POOLSTAT(1M)POOLSTAT(1M)NAMEpoolstat - report active pool statistics
SYNOPSISpoolstat [-p pool-list] [-r rset-list] [-T u | d ] [interval [count]]
poolstat [-p pool-list] [-o format -r rset-list]
[-T u | d ] [interval [count]]
DESCRIPTION
The poolstat utility iteratively examines all active pools on the sys‐
tem. It reports statistics based on the selected output mode. poolstat
provides options to examine only specified pools and report resource
set-specific statistics.
Without options, poolstat examines all pools, reports basic statistics
for their resource sets, and exits.
DISPLAY FORMATS
In default output format, poolstat outputs a header line and a line for
each pool. The line begins with the pool ID and its name, followed by a
column of statistical data for the processor set attached to the pool.
The columns are defined as follows:
id
Pool ID.
pool
Pool name.
rid
Resource set id.
rset
Resource set name.
type
Resource set type.
min
Minimum resource set size.
max
Maximum resource set size.
size
Current resource set size.
used
The measure of how much of the resource set is currently is
use. This is calculated as the percentage utilization of the
resource set multiplied by its size. If resource set has been
reconfigured during last sampling interval, this value might be
not reported (-).
load
The absolute representation of the load that is put on the
resource set. For the definition of this property see
libpool(3LIB).
OPTIONS
The following options are supported:
-o format
Report statistics according to the format specification
given in format. See DISPLAY FORMATS.
The -o option accepts lists as arguments. Items in a
list can be either separated by commas or enclosed in
quotes and separated by commas or spaces.
You can specify multiple -o options. The format speci‐
fication is interpreted as the whitespace separated
concatenation of all the format option arguments.
The -o option must be used in conjunction with the -r
option.
-p pool-list
Report only pools whose names are in the given list. If
the -r option is also used, this option selects only
resource sets which belong to pools in the given list.
Statistics for pools or resource sets are reported in
the same order in which pool names are listed on the
pool-list. Pool can be specified by name or by ID.
The -p option accepts lists as arguments. Items in a
pool-list can only be separated by spaces.
-r rset-list
Report resource set statistics. If the rset-list argu‐
ment is "all", then all possible resource set types are
selected.
The -r option accepts lists as arguments. Items in a
list can be either separated by commas or enclosed in
quotes and separated by commas or spaces.
The following resource set types are supported:
all
All resource set types
pset
Processor set
-T u | d
Display a time stamp.
Specify u for a printed representation of the internal
representation of time. See time(2). Specify d for
standard date format. See date(1).
OPERANDS
The following operands are supported:
count
The number of times that the statistics are repeated. By
default, poolstat reports statistics only once.
If neither interval nor count are specified, statistics are
reported once. If interval is specified and count is not,
statistics are reported indefinitely.
interval
The sampling interval in seconds.
If neither interval nor count are specified, statistics are
reported once. If interval is specified and count is not,
statistics are reported indefinitely.
EXAMPLES
Example 1 Using poolstat
The following example shows the default output from the poolstat util‐
ity:
% poolstat
pset
id pool size used load
0 pool_default 4 3.6 6.2
1 pool_admin 4 3.3 8.4
Example 2 Reporting Resource Set Statistics
The following example reports resource set statistics.
% poolstat-r pset
id pool type rid rset min max size used load
0 pool_default pset -1 pset_default 1 65K 2 1.2 8.3
1 pool_admin pset 1 pset_admin 1 1 1 0.4 5.2
2 pool_other pset -1 pset_default 1 65K 2 1.2 8.3
Resource sets attached to multiple pools, as pset_default in the exam‐
ple above, are listed multiple times, once for each pool.
Example 3 Restricting the Output to the List of Pools
The following example restricts the output to the list of pools
% poolstat-p pool_default
pset
id pool size used load
0 pool_default 8 5.3 10.3
% poolstat-p 'pool_admin pool_default'
pset
id pool size used load
1 pool_admin 6 4.3 5.3
0 pool_default 2 1.9 2.0
% poolstat-r all -p 'pool_admin pool_default'
id pool type rid rset min max size used load
1 pool_admin pset 1 pset_admin 1 1 1 0.9 2.3
2 pool_default pset -1 pset_default 1 65K 2 2.0 2.0
Example 4 Customizing Output
The following example customizes output:
% poolstat-r -o pool,rset,size,load
pool rset size load
pool_default pset_default 4 4.5
pool_admin pset_admin 4 2.1
EXIT STATUS
The following exit values are returned:
0
Successful completion.
1
An error occurred.
2
Invalid command line options were specified.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
┌───────────────┬─────────────────┐
│ATTRIBUTE TYPE │ ATTRIBUTE VALUE │
├───────────────┼─────────────────┤
│Stability │ Evolving │
└───────────────┴─────────────────┘
SEE ALSOlibpool(3LIB), attributes(5)NOTES
The system ids associated with resources can change after the system
reboots or the resource configuration is altered.
Jun 16, 2009 POOLSTAT(1M)
