ucred) within the kernel.

     The crget() function allocates memory for a new structure, sets its ref‐
     erence count to 1, and initializes its lock.

     The crhold() function increases the reference count on the credential.

     The crfree() function decreases the reference count on the credential.
     If the count drops to 0, the storage for the structure is freed.

     The crshared() function returns true if the credential is shared.	A cre‐
     dential is considered to be shared if its reference count is greater than

     The crcopy() function copies the contents of the source (template) cre‐
     dential into the destination template.  The uidinfo structure within the
     destination is referenced by calling uihold(9).

     The crcopysafe() function copies the current credential associated with
     the process p into the newly allocated credential cr.  The process lock
     on p must be held and will be dropped and reacquired as needed to allo‐
     cate group storage space in cr.

     The crdup() function allocates memory for a new structure and copies the
     contents of cr into it.  The actual copying is performed by crcopy().

     The crsetgroups() function sets the cr_groups and cr_ngroups variables
     and allocates space as needed.  It also truncates the group list to the
     current maximum number of groups.	No other mechanism should be used to
     modify the cr_groups array except for updating the primary group via
     assignment to cr_groups[0].

     The cru2x() function converts a ucred structure to an xucred structure.
     That is, it copies data from cr to xcr; it ignores fields in the former
     that are not present in the latter (e.g., cr_uidinfo), and appropriately
     sets fields in the latter that are not present in the former (e.g.,

     The cred_update_thread() function sets the credentials of td to that of
     its process, freeing its old credential if required.

     crget(), crhold(), crdup(), and crcopysafe() all return a pointer to a
     ucred structure.

     crshared() returns 0 if the credential has a reference count greater than
     1; otherwise, 1 is returned.

     As of FreeBSD 5.0, the ucred structure contains extensible fields.	 This
     means that the correct protocol must always be followed to create a fresh
     and writable credential structure: new credentials must always be derived
     from existing credentials using crget(), crcopy(), and crcopysafe().

     In the common case, credentials required for access control decisions are
     used in a read-only manner.  In these circumstances, the thread creden‐
     tial td_ucred should be used, as it requires no locking to access safely,
     and remains stable for the duration of the call even in the face of a
     multi-threaded application changing the process credentials from another

     During a process credential update, the process lock must be held across
     check and update, to prevent race conditions.  The process credential,
     td->td_proc->p_ucred, must be used both for check and update.  If a
     process credential is updated during a system call and checks against the
     thread credential are to be made later during the same system call, the
     thread credential must also be refreshed from the process credential so
     as to prevent use of a stale value.  To avoid this scenario, it is recom‐
     mended that system calls updating the process credential be designed to
     avoid other authorization functions.

     If temporarily elevated privileges are required for a thread, the thread
     credential can by replaced for the duration of an activity, or for the
     remainder of the system call.  However, as a thread credential is often
     shared, appropriate care should be taken to make sure modifications are
     made to a writable credential through the use of crget() and crcopy().

     Caution should be exercised when checking authorization for a thread or
     process perform an operation on another thread or process.	 As a result
     of temporary elevation, the target thread credential should never be used
     as the target credential in an access control decision: the process cre‐
     dential associated with the thread, td->td_proc->p_ucred, should be used
     instead.  For example, p_candebug(9) accepts a target process, not a tar‐
     get thread, for access control purposes.


     This manual page was written by Chad David ⟨⟩.

BSD				 June 19, 2009				   BSD

List of man pages available for FreeBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
Vote for polarhome
Free Shell Accounts :: the biggest list on the net