TGT-ADMIN(8) [FIXME: manual] TGT-ADMIN(8)NAMEtgt-admin - Linux SCSI Target Configuration Tool
SYNOPSIStgt-admin [-e --execute] [--delete <value>] [--offline <value>]
[--ready <value>] [-s --show] [-C --control-port <NNNN>]
[-c --conf <file>] [--ignore-errors] [-f --force]
[-p --pretend] [--dump] [-v --verbose] [-h --help]
DESCRIPTIONtgt-admin is a utility which allows a persistent configuration of
targets and luns. It uses tgtadm commands to create, delete and show
targets.
OPTIONS-e, --execute
Read /etc/tgt/targets.conf and execute tgtadm commands. If the
target already exists, it won´t be processed. See --update.
-d, --delete <value>
Delete all or selected targets. The target will be deleted only if
it´s not used (no initiator is connected to it).
If you want to delete targets which are in use, you have to add the
"--force" flag.
Example usage:
--delete ALL - delete all targets
--delete tid=4 - delete target 4
(target with tid 4)
--delete iqn.2008-08.com.example:some.target
- delete this target
--offline
Put all or selected targets in offline state.
Example usage:
--offline ALL - offline all targets
--offline tid=4 - offline target 4
(target with tid 4)
--offline iqn.2008-08.com.example:some.target
- offline this target
--ready
Put all or selected targets in ready state.
Example usage:
--ready ALL - ready all targets
--ready tid=4 - ready target 4
(target with tid 4)
--ready iqn.2008-08.com.example:some.target
- ready this target
--update <value>
Update all or selected targets. The target will be updated only if
it´s not used (no initiator is connected to it).
If you want to update targets which are in use, you have to add
"--force" flag.
Example usage:
--update ALL - ready all targets
--update tid=4 - ready target 4
(target with tid 4)
--update iqn.2008-08.com.example:some.target
- update this target
-s, --show
Show all the targets.
-C, --control-port <NNNN>
It is possible to run multiple concurrent instances of tgtd on a
host. This argument is used to control which instance the tgt-admin
command will operate on.
-c, --conf <configuration file>
Specify an alternative configuration file instead of
/etc/tgt/target.conf, which is the default.
--ignore-errors
Continue even if tgtadm exits with non-zero code.
-f, --force
Force some operations even if the target is in use.
-p, --pretend
Only print tgtadm options which would be used; don´t execute any
actions. Assumes -v.
--dump
Dump current tgtd configuration. Note: does not include detailed
parameters, like write caching.
-v, --verbose
Increase verbosity (show tgtadm commands used).
-h, --help
Display a list of available options and exit.
FILES
/etc/tgt/targets.conf
Configuration file for tgt-admin.
/usr/share/doc/tgt/targets.conf.example
Example configuration file for tgt-admin.
SEE ALSOtargets.conf(5), tgtd(8), tgtadm(8), tgtimg(8), tgt-setup-lun(8).
http://stgt.sourceforge.net/
REPORTING BUGS
Report bugs to <stgt@vger.kernel.org>
[FIXME: source] 11/21/2013 TGT-ADMIN(8)
