gzip man page on ElementaryOS

Man page or keyword search:  
man Server   4994 pages
apropos Keyword Search (all sections)
Output format
ElementaryOS logo
[printable version]

GZIP(1)								       GZIP(1)

NAME
       gzip, gunzip, zcat - compress or expand files

SYNOPSIS
       gzip [ -acdfhklLnNrtvV19 ] [--rsyncable] [-S suffix] [ name ...	]
       gunzip [ -acfhklLnNrtvV ] [-S suffix] [ name ...	 ]
       zcat [ -fhLV ] [ name ...  ]

DESCRIPTION
       Gzip  reduces  the  size	 of  the  named	 files using Lempel-Ziv coding
       (LZ77).	Whenever possible, each file  is  replaced  by	one  with  the
       extension .gz, while keeping the same ownership modes, access and modi‐
       fication times.	(The default extension is -gz for VMS,	z  for	MSDOS,
       OS/2  FAT, Windows NT FAT and Atari.)  If no files are specified, or if
       a file name is "-", the standard input is compressed  to	 the  standard
       output.	Gzip will only attempt to compress regular files.  In particu‐
       lar, it will ignore symbolic links.

       If the compressed file name is too long for its file system, gzip trun‐
       cates  it.   Gzip  attempts to truncate only the parts of the file name
       longer than 3 characters.  (A part is delimited by dots.) If  the  name
       consists	 of  small  parts  only,  the longest parts are truncated. For
       example, if file names are limited to 14 characters, gzip.msdos.exe  is
       compressed to gzi.msd.exe.gz.  Names are not truncated on systems which
       do not have a limit on file name length.

       By default, gzip keeps the original file name and timestamp in the com‐
       pressed	file.  These  are used when decompressing the file with the -N
       option. This is useful when the compressed file name was	 truncated  or
       when the time stamp was not preserved after a file transfer.

       Compressed  files  can be restored to their original form using gzip -d
       or gunzip or zcat.  If the original name saved in the  compressed  file
       is not suitable for its file system, a new name is constructed from the
       original one to make it legal.

       gunzip takes a list of files on its command line and replaces each file
       whose  name ends with .gz, -gz, .z, -z, or _z (ignoring case) and which
       begins with the correct magic number with an uncompressed file  without
       the  original extension.	 gunzip also recognizes the special extensions
       .tgz and .taz as shorthands for .tar.gz and .tar.Z respectively.	  When
       compressing, gzip uses the .tgz extension if necessary instead of trun‐
       cating a file with a .tar extension.

       gunzip can currently decompress files created by gzip,  zip,  compress,
       compress	 -H  or pack.  The detection of the input format is automatic.
       When using the first two formats, gunzip checks a 32 bit CRC. For  pack
       and gunzip checks the uncompressed length. The standard compress format
       was not designed to allow consistency checks. However gunzip  is	 some‐
       times  able  to	detect	a bad .Z file. If you get an error when uncom‐
       pressing a .Z file, do not assume that the .Z file  is  correct	simply
       because the standard uncompress does not complain. This generally means
       that the standard uncompress does not check its input, and happily gen‐
       erates  garbage	output.	  The  SCO compress -H format (lzh compression
       method) does not include a CRC but also allows some consistency checks.

       Files created by zip can be uncompressed by gzip only if	 they  have  a
       single  member  compressed with the 'deflation' method. This feature is
       only intended to help conversion of tar.zip files to the tar.gz format.
       To  extract  a zip file with a single member, use a command like gunzip
       <foo.zip or gunzip -S .zip foo.zip.  To extract zip files with  several
       members, use unzip instead of gunzip.

       zcat  is	 identical  to	gunzip	-c.   (On  some	 systems,  zcat may be
       installed as gzcat to preserve the original link	 to  compress.)	  zcat
       uncompresses either a list of files on the command line or its standard
       input and writes the uncompressed data on standard output.   zcat  will
       uncompress files that have the correct magic number whether they have a
       .gz suffix or not.

       Gzip uses the Lempel-Ziv algorithm used in zip and PKZIP.   The	amount
       of  compression	obtained depends on the size of the input and the dis‐
       tribution of common substrings.	Typically, text such as source code or
       English	is  reduced  by	 60-70%.  Compression is generally much better
       than that achieved by LZW (as used in  compress),  Huffman  coding  (as
       used in pack), or adaptive Huffman coding (compact).

       Compression  is	always	performed,  even  if  the  compressed  file is
       slightly larger than the original. The worst case expansion  is	a  few
       bytes  for  the	gzip  file header, plus 5 bytes every 32K block, or an
       expansion ratio of 0.015% for large files. Note that the actual	number
       of  used	 disk blocks almost never increases.  gzip preserves the mode,
       ownership and timestamps of files when compressing or decompressing.

OPTIONS
       -a --ascii
	      Ascii text mode: convert end-of-lines using  local  conventions.
	      This  option  is	supported  only	 on some non-Unix systems. For
	      MSDOS, CR LF is converted to LF when compressing, and LF is con‐
	      verted to CR LF when decompressing.

       -c --stdout --to-stdout
	      Write  output on standard output; keep original files unchanged.
	      If there are several input  files,  the  output  consists	 of  a
	      sequence	of  independently compressed members. To obtain better
	      compression, concatenate	all  input  files  before  compressing
	      them.

       -d --decompress --uncompress
	      Decompress.

       -f --force
	      Force compression or decompression even if the file has multiple
	      links or the corresponding file already exists, or if  the  com‐
	      pressed data is read from or written to a terminal. If the input
	      data is not in a format recognized by gzip, and  if  the	option
	      --stdout	is  also  given, copy the input data without change to
	      the standard output: let zcat behave  as	cat.   If  -f  is  not
	      given,  and  when not running in the background, gzip prompts to
	      verify whether an existing file should be overwritten.

       -h --help
	      Display a help screen and quit.

       -k --keep
	      Keep (don't delete) input files during compression or decompres‐
	      sion.

       -l --list
	      For each compressed file, list the following fields:

		  compressed size: size of the compressed file
		  uncompressed size: size of the uncompressed file
		  ratio: compression ratio (0.0% if unknown)
		  uncompressed_name: name of the uncompressed file

	      The  uncompressed size is given as -1 for files not in gzip for‐
	      mat, such as compressed .Z files. To get the  uncompressed  size
	      for such a file, you can use:

		  zcat file.Z | wc -c

	      In  combination  with the --verbose option, the following fields
	      are also displayed:

		  method: compression method
		  crc: the 32-bit CRC of the uncompressed data
		  date & time: time stamp for the uncompressed file

	      The compression methods currently supported  are	deflate,  com‐
	      press,  lzh  (SCO	 compress  -H)	and pack.  The crc is given as
	      ffffffff for a file not in gzip format.

	      With --name, the uncompressed name,  date and  time   are	 those
	      stored within the compress file if present.

	      With  --verbose,	the  size totals and compression ratio for all
	      files is also displayed, unless some  sizes  are	unknown.  With
	      --quiet, the title and totals lines are not displayed.

       -L --license
	      Display the gzip license and quit.

       -n --no-name
	      When  compressing,  do  not save the original file name and time
	      stamp by default. (The original name is always saved if the name
	      had  to  be  truncated.)	When decompressing, do not restore the
	      original file name if present (remove only the gzip suffix  from
	      the  compressed  file name) and do not restore the original time
	      stamp if present (copy it from the compressed file). This option
	      is the default when decompressing.

       -N --name
	      When  compressing,  always  save the original file name and time
	      stamp; this is the  default.  When  decompressing,  restore  the
	      original	file  name  and	 time stamp if present. This option is
	      useful on systems which have a limit on file name length or when
	      the time stamp has been lost after a file transfer.

       -q --quiet
	      Suppress all warnings.

       -r --recursive
	      Travel  the  directory structure recursively. If any of the file
	      names specified on the command line are directories,  gzip  will
	      descend  into  the directory and compress all the files it finds
	      there (or decompress them in the case of gunzip ).

       --rsyncable
	      While compressing, synchronize the output occasionally based  on
	      the  input.   This  increases  size  by less than 1 percent most
	      cases, but means that the rsync(1) program can take advantage of
	      similarities  in	the  uncompressed  input when syncronizing two
	      files compressed with this flag.	gunzip cannot tell the differ‐
	      ence between a compressed file created with this option, and one
	      created without it.

       -S .suf --suffix .suf
	      When compressing, use suffix .suf instead of .gz.	 Any non-empty
	      suffix  can  be given, but suffixes other than .z and .gz should
	      be avoided to avoid confusion  when  files  are  transferred  to
	      other systems.

	      When  decompressing,  add	 .suf  to the beginning of the list of
	      suffixes to try, when deriving an output file name from an input
	      file name.

       -t --test
	      Test. Check the compressed file integrity.

       -v --verbose
	      Verbose. Display the name and percentage reduction for each file
	      compressed or decompressed.

       -V --version
	      Version. Display the version number and compilation options then
	      quit.

       -# --fast --best
	      Regulate	the  speed of compression using the specified digit #,
	      where -1 or --fast  indicates  the  fastest  compression	method
	      (less  compression)  and -9 or --best indicates the slowest com‐
	      pression method (best  compression).   The  default  compression
	      level is -6 (that is, biased towards high compression at expense
	      of speed).

ADVANCED USAGE
       Multiple compressed files can be concatenated.  In  this	 case,	gunzip
       will extract all members at once. For example:

	     gzip -c file1  > foo.gz
	     gzip -c file2 >> foo.gz

       Then

	     gunzip -c foo

       is equivalent to

	     cat file1 file2

       In  case of damage to one member of a .gz file, other members can still
       be recovered (if the damaged member is removed). However, you  can  get
       better compression by compressing all members at once:

	     cat file1 file2 | gzip > foo.gz

       compresses better than

	     gzip -c file1 file2 > foo.gz

       If you want to recompress concatenated files to get better compression,
       do:

	     gzip -cd old.gz | gzip > new.gz

       If a compressed file consists of several members, the uncompressed size
       and  CRC reported by the --list option applies to the last member only.
       If you need the uncompressed size for all members, you can use:

	     gzip -cd file.gz | wc -c

       If you wish to create a single archive file with	 multiple  members  so
       that members can later be extracted independently, use an archiver such
       as tar or zip. GNU tar supports the -z option to invoke gzip  transpar‐
       ently. gzip is designed as a complement to tar, not as a replacement.

ENVIRONMENT
       The  environment	 variable  GZIP	 can hold a set of default options for
       gzip.  These options are interpreted first and can  be  overwritten  by
       explicit command line parameters. For example:
	     for sh:	GZIP="-8v --name"; export GZIP
	     for csh:	setenv GZIP "-8v --name"
	     for MSDOS: set GZIP=-8v --name

       On  Vax/VMS, the name of the environment variable is GZIP_OPT, to avoid
       a conflict with the symbol set for invocation of the program.

SEE ALSO
       znew(1), zcmp(1), zmore(1), zforce(1), gzexe(1), zip(1), unzip(1), com‐
       press(1)

       The gzip file format is specified in P. Deutsch, GZIP file format spec‐
       ification version 4.3, <http://www.ietf.org/rfc/rfc1952.txt>,  Internet
       RFC  1952  (May	1996).	 The  zip  deflation format is specified in P.
       Deutsch, DEFLATE Compressed  Data  Format  Specification	 version  1.3,
       <http://www.ietf.org/rfc/rfc1951.txt>, Internet RFC 1951 (May 1996).

DIAGNOSTICS
       Exit  status  is normally 0; if an error occurs, exit status is 1. If a
       warning occurs, exit status is 2.

       Usage: gzip [-cdfhklLnNrtvV19] [-S suffix] [file ...]
	      Invalid options were specified on the command line.

       file: not in gzip format
	      The file specified to gunzip has not been compressed.

       file: Corrupt input. Use zcat to recover some data.
	      The compressed file has been damaged. The data up to  the	 point
	      of failure can be recovered using

		    zcat file > recover

       file: compressed with xx bits, can only handle yy bits
	      File  was	 compressed  (using  LZW) by a program that could deal
	      with more bits than the decompress code on this machine.	Recom‐
	      press  the file with gzip, which compresses better and uses less
	      memory.

       file: already has .gz suffix -- no change
	      The file is assumed to be already compressed.  Rename  the  file
	      and try again.

       file already exists; do you wish to overwrite (y or n)?
	      Respond  "y"  if you want the output file to be replaced; "n" if
	      not.

       gunzip: corrupt input
	      A SIGSEGV violation was detected which usually  means  that  the
	      input file has been corrupted.

       xx.x% Percentage of the input saved by compression.
	      (Relevant only for -v and -l.)

       -- not a regular file or directory: ignored
	      When  the input file is not a regular file or directory, (e.g. a
	      symbolic link, socket, FIFO, device file), it is left unaltered.

       -- has xx other links: unchanged
	      The input file has links; it is left unchanged.  See  ln(1)  for
	      more information. Use the -f flag to force compression of multi‐
	      ply-linked files.

CAVEATS
       When writing compressed data to a tape, it is  generally	 necessary  to
       pad  the	 output	 with  zeroes up to a block boundary. When the data is
       read and the whole block is passed to gunzip for decompression,	gunzip
       detects	that there is extra trailing garbage after the compressed data
       and emits a warning by default. You have to use the --quiet  option  to
       suppress	 the  warning.	This option can be set in the GZIP environment
       variable as in:
	 for sh:  GZIP="-q"  tar -xfz --block-compress /dev/rst0
	 for csh: (setenv GZIP -q; tar -xfz --block-compr /dev/rst0

       In the above example, gzip is invoked implicitly by the	-z  option  of
       GNU  tar. Make sure that the same block size (-b option of tar) is used
       for reading and	writing	 compressed  data  on  tapes.	(This  example
       assumes you are using the GNU version of tar.)

BUGS
       The  gzip  format  represents the input size modulo 2^32, so the --list
       option reports incorrect uncompressed sizes and compression ratios  for
       uncompressed  files  4 GB and larger.  To work around this problem, you
       can use the following command to discover a large  uncompressed	file's
       true size:

	     zcat file.gz | wc -c

       The  --list  option reports sizes as -1 and crc as ffffffff if the com‐
       pressed file is on a non seekable media.

       In some rare cases, the --best option gives worse compression than  the
       default	compression  level  (-6). On some highly redundant files, com‐
       press compresses better than gzip.

COPYRIGHT NOTICE
       Copyright © 1998, 1999, 2001, 2002, 2012 Free Software Foundation, Inc.
       Copyright © 1992, 1993 Jean-loup Gailly

       Permission is granted to make and distribute verbatim  copies  of  this
       manual  provided	 the  copyright	 notice and this permission notice are
       preserved on all copies.

       Permission is granted to copy and distribute modified versions of  this
       manual  under  the  conditions  for verbatim copying, provided that the
       entire resulting derived work is distributed under the terms of a  per‐
       mission notice identical to this one.

       Permission  is granted to copy and distribute translations of this man‐
       ual into another language, under the above conditions for modified ver‐
       sions,  except  that this permission notice may be stated in a transla‐
       tion approved by the Foundation.

				     local			       GZIP(1)
[top]

List of man pages available for ElementaryOS

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net