man-pages man page on Raspbian

Man page or keyword search:  
man Server   8174 pages
apropos Keyword Search (all sections)
Output format
Raspbian logo
[printable version]

MAN-PAGES(7)		   Linux Programmer's Manual		  MAN-PAGES(7)

NAME
       man-pages - conventions for writing Linux man pages

SYNOPSIS
       man [section] title

DESCRIPTION
       This  page describes the conventions that should be employed when writ‐
       ing man pages for the Linux man-pages project, which comprises Sections
       2, 3, 4, 5, and 7 of the Linux manual pages.  The conventions described
       on this page may also be useful for authors writing man pages for other
       projects.

   Sections of the Manual Pages
       The manual Sections are traditionally defined as follows:

       1 Commands (Programs)
		 Those commands that can be executed by the user from within a
		 shell.

       2 System calls
		 Those functions which must be performed by the kernel.

       3 Library calls
		 Most of the libc functions.

       4 Special files (devices)
		 Files found in /dev.

       5 File formats and conventions
		 The format for /etc/passwd and other human-readable files.

       6 Games

       7 Conventions and miscellaneous
		 Overviews of various topics, conventions and protocols, char‐
		 acter set standards, and miscellaneous other things.

       8 System management commands
		 Commands like mount(8), many of which only root can execute.

   Macro package
       New  manual  pages  should be marked up using the groff an.tmac package
       described in man(7).  This choice is mainly for consistency:  the  vast
       majority	 of  existing  Linux  manual  pages  are marked up using these
       macros.

   Conventions for source file layout
       Please limit source code line length to no more than about  75  charac‐
       ters  wherever  possible.   This helps avoid line-wrapping in some mail
       clients when patches are submitted inline.

       New sentences should be started on new lines.  This makes it easier  to
       see the effect of patches, which often operate at the level of individ‐
       ual sentences.

   Title line
       The first command in a man page should be a TH command:

	      .TH title section date source manual

       where:

	      title	The title of the man page, written in all caps	(e.g.,
			MAN-PAGES).

	      section	The  section  number  in  which the man page should be
			placed (e.g., 7).

	      date	The date of the last revision  —  remember  to	change
			this  every  time  a  change  is made to the man page,
			since this is the most general way  of	doing  version
			control.  Dates should be written in the form YYYY-MM-
			DD.

	      source	The source of the command, function, or system call.

			For those few man-pages pages in  Sections  1  and  8,
			probably you just want to write GNU.

			For system calls, just write Linux.  (An earlier prac‐
			tice was to write the version  number  of  the	kernel
			from  which the manual page was being written/checked.
			However, this was never done consistently, and so  was
			probably  worse	 than  including  no  version  number.
			Henceforth, avoid including a version number.)

			For library calls that are part of glibc or one of the
			other  common  GNU  libraries, just use GNU C Library,
			GNU, or an empty string.

			For Section 4 pages, use Linux.

			In cases of doubt, just write Linux, or GNU.

	      manual	The title of the manual (e.g., for  Section  2	and  3
			pages in the man-pages package, use Linux Programmer's
			Manual).

   Sections within a manual page
       The list below shows conventional or suggested sections.	  Most	manual
       pages  should include at least the highlighted sections.	 Arrange a new
       manual page so that sections are placed in the order shown in the list.

	    NAME
	    SYNOPSIS
	    CONFIGURATION      [Normally only in Section 4]
	    DESCRIPTION
	    OPTIONS	       [Normally only in Sections 1, 8]
	    EXIT STATUS	       [Normally only in Sections 1, 8]
	    RETURN VALUE       [Normally only in Sections 2, 3]
	    ERRORS	       [Typically only in Sections 2, 3]
	    ENVIRONMENT
	    FILES
	    VERSIONS	       [Normally only in Sections 2, 3]
	    CONFORMING TO
	    NOTES
	    BUGS
	    EXAMPLE
	    SEE ALSO

       Where a traditional heading would apply, please use it;	this  kind  of
       consistency  can	 make  the  information	 easier to understand.	If you
       must, you can create your own headings if they make  things  easier  to
       understand  (this  can be especially useful for pages in Sections 4 and
       5).  However, before doing this, consider whether  you  could  use  the
       traditional  headings,  with  some  subsections (.SS) within those sec‐
       tions.

       The following list elaborates on the contents of each of the above sec‐
       tions.

       NAME	     The  name	of this manual page.  See man(7) for important
		     details of the line(s) that should follow	the  .SH  NAME
		     command.

       SYNOPSIS	     briefly  describes	 the  command or function's interface.
		     For commands, this shows the syntax of  the  command  and
		     its  arguments  (including options); boldface is used for
		     as-is text and italics are used to	 indicate  replaceable
		     arguments.	  Brackets  ([])  surround optional arguments,
		     vertical bars (|) separate choices,  and  ellipses	 (...)
		     can  be  repeated.	  For functions, it shows any required
		     data declarations or #include directives, followed by the
		     function declaration.

		     Where  a  feature	test macro must be defined in order to
		     obtain the declaration of a function (or a variable) from
		     a header file, then the SYNOPSIS should indicate this, as
		     described in feature_test_macros(7).

       CONFIGURATION Configuration details for a device.   This	 section  nor‐
		     mally only appears in Section 4 pages.

       DESCRIPTION   gives  an	explanation  of what the program, function, or
		     format does.  Discuss how it  interacts  with  files  and
		     standard  input,  and what it produces on standard output
		     or standard error.	  Omit	internals  and	implementation
		     details  unless  they're  critical	 for understanding the
		     interface.	 Describe the usual case; for  information  on
		     command-line  options  of	a program use the OPTIONS sec‐
		     tion.

       OPTIONS	     describes the command-line options accepted by a  program
		     and  how  they  change its behavior.  This section should
		     only appear for Section 1 and 8 manual pages.

       EXIT STATUS   lists the possible exit status values of  a  program  and
		     the  conditions  that  cause these values to be returned.
		     This section should only appear for Section 1 and 8  man‐
		     ual pages.

       RETURN VALUE  For  Section  2 and 3 pages, this section gives a list of
		     the values the library routine will return to the	caller
		     and   the	conditions  that  cause	 these	values	to  be
		     returned.

       ERRORS	     For Section 2 and 3 manual pages, this is a list  of  the
		     values  that  may	be  placed in errno in the event of an
		     error, along with information  about  the	cause  of  the
		     errors.  The error list should be in alphabetical order.

       ENVIRONMENT   lists  all	 environment variables that affect the program
		     or function and how they affect it.

       FILES	     lists the files the program or  function  uses,  such  as
		     configuration files, startup files, and files the program
		     directly operates on.  Give the full  pathname  of	 these
		     files,  and  use  the  installation process to modify the
		     directory part to match user preferences.	For many  pro‐
		     grams,   the   default   installation   location	is  in
		     /usr/local,  so  your  base  manual   page	  should   use
		     /usr/local as the base.

       VERSIONS	     A	brief  summary	of  the Linux kernel or glibc versions
		     where a system call  or  library  function	 appeared,  or
		     changed  significantly  in	 its  operation.  As a general
		     rule, every new interface should include a VERSIONS  sec‐
		     tion  in  its  manual page.  Unfortunately, many existing
		     manual pages don't include this information (since	 there
		     was  no policy to do so when they were written).  Patches
		     to remedy this are welcome, but, from the perspective  of
		     programmers  writing  new code, this information probably
		     only matters in the case of kernel interfaces  that  have
		     been  added  in  Linux  2.4 or later (i.e., changes since
		     kernel 2.2), and library functions that have  been	 added
		     to	 glibc	since  version	2.1 (i.e., changes since glibc
		     2.0).

		     The syscalls(2) manual  page  also	 provides  information
		     about kernel versions in which various system calls first
		     appeared.

       CONFORMING TO describes any standards or conventions that relate to the
		     function  or command described by the manual page.	 For a
		     page in Section 2 or 3,  this  section  should  note  the
		     POSIX.1  version(s)  that	the call conforms to, and also
		     whether the call is specified in C99.  (Don't  worry  too
		     much  about  other standards like SUS, SUSv2, and XPG, or
		     the SVr4 and 4.xBSD implementation standards, unless  the
		     call  was	specified in those standards, but isn't in the
		     current version of POSIX.1.)  (See standards(7).)

		     If the call is not governed by any standards but commonly
		     exists  on	 other	systems,  note	them.	If the call is
		     Linux-specific, note this.

		     If this section consists of  just	a  list	 of  standards
		     (which  it	 commonly  does),  terminate  the  list with a
		     period ('.').

       NOTES	     provides miscellaneous notes.  For Section 2  and	3  man
		     pages  you may find it useful to include subsections (SS)
		     named Linux Notes and Glibc Notes.

       BUGS	     lists limitations, known defects or  inconveniences,  and
		     other questionable activities.

       EXAMPLE	     provides  one  or more examples describing how this func‐
		     tion, file or command is used.  For  details  on  writing
		     example programs, see Example Programs below.

       AUTHORS	     lists authors of the documentation or program.  Use of an
		     AUTHORS section is strongly discouraged.	Generally,  it
		     is	 better not to clutter every page with a list of (over
		     time potentially numerous) authors; if you write or  sig‐
		     nificantly amend a page, add a copyright notice as a com‐
		     ment in the source file.  If you  are  the	 author	 of  a
		     device  driver and want to include an address for report‐
		     ing bugs, place this under the BUGS section.

       SEE ALSO	     provides a comma-separated list  of  related  man	pages,
		     ordered  by  section  number  and	then alphabetically by
		     name, possibly followed by other related pages  or	 docu‐
		     ments.  Do not terminate this with a period.

   Font conventions
       For  functions,	the arguments are always specified using italics, even
       in the SYNOPSIS section, where the rest of the function is specified in
       bold:

	   int myfunction(int argc, char **argv);

       Variable names should, like argument names, be specified in italics.

       Filenames   (whether   pathnames,   or	references  to	files  in  the
       /usr/include directory) are always in italics (e.g., <stdio.h>), except
       in  the	SYNOPSIS  section,  where  included  files  are in bold (e.g.,
       #include <stdio.h>).  When referring to a standard include  file	 under
       /usr/include,  specify the header file surrounded by angle brackets, in
       the usual C way (e.g., <stdio.h>).

       Special macros, which are usually in upper case,	 are  in  bold	(e.g.,
       MAXINT).	 Exception: don't boldface NULL.

       When  enumerating  a  list  of error codes, the codes are in bold (this
       list usually uses the .TP macro).

       Complete commands should, if long, be written as in an indented line on
       their own, for example

	   man 7 man-pages

       If the command is short, then it can be included inline in the text, in
       italic format, for example, man 7 man-pages.  In this case, it  may  be
       worth  using  nonbreaking  spaces ("\ ") at suitable places in the com‐
       mand.  Command options should be written in italics, e.g., -l.

       Expressions, if not written on a	 separate  indented  line,  should  be
       specified  in  italics.	 Again,	 the  use of nonbreaking spaces may be
       appropriate if the expression is inlined with normal text.

       Any reference to the subject of the current manual page should be writ‐
       ten with the name in bold.  If the subject is a function (i.e., this is
       a Section 2 or 3 page), then the name should be followed by a  pair  of
       parentheses  in	Roman (normal) font.  For example, in the fcntl(2) man
       page, references to the subject	of  the	 page  would  be  written  as:
       fcntl().	 The preferred way to write this in the source file is:

	   .BR fcntl ()

       (Using  this format, rather than the use of "\fB...\fP()" makes it eas‐
       ier to write tools that parse man page source files.)

       Any reference to another man page should be written with	 the  name  in
       bold,  always  followed by the section number, formatted in Roman (nor‐
       mal) font, without any separating spaces (e.g.,	intro(2)).   The  pre‐
       ferred way to write this in the source file is:

	   .BR intro (2)

       (Including  the	section	 number	 in  cross  references lets tools like
       man2html(1) create properly hyperlinked pages.)

   Spelling
       Starting with release 2.59, man-pages follows American spelling conven‐
       tions;  please  write all new pages and patches according to these con‐
       ventions.

   Example Programs and Shell Sessions
       Manual pages can include example programs demonstrating how  to	use  a
       system call or library function.	 However, note the following:

       *  Example programs should be written in C.

       *  An  example  program is only necessary and useful if it demonstrates
	  something beyond what can easily be provided in a  textual  descrip‐
	  tion	of  the interface.  An example program that does nothing other
	  than call an interface usually serves little purpose.

       *  Example programs should be fairly short (preferably  less  than  100
	  lines; ideally less than 50 lines).

       *  Example  programs  should  do	 error checking after system calls and
	  library function calls.

       *  Example programs should be complete, and  compile  without  warnings
	  when compiled with cc -Wall.

       *  Where possible and appropriate, example programs should allow exper‐
	  imentation, by varying their behavior based on inputs (ideally  from
	  command-line arguments, or alternatively, via input read by the pro‐
	  gram).

       *  Example programs should be  laid  out	 according  to	Kernighan  and
	  Ritchie  style, with 4-space indents.	 (Avoid the use of TAB charac‐
	  ters in source code!)

       For some examples of  what  example  programs  should  look  like,  see
       wait(2) and pipe(2).

       If  you	include	 a shell session demonstrating the use of a program or
       other system feature, boldface the user input text, to  distinguish  it
       from output produced by the system.

   Indentation of structure definitions, shell session logs, etc.
       When  structure	definitions,  shell session logs, etc. are included in
       running text, indent them by  4	spaces	(i.e.,	a  block  enclosed  by
       .in +4n and .in).

EXAMPLE
       For canonical examples of how man pages in the man-pages package should
       look, see pipe(2) and fcntl(2).

SEE ALSO
       man(1), man2html(1), groff(7), groff_man(7), man(7), mdoc(7)

COLOPHON
       This page is part of release 3.27 of the Linux  man-pages  project.   A
       description  of	the project, and information about reporting bugs, can
       be found at http://www.kernel.org/doc/man-pages/.

Linux				  2008-10-28			  MAN-PAGES(7)
[top]

List of man pages available for Raspbian

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net