write man page on NetBSD

Man page or keyword search:  
man Server   9087 pages
apropos Keyword Search (all sections)
Output format
NetBSD logo
[printable version]

WRITE(2)		    BSD System Calls Manual		      WRITE(2)

NAME
     write, writev, pwrite, pwritev — write output

LIBRARY
     Standard C Library (libc, -lc)

SYNOPSIS
     #include <unistd.h>

     ssize_t
     write(int d, const void *buf, size_t nbytes);

     ssize_t
     pwrite(int d, const void *buf, size_t nbytes, off_t offset);

     #include <sys/uio.h>

     ssize_t
     writev(int d, const struct iovec *iov, int iovcnt);

     ssize_t
     pwritev(int d, const struct iovec *iov, int iovcnt, off_t offset);

DESCRIPTION
     write() attempts to write nbytes of data to the object referenced by the
     descriptor d from the buffer pointed to by buf.  writev() performs the
     same action, but gathers the output data from the iovcnt buffers speci‐
     fied by the members of the iov array: iov[0], iov[1], ..., iov[iovcnt-1].
     pwrite() and pwritev() perform the same functions, but write to the spec‐
     ified position in the file without modifying the file pointer.

     For writev() and pwritev(), the iovec structure is defined as:

	   struct iovec {
		   void *iov_base;
		   size_t iov_len;
	   };

     Each iovec entry specifies the base address and length of an area in mem‐
     ory from which data should be written.  writev() and pwritev() will
     always write a complete area before proceeding to the next.

     On objects capable of seeking, the write() starts at a position given by
     the pointer associated with d (see lseek(2)).  Upon return from write(),
     the pointer is incremented by the number of bytes which were written.

     Objects that are not capable of seeking always write from the current
     position.	The value of the pointer associated with such an object is
     undefined.

     If the real user is not the super-user, then write() clears the set-user-
     id bit on a file.	This prevents penetration of system security by a user
     who “captures” a writable set-user-id file owned by the super-user.

     If write() succeeds it will update the st_ctime and st_mtime fields of
     the file's meta-data (see stat(2)).

     When using non-blocking I/O on objects such as sockets that are subject
     to flow control, write() and writev() may write fewer bytes than
     requested; the return value must be noted, and the remainder of the oper‐
     ation should be retried when possible.

RETURN VALUES
     Upon successful completion the number of bytes which were written is
     returned.	Otherwise a -1 is returned and the global variable errno is
     set to indicate the error.

ERRORS
     write(), writev(), pwrite(), and pwritev() will fail and the file pointer
     will remain unchanged if:

     [EAGAIN]		The file was marked for non-blocking I/O, and no data
			could be written immediately.

     [EBADF]		d is not a valid descriptor open for writing.

     [EDQUOT]		The user's quota of disk blocks on the file system
			containing the file has been exhausted.

     [EFAULT]		Part of iov or data to be written to the file points
			outside the process's allocated address space.

     [EFBIG]		An attempt was made to write a file that exceeds the
			process's file size limit or the maximum file size.

     [EINTR]		A signal was received before any data could be written
			to a slow device.  See sigaction(2) for more informa‐
			tion on the interaction between signals and system
			calls.

     [EINVAL]		The pointer associated with d was negative; or the
			total length of the I/O is more than can be expressed
			by the ssize_t return value.

     [EIO]		An I/O error occurred while reading from or writing to
			the file system.

     [ENOSPC]		There is no free space remaining on the file system
			containing the file.

     [EPIPE]		An attempt is made to write to a pipe that is not open
			for reading by any process; or an attempt is made to
			write to a socket of type SOCK_STREAM that is not con‐
			nected to a peer socket.

     In addition, writev() and pwritev() may return one of the following
     errors:

     [EINVAL]		iovcnt was less than or equal to 0, or greater than
			{IOV_MAX}; or one of the iov_len values in the iov
			array was negative; or the sum of the iov_len values
			in the iov array overflowed a 32-bit integer.

     The pwrite() and pwritev() calls may also return the following errors:

     [EINVAL]		The specified file offset is invalid.

     [ESPIPE]		The file descriptor is associated with a pipe, socket,
			or FIFO.

SEE ALSO
     fcntl(2), lseek(2), open(2), pipe(2), poll(2), select(2), sigaction(2)

STANDARDS
     The write() function is expected to conform to IEEE Std 1003.1-1988
     (“POSIX.1”).  The writev() and pwrite() functions conform to X/Open
     Portability Guide Issue 4, Version 2 (“XPG4.2”).

HISTORY
     The pwritev() function call appeared in NetBSD 1.4.  The pwrite() func‐
     tion call appeared in AT&T System V Release 4 UNIX.  The writev() func‐
     tion call appeared in 4.2BSD.  The write() function call appeared in
     Version 2 AT&T UNIX.

CAVEATS
     Error checks should explicitly test for -1.  Code such as

	     while ((nr = write(fd, buf, sizeof(buf))) > 0)

     is not maximally portable, as some platforms allow for nbytes to range
     between SSIZE_MAX and SIZE_MAX - 2, in which case the return value of an
     error-free write() may appear as a negative number distinct from -1.
     Proper loops should use

	     while ((nr = write(fd, buf, sizeof(buf))) != -1 && nr != 0)

BSD				 April 3, 2010				   BSD
[top]
                             _         _         _ 
                            | |       | |       | |     
                            | |       | |       | |     
                         __ | | __ __ | | __ __ | | __  
                         \ \| |/ / \ \| |/ / \ \| |/ /  
                          \ \ / /   \ \ / /   \ \ / /   
                           \   /     \   /     \   /    
                            \_/       \_/       \_/ 
More information is available in HTML format for server NetBSD

List of man pages available for NetBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net