ETCUPDATE(8) BSD System Manager's Manual ETCUPDATE(8)NAMEetcupdate — update the configuration and startup files in /etc
SYNOPSISetcupdate [-ahlv] [-p pager] [-s {srcdir | tgzdir | tgzfile}]
[-t temproot] [-w width]
DESCRIPTIONetcupdate is a tool that lets the administrator update the configuration
and startup files in /etc (and some other directories like /dev, /root
and /var) without having to manually check and modify every file. The
administrator should run this script after performing an operating system
update (e.g. after running make build in /usr/src or after extracting new
binary distribution files) to update to the latest configuration and
startup files.
etcupdate compares the new configuration files against the currently
installed files. The user is given the option of installing, merging or
deleting each modified or missing file. The user can also view the dif‐
ferences between the files. By default, it shows the differences in the
unified diff format. The default format can be toggled to show the dif‐
ferences in unified, context, or side by side formats or an user-defined
command may be used to view differences. (And if wdiff is installed, it
can also show differences on a word by word basis.)
etcupdate also detects if the user installs certain special files and
performs corresponding tasks like remaking device nodes or rebuilding a
database from the aliases(5) file. Finally, etcupdate runs
postinstall(8) to check the results.
etcupdate needs a clean set of new configuration files to compare the
existing files against. These files, called the “reference files” in
this manual, may be derived from either a source or binary distribution
of NetBSD.
If the user is updating from sources (which is the default mode),
etcupdate will first create a copy of the reference files by running make
distribution in /usr/src/etc, installing the files to a so-called
temproot. (See usage of the -s srcdir and -t temproot options later in
this manual page.) Although this is the default mode, it is not recom‐
mended (see the “BUGS” section).
Instead of using sources, it is recommended that the user should extract
one or more binary distribution sets in a special location and use those
as the reference files (see usage of the -s tgzdir option later in this
manual page), or specify one or more binary distribution sets directly
(see usage of the -s tgzfile option later in this manual page).
The following options are available:
-aetcupdate can automatically update files which have not
been modified locally. The -a flag instructs etcupdate to
store MD5 checksums in /var/etcupdate and use these check‐
sums to determine if there have been any local modifica‐
tions.
-h Prints a help text.
-l Automatically skip files with unchanged RCS IDs. This has
the effect of leaving alone files that have been altered
locally but which have not been changed in the reference
files. Since this works using RCS IDs, files without RCS
IDs will not be skipped even if only modified locally.
This flag may be used together with the -a flag described
above.
-p pager The pager to use when displaying files. By default this
is more(1) but it can be changed either with this option
or by defining the PAGER variable.
-s {srcdir | tgzdir | tgzfile}
The location of the reference files, or the NetBSD source
files used to create the reference files. This may be
specified in one of three ways:
-s srcdir The top level directory of the NetBSD
source tree. By default this is /usr/src
but it can be changed either with this
option or the SRCDIR variable. The refer‐
ence files will be created by running “make
distribution” in the srcdir/etc directory.
Note that srcdir should refer to the top of
the source directory tree; earlier versions
of etcupdate expected srcdir to refer to
the etc subdirectory within the source
tree.
-s tgzdir A directory in which reference files have
been extracted from a binary distribution
of NetBSD. The files that are distributed
in the “etc.tgz” set file must be present.
The files that are distributed in the
“xetc.tgz” set file are optional. The ref‐
erence files from the specified directory
will be copied to the temproot directory.
-s tgzfile The location of a set file (or “tgz file”)
such as “etc.tgz” or “xetc.tgz” from a
binary distribution of NetBSD. Each set
file is a compressed archive containing
reference files, which will be extracted to
the temproot directory. Multiple -s
options may be used to specify multiple set
files. The “etc.tgz” set file must be
specified. The “xetc.tgz” set file is
optional.
-t temproot Specifies the location of the temproot directory. This
directory will be used for a temporary copy of the refer‐
ence files created by running “make distribution” in the
source directory specified by -s srcdir, or a temporary
copy of the reference files extracted from the binary sets
specified by -s tgzfile, or a temporary copy of the refer‐
ence files from the directory specified by -s tempdir. By
default this is /tmp/temproot but can be changed either
with this option or the TEMPROOT environment variable.
-v Makes etcupdate verbose about its actions.
-w width Sets screen width used during interactive merge. By
default this is the number of columns stty(1) reports but
it can be changed either with this option or by defining
the WIDTH variable. This is useful for xterm(1) users
with wider shell windows.
ENVIRONMENT
TEMPROOT Sets a default value for temproot. See -t above.
SRCDIR The location of the NetBSD sources files. See -s above.
PAGER The pager to use when displaying files. See -p above.
WIDTH The screen width used during interactive merge. See -w
above.
IGNOREFILES A list of files that etcupdate should ignore. Files
listed in this variable will never be considered for
updating by etcupdate.
FILES
The environment variables can also be defined in the following configura‐
tion files. The user's personal configuration file settings override the
global settings.
/etc/etcupdate.conf
~/.etcupdaterc
EXAMPLES
You have just upgraded your NetBSD host from 3.0 to 4.0 and now it's time
to update the configuration files as well. To update the configuration
files from the sources (if you have the /usr/src/etc directory):
etcupdate
The default location of the source files is /usr/src but this may be
overridden with the -s srcdir command line argument:
etcupdate-s /some/where/src
To update the configuration files from binary distribution sets do some‐
thing like this:
etcupdate-s /some/where/etc.tgz -s /some/where/xetc.tgz
or like this:
mkdir /tmp/temproot
cd /tmp/temproot
tar -xpzf /some/where/etc.tgz
tar -xpzf /some/where/xetc.tgz
etcupdate-s /tmp/temproot
You have modified only few files in the /etc directory so you would like
install most of the updates without being asked. To automatically update
the unmodified configuration files:
etcupdate-a
To get a better idea what's going on, use the -v flag:
etcupdate-v
SEE ALSOcmp(1), more(1), rcs(1), sdiff(1), stty(1), aliases(5), postinstall(8)HISTORY
The etcupdate command appeared in NetBSD 1.6.
In NetBSD 4.0, the -s tgzfile option was added, the -b tempdir option was
converted to -s tgzdir, and the -s srcdir option was changed to refer to
the top of the source directory tree rather than to the etc subdirectory.
In NetBSD 5.0, the ability to specify multiple colon-separated files with
a single -s option was deprecated, and options deprecated in NetBSD 4.0
were removed.
AUTHORS
The script was written by Martti Kuparinen ⟨martti@NetBSD.org⟩ and
improved by several other NetBSD users.
The idea for this script (including code fragments, variable names etc.)
came from the FreeBSD mergemaster (by Douglas Barton). Unlike the
FreeBSD mergemaster, this does not use CVS version tags by default to
compare if the files need to be updated. Files are compared with cmp(1)
as this is more reliable and the only way if the version numbers are the
same even though the files are different.
BUGS
If a source directory is specified via the “-s srcdir” option (or if the
/usr/src directory is used by default), then etcupdate will run “make
distribution” in the etc subdirectory of the source directory, but it
will not use the same options or environment variables that would be used
during a full build of the operating system. For this reason, use of the
“-s srcdir” option is not recommended, and use of the “-s tgzdir” or “-s
tgzfile” options is recommended.
BSD October 4, 2008 BSD
