math_error man page on Archlinux

Man page or keyword search:  
man Server   11224 pages
apropos Keyword Search (all sections)
Output format
Archlinux logo
[printable version]

MATH_ERROR(7)		   Linux Programmer's Manual		 MATH_ERROR(7)

NAME
       math_error - detecting errors from mathematical functions

SYNOPSIS
       #include <math.h>
       #include <errno.h>
       #include <fenv.h>

DESCRIPTION
       When  an	 error	occurs,	 most  library functions indicate this fact by
       returning a special value (e.g., -1 or NULL).  Because  they  typically
       return  a floating-point number, the mathematical functions declared in
       <math.h> indicate an error  using  other	 mechanisms.   There  are  two
       error-reporting	mechanisms:  the  older	 one sets errno; the newer one
       uses the floating-point exception  mechanism  (the  use	of  feclearex‐
       cept(3) and fetestexcept(3), as outlined below) described in fenv(3).

       A portable program that needs to check for an error from a mathematical
       function should set errno to zero, and make the following call

	   feclearexcept(FE_ALL_EXCEPT);

       before calling a mathematical function.

       Upon return from the mathematical function, if errno is nonzero, or the
       following call (see fenv(3)) returns nonzero

	   fetestexcept(FE_INVALID | FE_DIVBYZERO | FE_OVERFLOW |
			FE_UNDERFLOW);

       then an error occurred in the mathematical function.

       The  error  conditions  that  can  occur for mathematical functions are
       described below.

   Domain error
       A domain error occurs when a mathematical function is supplied with  an
       argument whose value falls outside the domain for which the function is
       defined (e.g., giving a negative argument to log(3)).   When  a	domain
       error  occurs,  math functions commonly return a NaN (though some func‐
       tions return a different value in this case); errno is set to EDOM, and
       an "invalid" (FE_INVALID) floating-point exception is raised.

   Pole error
       A  pole	error  occurs when the mathematical result of a function is an
       exact infinity (e.g., the logarithm of 0 is negative infinity).	When a
       pole  error  occurs,  the function returns the (signed) value HUGE_VAL,
       HUGE_VALF, or HUGE_VALL, depending on whether the function result  type
       is double, float, or long double.  The sign of the result is that which
       is mathematically correct for the function.  errno is  set  to  ERANGE,
       and  a  "divide-by-zero"	 (FE_DIVBYZERO)	 floating-point	 exception  is
       raised.

   Range error
       A range error occurs when the magnitude of the  function	 result	 means
       that  it cannot be represented in the result type of the function.  The
       return value of the function depends on whether the range error was  an
       overflow or an underflow.

       A  floating  result overflows if the result is finite, but is too large
       to represented in the result type.  When an overflow occurs, the	 func‐
       tion  returns the value HUGE_VAL, HUGE_VALF, or HUGE_VALL, depending on
       whether the function result type is  double,  float,  or	 long  double.
       errno  is set to ERANGE, and an "overflow" (FE_OVERFLOW) floating-point
       exception is raised.

       A floating result underflows if the result is too small	to  be	repre‐
       sented  in  the	result	type.	If an underflow occurs, a mathematical
       function typically returns 0.0 (C99 says a function  shall  return  "an
       implementation-defined  value  whose  magnitude	is no greater than the
       smallest normalized positive number in the specified type").  errno may
       be  set	to  ERANGE,  and  an  "overflow" (FE_UNDERFLOW) floating-point
       exception may be raised.

       Some functions deliver a range error if the supplied argument value, or
       the  correct function result, would be subnormal.  A subnormal value is
       one that is nonzero, but with a magnitude that  is  so  small  that  it
       can't  be presented in normalized form (i.e., with a 1 in the most sig‐
       nificant bit of the significand).  The representation  of  a  subnormal
       number will contain one or more leading zeros in the significand.

NOTES
       The  math_errhandling  identifier  specified by C99 and POSIX.1-2001 is
       not supported by glibc.	This identifier is supposed to indicate	 which
       of the two error-notification mechanisms (errno, exceptions retrievable
       via fettestexcept(3)) is in use.	 The standards require that  at	 least
       one  be	in use, but permit both to be available.  The current (version
       2.8) situation under glibc is messy.   Most  (but  not  all)  functions
       raise  exceptions on errors.  Some also set errno.  A few functions set
       errno, but don't raise an exception.  A very few functions do  neither.
       See the individual manual pages for details.

       To  avoid the complexities of using errno and fetestexcept(3) for error
       checking, it is often advised that one should  instead  check  for  bad
       argument	 values	 before	 each  call.   For example, the following code
       ensures that log(3)'s argument is not a NaN and is  not	zero  (a  pole
       error) or less than zero (a domain error):

	   double x, r;

	   if (isnan(x) || islessequal(x, 0)) {
	       /* Deal with NaN / pole error / domain error */
	   }

	   r = log(x);

       The  discussion on this page does not apply to the complex mathematical
       functions (i.e., those declared by <complex.h>), which in  general  are
       not required to return errors by C99 and POSIX.1-2001.

       The  gcc(1)  -fno-math-errno  option  causes  the  executable to employ
       implementations of some mathematical functions that are faster than the
       standard	 implementations,  but do not set errno on error.  (The gcc(1)
       -ffast-math option also enables -fno-math-errno.)  An error  can	 still
       be tested for using fetestexcept(3).

SEE ALSO
       gcc(1),	errno(3),  fenv(3),  fpclassify(3), INFINITY(3), isgreater(3),
       matherr(3), nan(3)

       info libc

COLOPHON
       This page is part of release 3.65 of the Linux  man-pages  project.   A
       description  of	the project, and information about reporting bugs, can
       be found at http://www.kernel.org/doc/man-pages/.

Linux				  2008-08-11			 MATH_ERROR(7)
[top]

List of man pages available for Archlinux

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net