SND_VIA8233(4) BSD Kernel Interfaces Manual SND_VIA8233(4)NAMEsnd_via8233 — VIA Technologies VT8233 bridge device driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your
kernel configuration file:
device pcm
device snd_via8233
Alternatively, to load the driver as a module at boot time, place the
following line in loader.conf(5):
snd_via8233_load="YES"
DESCRIPTION
The snd_via8233 bridge driver allows the generic audio driver, sound(4),
to attach to the VIA VT8233 audio devices. These audio chipsets are
integrated in the southbridge on many VIA based motherboards.
HARDWARE
The snd_via8233 driver supports the following audio chipsets:
· VIA VT8233
· VIA VT8233A
· VIA VT8233C
· VIA VT8235
· VIA VT8237
· VIA VT8251
SEE ALSOsound(4)HISTORY
The snd_via8233 device driver first appeared in FreeBSD 4.7.
AUTHORS
This manual page was written by Joel Dahl ⟨joel@FreeBSD.org⟩.
BUGS
The snd_via8233 driver does not support S/PDIF. There is partial support
in the code, so implementing it should be fairly easy if the right hard‐
ware is available.
BSD April 25, 2006 BSD