FBDEV(4)FBDEV(4)NAMEfbdev - video driver for framebuffer device
DESCRIPTIONfbdev is an Xorg driver for framebuffer devices. This is a non-accel‐
erated driver, the following framebuffer depths are supported: 8, 15,
16, 24. All visual types are supported for depth 8, and TrueColor vis‐
ual is supported for the other depths. Multi-head configurations are
The fbdev driver supports all hardware where a framebuffer driver is
available. fbdev uses the os-specific submodule fbdevhw(4) to talk to
the kernel device driver. Currently a fbdevhw module is available for
Please refer to xorg.conf(5) for general configuration details. This
section only covers configuration details specific to this driver.
For this driver it is not required to specify modes in the screen sec‐
tion of the config file. The fbdev driver can pick up the currently
used video mode from the framebuffer driver and will use it if there
are no video modes configured.
For PCI boards you might have to add a BusID line to the Device sec‐
tion. See above for a sample line. You can use " -scanpci" to figure
out the correct values.
The following driver Options are supported:
Option "fbdev" "string"
The framebuffer device to use. Default: /dev/fb0.
Option "ShadowFB" "boolean"
Enable or disable use of the shadow framebuffer layer. Default:
Option "Rotate" "string"
Enable rotation of the display. The supported values are "CW"
(clockwise, 90 degrees), "UD" (upside down, 180 degrees) and
"CCW" (counter clockwise, 270 degrees). Implies use of the
shadow framebuffer layer. Default: off.
SEE ALSOXorg(1), xorg.conf(5), Xserver(1), X(7), fbdevhw(4)AUTHORS
Authors include: Gerd Knorr, Michel Dänzer, Geert Uytterhoeven
X Version 11 xf86-video-fbdev 0.4.0 FBDEV(4)