DFU-PROGRAMMER(1)DFU-PROGRAMMER(1)NAMEdfu-programmer - USB firmware upgrading for Atmel microcontrollers
SYNOPSISdfu-programmer target command [options] [parameters]
DESCRIPTIONdfu-programmer is a Linux command line Device Firmware Upgrade (DFU)
based programmer for the flash memory on Atmel AVR, AVR32 and 8051
based microcontrollers which ship with a USB boot loader. It supports
In System Programming (ISP) for developers and potentially product
updates in the field. Those boot loaders are patterned after the
standard USB DFU 1.0 class specification, but depend on extensions
defined by Atmel to the extent that standard DFU drivers will not work.
To use it, first connect the device to be programmed and ensure that it
comes up in DFU mode. The microcontrollers come up in that mode as
shipped by Atmel; or they may reenter that mode after a special
hardware reset. Then invoke this program to issue one or more DFU
commands. You will normally need to start by issuing the "erase"
command; the default security policies prevent extracting firmware, to
prevent reverse engineering of what is usually proprietary code.
SUPPORTED MICROCONTROLLERS
These chip names are used as the command line "target" parameter.
8051 based controllers:
at89c51snd1c, at89c51snd2c, at89c5130, at89c5131, and at89c5132.
AVR based controllers:
at90usb1287, at90usb1286, at90usb647, at90usb646, at90usb162,
at90usb82, atmega32u6, atmega32u4, atmega32u2, atmega16u4,
atmega16u2 and atmega8u2.
AVR32 based controllers:
at32uc3a0128, at32uc3a1128, at32uc3a0256, at32uc3a1256,
at32uc3a0512, at32uc3a1512, at32uc3a0512es, at32uc3a1512es,
at32uc3a364, at32uc3a364s, at32uc3a3128, at32uc3a3128s,
at32uc3a3256, at32uc3a3256s, at32uc3b064, at32uc3b164,
at32uc3b0128, at32uc3b1128, at32uc3b0256, at32uc3b1256,
at32uc3b0256es, at32uc3b1256es, at32uc3b1512, at32uc3b0512,
at32uc3c064, at32uc3c0128, at32uc3c0256, at32uc3c0512,
at32uc3c164, at32uc3c1128, at32uc3c1256, at32uc3c1512,
at32uc3c264, at32uc3c2128, at32uc3c2256 and at32uc3c2512.
USAGE
There are no mechanisms for selecting which single device should be
programmed, or to implement gang programming. Accordingly, you will
usually avoid connecting more than one device of a given family (AVR,
AVR32 or 8051) at a time.
All of these commands support the "global options". Unless you
override it, commands which write to the microcontroller will perform a
validation step that rereads the data which was written, compares it to
the expected result, and reports any errors.
configure register [--suppress-validation] data
Bootloaders for 8051 based controllers support writing certain
configuration bytes.
dump
Reads all the available flash memory, and writes it as binary
data to stdout.
dump-eeprom
Reads all the available eeprom memory, and writes it as binary
data to stdout.
dump-user
Reads the user space flash on the AVR32 chips and writes it as
binary data to stdout.
erase [--suppress-validation]
Erases all the flash memory. This is required before the
bootloader will perform other commands.
flash [--suppress-validation] [--suppress-bootloader-mem] file or STDIN
Writes flash memory. The input file (or stdin) must use the
"ihex" file format convention for a memory image.
--suppress-bootloader-mem ignores any data written to the
bootloader memory space when flashing the device. This option
is particularly useful for the AVR32 chips trampoline code.
flash-user [--suppress-validation] file or STDIN
Writes to user space flash on the AVR32 chips. This block of
flash is out of the normal range of flash blocks and is designed
to contain configuration parameters. The input file (or stdin)
mus use the "ihex" file format convention for a memory image.
eeprom-flash [--suppress-validation] file or STDIN
Writes to eeprom memory. The input file (or stdin) must use the
"ihex" file format convention for a memory image.
get register
Displays various product identifier bytes.
reset
Resets microcontroller using watchdog timer
start
Starts the application firmware by having the microcontroller
jump to address zero.
version
This prints a string identifying the version of this utility.
Global Options
--quiet - minimizes the output
--debug level - enables verbose output at the specified level
Configure Registers
The standard bootloader for 8051 based chips supports writing data
bytes which are not relevant for the AVR based chips.
BSB - boot status byte
SBV - software boot vector
SSB - software security byte
EB - extra byte
HSB - hardware security byte
Get Register
bootloader-version - currently flashed bootloader version
ID1 - device boot identification 1
ID2 - device boot identification 2
manufacturer - the hardware manufacturer code
family - the product family code
product-name - the product name
product-revision - the product revision
HSB - same as the configure_register version
BSB - same as the configure_register version
SBV - same as the configure_register version
SSB - same as the configure_register version
EB - same as the configure_register version
BUGS
None known.
KNOWN ISSUES
The at90usb series chips do not make available any read/write protect
flags so the dump or flash command may fail with a less than helpful
error message.
To remove any write or read protection from any chips, a full chip
erasure is required.
You may need to be a member of the uucp group in order to have access
to the device without needing to be root.
AUTHOR
Weston Schmidt <weston_schmidt@alumni.purdue.edu>
SEE ALSO
http://dfu-programmer.sourceforge.net
http://atmel.com/dyn/resources/prod_documents/doc7745.pdf
COPYRIGHT
Copyright (C) 2005-2012 Weston Schmidt
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
DFU-PROGRAMMER December 22, 2012 DFU-PROGRAMMER(1)
