PERLUTS(1) Perl Programmers Reference Guide PERLUTS(1)NAMEperluts - Perl under UTS
This document can be read as is: as README.uts, or you can read it
after you build your package using "man perluts".
The purpose is to help you build Perl for UTS, which, if you follow
these instructions, should be easy, and result in a solidly working
Perl 5.7.2 (Developmental) or Perl 5.8.x (forthcoming) for UTS
BUILDING PERL ON UTS
NOTE: Some sites have redefined the way uname works, and if yours does
this, special steps must be taken so that Configure can recognize your
system as a UTS system. To see if you are in this category, issue the
command "uname -a". It should look something like:
uts juno 4 4.4 9672 370
At any rate, the first field should be "uts". If this is not the case;
supposing it is, say telcoUTS, create a script, uts/uname (i.e. uname,
in the subdirectory "uts" of the main Perl source dir):
/usr/bin/uname "$@" | sed -e 's/^telcoUTS/uts/'
and when you execute Configure, do it as below, except for adding
PATH=uts:$PATH as a prefix. I.e. do:
PATH=uts:$PATH ./Configure ...
There is no need to do an interactive configure, just type
./Configure -de [-Dusedevel] [-Doptimize=-g ] 2>&1 | tee Conf.out
"-Dusedevel" may be required to configure Perl 5.7.2 non-interactively.
Use -Doptimize=-g if you want to run Perl under sdb or gdb, OR if you
want to be able to use the -D command line flags to perl, which are
occasionally useful in debugging perl scripts.
In this and the following steps, the "2>&1 | tee XXX.out" records all
output from the process, which will be useful if anything unexpected
Then do the compilation with
make 2>&1 | tee make.out
Finally, test using
make test 2>&1 | tee make-test.out
In the output, the only failures you should see should look like:
lib/Math/BigInt/t/bigfltpm.........Use of uninitialized value ...
FAILED at test 57
lib/Math/BigInt/t/bigintpm.........FAILED at test 204
lib/Math/BigInt/t/mbimbf...........Use of uninitialized value ...
Illegal division by zero at ../lib/Math/BigInt/Calc.pm line 314.
FAILED at test 71
FAILED at test 250
lib/Net/servent....................FAILED at test 0
This means that everything passes except for some problems in the
packages "Math::BigInt", "Math::Complex", and "Math::Trig". The
lib/Net/servent failure seems to be a bug in the test program. To
confirm this, from the main Perl source dir, do:
LD_LIBRARY_PATH=`pwd` ./perl -Ilib lib/Net/servent.t
and it should output
Installing the built perl on UTS
Run the command "make install"
UTS Global LLC
perl v5.12.2 2010-09-05 PERLUTS(1)