MYSQL-TEST-RUN()MYSQL-TEST-RUN()NAMEmysql-test-run.pl - run MySQL test suite
SYNOPSISmysql-test-run.pl [options]
DESCRIPTION
The mysql-test-run.pl Perl script is the main application used to run
the MySQL test suite. It invokes mysqltest to run individual test
cases. (Prior to MySQL 4.1, a similar shell script, mysql-test-run, can
be used instead.)
Invoke mysql-test-run.pl in the mysql-test directory like this:
shell> mysql-test-run.pl [options] [test_name] ...
Each test_name argument names a test case. The test case file that
corresponds to the test name is t/test_name.test.
For each test_name argument, mysql-test-run.pl runs the named test
case. With no test_name arguments, mysql-test-run.pl runs all .test
files in the t subdirectory.
If no suffix is given for the test name, a suffix of .test is assumed.
Any leading path name is ignored. These commands are equivalent:
shell> mysql-test-run.pl mytest
shell> mysql-test-run.pl mytest.test
shell> mysql-test-run.pl t/mytest.test
As of MySQL 5.1.23, a suite name can be given as part of the test name.
That is, the syntax for naming a test is:
[suite_name.]test_name[.suffix]
If a suite name is given, mysql-test-run.pl looks in that suite for the
test. With no suite name, mysql-test-run.pl looks in the default list
of suites for a match and runs the test in any suites where it finds
the test. Suppose that the default suite list is main, binlog, rpl, and
that a test mytest.test exists in the main and rpl suites. With an
argument of mytest or mytest.test, mysql-test-run.pl will run
mytest.test from the main and rpl suites.
To run a family of test cases for which the names share a common
prefix, use the --do-test=prefix option. For example, --do-test=rpl
runs the replication tests (test cases that have names beginning with
rpl). --skip-test has the opposite effect of skipping test cases for
which the names share a common prefix.
As of MySQL 5.0.54/5.1.23/6.0.5, the argument for the --do-test and
--skip-test options allows more flexible specification of which tests
to perform or skip. If the argument contains a pattern metacharacter
other than a lone period, it is interpreted as a Perl regular
expression and applies to test names that match the pattern. If the
argument contains a lone period or does not contain any pattern
metacharacters, it is interpreted the same way as previously and
matches test names that begin with the argument value. For example,
--do-test=testa matches tests that begin with testa,
--do-test=main.testa matches tests in the main test suite that begin
with testa, and --do-test=main.*testa matches test names that contain
main followed by testa with anything in between. In the latter case,
the pattern match is not anchored to the beginning of the test name, so
it also matches names such as xmainytestz.
To perform setup prior to running tests, mysql-test-run.pl needs to
invoke mysqld with the --bootstrap and --skip-grant-tables options (see
Typical configure Options[1]). If MySQL was configured with the
--disable-grant-options option, --bootstrap, --skip-grant-tables, and
--init-file will be disabled. To handle this, set the MYSQLD_BOOTSTRAP
environment variable to the full path name of a server that has all
options enabled. mysql-test-run.pl will use that server to perform
setup; it is not used to run the tests.
The init_file test will fail if --init-file is disabled. This is an
expected failure that can be handled as follows:
shell> export MYSQLD_BOOTSTRAP
shell> MYSQLD_BOOTSTRAP=/full/path/to/mysqld
shell> make test force="--skip-test=init_file"
To run mysql-test-run.pl on Windows, you´ll need either Cygwin or
ActiveState Perl to run it. You may also need to install the modules
required by the script. To run the test script, change location into
the mysql-test directory, set the MTR_VS_CONFIG environment variable to
the configuration you selected earlier (or use the --vs-config option),
and invoke mysql-test-run.pl. For example (using Cygwin and the bash
shell):
shell> cd mysql-test
shell> export MTR_VS_CONFIG=debug
shell> ./mysqltest-run.pl --force --timer
shell> ./mysqltest-run.pl --force --timer --ps-protocol
If you have a copy of mysqld running on the machine where you want to
run the test suite, you do not have to stop it, as long as it is not
using ports 9306 or 9307. If either of those ports is taken, you should
set the MTR_BUILD_THREAD environment variable to an appropriate value,
and the test suite will use a different set of ports for master, slave,
NDB, and Instance Manager). For example:
shell> export MTR_BUILD_THREAD=31
shell> ./mysql-test-run.pl [options] [test_name]
mysql-test-run.pl defines several environment variables. Some of them
are listed in the following table.
┌─────────────────┬────────────────────────────┐
│Variable │ Meaning │
├─────────────────┼────────────────────────────┤
│MYSQL_TEST │ Path name to mysqltest │
│ │ binary │
├─────────────────┼────────────────────────────┤
│MYSQLTEST_VARDIR │ Path name to the var │
│ │ directory that is used for │
│ │ logs, │
│ │ temporary files, and so │
│ │ forth │
├─────────────────┼────────────────────────────┤
│MYSQLD_BOOTSTRAP │ Full path name to mysqld │
│ │ that has all options │
│ │ enabled │
├─────────────────┼────────────────────────────┤
│MASTER_MYPORT │ ??? │
├─────────────────┼────────────────────────────┤
│MASTER_MYSOCK │ ??? │
└─────────────────┴────────────────────────────┘
Tests sometimes rely on certain environment variables being defined.
For example, certain tests assume that MYSQL_TEST is defined so that
mysqltest can invoke itself with exec $MYSQL_TEST.
mysql-test-run.pl supports the options in the following list. An
argument of -- tells mysql-test-run.pl not to process any following
arguments as options. (A description of differences between the options
supported by mysql-test-run.pl and mysql-test-run appears following the
list.)
· --help, -h
Display a help message and exit.
· --bench
Run the benchmark suite.
· --benchdir=path
The directory where the benchmark suite is located. The default
path is ../../mysql-bench.
· --big-test
Pass the --big-test option to mysqltest.
· --check-testcases
Check test cases for side effects.
· --client-bindir
The path to the directory where client binaries are located. This
option was added in MySQL 5.0.66/5.1.27.
· --client-ddd
Start mysqltest in the ddd debugger.
· --client-debugger
Start mysqltest in the named debugger.
· --client-gdb
Start mysqltest in the gdb debugger.
· --client-libdir
The path to the directory where client libraries are located. This
option was added in MySQL 5.0.66/5.1.27.
· --combination=value
Extra options to pass to mysqld. The value should consist of one or
more comma-separated mysqld options. This option is similar to
--mysqld but should be given two or more times. mysql-test-run.pl
executes multiple test runs, using the options for each instance of
--combination in successive runs. If --combination is given only
once, it has no effect. For test runs specific to a given test
suite, an alternative to the use of --combination is to create a
combinations file in the suite directory. The file should contain a
section of options for each test run. See Section 4.9, “Passing
Options from mysql-test-run.pl to mysqld or mysqltest”.
This option was added in MySQL 5.1.23/6.0.4.
· --comment=str
Write str to the output.
· --compress
Compress all information sent between the client and the server if
both support compression.
· --cursor-protocol
Pass the --cursor-protocol option to mysqltest (implies
--ps-protocol).
· --ddd
Start mysqld in the ddd debugger.
· --debug
Dump trace output for all clients and servers.
· --debugger
Start mysqld using the named debugger.
· --debug-sync-timeout=N
Controls whether the Debug Sync facility for testing and debugging
is enabled. The option value is a timeout in seconds. The default
value is 300. A value of 0 disables Debug Sync. The value of this
option also becomes the default timeout for individual
synchronization points.
mysql-test-run.pl passes --loose-debug-sync-timeout=N to mysqld.
The --loose prefix is used so that mysqld does not fail if Debug
Sync is not compiled in.
For information about using the Debug Sync facility for testing,
see Section 4.14, “Thread Synchronization in Test Cases”.
This option was added in MySQL 5.4.4/6.0.6.
· --do-test=prefix
Run all test cases having a name that begins with the given prefix
value. This option provides a convenient way to run a family of
similarly named tests.
As of MySQL 5.0.54/5.1.23/6.0.5, the argument for the --do-test
option allows more flexible specification of which tests to
perform. If the argument contains a pattern metacharacter other
than a lone period, it is interpreted as a Perl regular expression
and applies to test names that match the pattern. If the argument
contains a lone period or does not contain any pattern
metacharacters, it is interpreted the same way as previously and
matches test names that begin with the argument value. For example,
--do-test=testa matches tests that begin with testa,
--do-test=main.testa matches tests in the main test suite that
begin with testa, and --do-test=main.*testa matches test names that
contain main followed by testa with anything in between. In the
latter case, the pattern match is not anchored to the beginning of
the test name, so it also matches names such as xmainytestz.
· --embedded-server
Use a version of mysqltest built with the embedded server.
· --experimental=file_name
Specify a file that contains a list of test cases that should be
displayed with the [ exp-fail ] code rather than [ fail ] if they
fail. This option was added in MySQL 5.1.33/6.0.11.
· --extern
Use an already running server.
Note: If a test case has an .opt file that requires the server to
be restarted with specific options, the file will not be used. The
test case likely will fail as a result.
· --fast
Do not clean up from earlier test runs.
· --force
Normally, mysql-test-run.pl exits if a test case fails. --force
causes execution to continue regardless of test case failure.
· --gcov
Run tests with the gcov test coverage tool.
· --gdb
Start mysqld in the gdb debugger.
· --gprof
Run tests with the gprof profiling tool.
· --im-mysqld1-port
TCP/IP port number to use for the first mysqld, controlled by
Instance Manager.
· --im-mysqld2-port
TCP/IP port number to use for the second mysqld, controlled by
Instance Manager.
· --im-port
TCP/IP port number to use for mysqld, controlled by Instance
Manager.
· --log-warnings
Pass the --log-warnings option to mysqld.
· --manual-debug
Use a server that has already been started by the user in a
debugger.
· --manual-gdb
Use a server that has already been started by the user in the gdb
debugger.
· --master-binary=path
Specify the path of the mysqld binary to use for master servers.
· --master_port=port_num
Specify the TCP/IP port number for the first master server to use.
Observe that the option name has an underscore and not a dash.
· --mem
Run the test suite in memory, using tmpfs or ramdisk. This can
decrease test times significantly. mysql-test-run.pl attempts to
find a suitable location using a built-in list of standard
locations for tmpfs and puts the var directory there. This option
also affects placement of temporary files, which are created in
var/tmp.
The default list includes /dev/shm. You can also enable this option
by setting the environment variable MTR_MEM[=dir_name]. If dir_name
is given, it is added to the beginning of the list of locations to
search, so it takes precedence over any built-in locations.
This option was added in MySQL 4.1.22, 5.0.30, and 5.1.13.
· --mysqld=value
Extra options to pass to mysqld. The value should consist of one or
more comma-separated mysqld options. See Section 4.9, “Passing
Options from mysql-test-run.pl to mysqld or mysqltest”.
· --mysqltest=value
Extra options to pass to mysqltest. The value should consist of one
or more comma-separated mysqltest options. See Section 4.9,
“Passing Options from mysql-test-run.pl to mysqld or mysqltest”.
This option was added in MySQL 6.0.6.
· --ndb-connectstring=str
Pass --ndb-connectstring=str to the master MySQL server. This
option also prevents mysql-test-run.pl from starting a cluster. It
is assumed that there is already a cluster running to which the
server can connect with the given connectstring.
· --ndb-connectstring-slave=str
Pass --ndb-connectstring=str to slave MySQL servers. This option
also prevents mysql-test-run.pl from starting a cluster. It is
assumed that there is already a cluster running to which the server
can connect with the given connectstring.
· --ndb-extra-test
Unknown.
· --ndbcluster-port=port_num, --ndbcluster_port=port_num
Specify the TCP/IP port number that NDB Cluster should use.
· --ndbcluster-port-slave=port_num
Specify the TCP/IP port number that the slave NDB Cluster should
use.
· --netware
Run mysqld with options needed on NetWare.
· --notimer
Cause mysqltest not to generate a timing file.
· --ps-protocol
Pass the --ps-protocol option to mysqltest.
· --record
Pass the --record option to mysqltest. This option requires a
specific test case to be named on the command line.
· --reorder
Reorder tests to minimize the number of server restarts needed.
· --report-features
Display the output of SHOW ENGINES and SHOW VARIABLES. This can be
used to verify that binaries are built with all required features.
This option was added in MySQL 4.1.23, 5.0.30, and 5.1.14.
· --script-debug
Enable debug output for mysql-test-run.pl itself.
· --skip-im
Do not start Instance Manager; skip Instance Manager test cases.
· --skip-master-binlog
Do not enable master server binary logging.
· --skip-ndbcluster, --skip-ndb
Do not start NDB Cluster; skip Cluster test cases.
· --skip-ndbcluster-slave, --skip-ndb-slave
Do not start an NDB Cluster slave.
· --skip-rpl
Skip replication test cases.
· --skip-slave-binlog
Do not enable master server binary logging.
· --skip-ssl
Do not start mysqld with support for SSL connections.
· --skip-test=regex
Specify a regular expression to be applied to test case names.
Cases with names that match the expression are skipped. tests to
skip.
As of MySQL 5.0.54/5.1.23/6.0.5, the argument for the --skip-test
option allows more flexible specification of which tests to skip.
If the argument contains a pattern metacharacter other than a lone
period, it is interpreted as a Perl regular expression and applies
to test names that match the pattern. See the description of the
--do-test option for details.
· --skip-*
--skip-* options not otherwise recognized by mysql-test-run.pl are
passed to the master server.
· --slave-binary=path
Specify the path of the mysqld binary to use for slave servers.
· --slave_port=port_num
Specify the TCP/IP port number for the first master server to use.
Observe that the option name has an underscore and not a dash.
· --sleep=N
Pass --sleep=N to mysqltest.
· --small-bench
Run the benchmarks with the --small-tests and --small-tables
options.
· --socket=file_name
For connections to localhost, the Unix socket file to use, or, on
Windows, the name of the named pipe to use.
· --sp-protocol
Pass the --sp-protocol option to mysqltest.
· --ssl
If mysql-test-run.pl is started with the --ssl option, it sets up a
secure conection for all test cases. In this case, if mysqld does
not support SSL, mysql-test-run.pl exits with an error message:
Couldn´t find support for SSL
· --start
Initialize and start servers with the startup settings for the
first specified test case. For example:
shell> cd mysql-test
shell> ./mysql-test-run.pl --start alias &
This option was added in MySQL 5.1.32/6.0.11.
· --start-and-exit
Initialize and start servers with the startup settings for the
specified test case or cases, if any, and then exit. You can use
this option to start a server to which you can connect later. For
example, after building a source distribution you can start a
server and connect to it with the mysql client like this:
shell> cd mysql-test
shell> ./mysql-test-run.pl --start-and-exit
shell> ../mysql -S ./var/tmp/master.sock -h localhost -u root
· --start-dirty
Start servers (without initialization) for the specified test case
or cases, if any, and then exit. You can then manually run the test
cases.
· --start-from=test_name
mysql-test-run.pl sorts the list of names of the test cases to be
run, and then begins with test_name.
· --strace-client
Create strace output for mysqltest.
· --stress
Run the stress test. The other --stress-xxx options apply in this
case.
· --stress-init-file=file_name
file_name is the location of the file that contains the list of
tests. The default file is stress_init.txt in the test suite
directory.
· --stress-loop-count=N
In sequential stress-test mode, the number of loops to execute
before exiting.
· --stress-mode=mode
This option indicates the test order in stress-test mode. The mode
value is either random to select tests in random order or seq to
run tests in each thread in the order specified in the test list
file. The default mode is random.
· --stress-suite=suite_name
The name of the test suite to use for stress testing. The default
suite name is main (the regular test suite located in the
mysql-test directory).
· --stress-test-count=N
For stress testing, the number of tests to execute before exiting.
· --stress-test-duration=N
For stress testing, the duration of stress testing in seconds.
· --stress-test-file=file_name
The file that contains the list of tests to use in stress testing.
The tests should be named without the .test extension. The default
file is stress_tests.txt in the test suite directory.
· --stress-threads=N
The number of threads to use in stress testing. The default is 5.
· --suite=suite_name
Run the named test suite. The default name is main (the regular
test suite located in the mysql-test directory).
· --suite-timeout=minutes
Specify the maximum test suite runtime.
· --testcase-timeout
Specify the maximum test case runtime.
· --timer
Cause mysqltest to generate a timing file. The default file is
named ./var/log/timer.
· --tmpdir=path
The directory where temporary file are stored. The default location
is ./var/tmp.
· --unified-diff, --udiff
Use unified diff format when presenting differences between
expected and actual test case results.
· --use-old-data
Do not install the test databases. (Use existing ones.)
· --user-test=val
Unused.
· --user=user_name
The MySQL user name to use when connecting to the server.
· --valgrind
Run mysqltest and mysqld with valgrind.
· --valgrind-all
Like --valgrind, but passes the --verbose and --show-reachable
options to valgrind.
· --valgrind-mysqltest
Run mysqltest with valgrind.
· --valgrind-mysqltest-all
Like --valgrind-mysqltest, but passes the --verbose and
--show-reachable options to valgrind.
· --valgrind-options=str
Extra options to pass to valgrind.
· --valgrind-path=path
Specify the path name to the valgrind executable.
· --vardir=path
Specify the path where files generated during the test run are
stored. The default location is ./var.
· --view-protocol
Pass the --view-protocol option to mysqltest.
· --vs-config=config_val
Specify the configuration used to build MySQL (for example,
--vs-config=debug --vs-config=release). This option is for Windows
only. It is available as of MySQL 4.1.23, 5.0.30, and 5.1.14.
· --wait-timeout=N
Unused?
· --warnings
This option is a synonym for --log-warnings.
· --with-ndbcluster
Use NDB Cluster and enable test cases that require it.
· --with-ndbcluster-all
Use NDB Cluster in all tests.
· --with-ndbcluster-only
Run only test cases that have ndb in their name.
· --with-ndbcluster-slave
Unknown.
· --with-openssl
This option is a synonym for --ssl.
Note
mysql-test-run supports the following options not supported by
mysql-test-run.pl: --local, --local-master, --ndb-verbose,
--ndb_mgm-extra-opts, --ndb_mgmd-extra-opts, --ndbd-extra-opts,
--old-master, --purify, --use-old-data, --valgrind-mysqltest-all.
Conversely, mysql-test-run.pl supports the following options not
supported by mysql-test-run: --benchdir, --check-testcases,
--client-ddd, --client-debugger, --cursor-protocol, --debugger,
--im-mysqld1-port, --im-mysqld2-port, --im-port, --manual-debug,
--netware, --notimer, --reorder, --script-debug, --skip-im,
--skip-ssl, --sp-protocol, --start-dirty, --suite, --suite-timeout,
--testcase-timeout, --udiff, --unified-diff,, --valgrind-path,
--vardir, --view-protocol.
COPYRIGHT
Copyright 2007-2008 MySQL AB, 2009 Sun Microsystems, Inc.
This documentation is free software; you can redistribute it and/or
modify it only under the terms of the GNU General Public License as
published by the Free Software Foundation; version 2 of the License.
This documentation is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License along
with the program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or see
http://www.gnu.org/licenses/.
NOTES
1. Typical configure Options
http://dev.mysql.com/doc/refman/5.1/en/configure-options.html
SEE ALSO
For more information, please refer to the MySQL Reference Manual, which
may already be installed locally and which is also available online at
http://dev.mysql.com/doc/.
AUTHOR
Sun Microsystems, Inc. (http://www.mysql.com/).
MYSQL-TEST-RUN()