Encode::Guess man page on Archlinux

Man page or keyword search:  
man Server   11224 pages
apropos Keyword Search (all sections)
Output format
Archlinux logo
[printable version]

Encode::Guess(3perl)   Perl Programmers Reference Guide	  Encode::Guess(3perl)

       Encode::Guess -- Guesses encoding from data

	 # if you are sure $data won't contain anything bogus

	 use Encode;
	 use Encode::Guess qw/euc-jp shiftjis 7bit-jis/;
	 my $utf8 = decode("Guess", $data);
	 my $data = encode("Guess", $utf8);   # this doesn't work!

	 # more elaborate way
	 use Encode::Guess;
	 my $enc = guess_encoding($data, qw/euc-jp shiftjis 7bit-jis/);
	 ref($enc) or die "Can't guess: $enc"; # trap error this way
	 $utf8 = $enc->decode($data);
	 # or
	 $utf8 = decode($enc->name, $data)

       Encode::Guess enables you to guess in what encoding a given data is
       encoded, or at least tries to.

       By default, it checks only ascii, utf8 and UTF-16/32 with BOM.

	 use Encode::Guess; # ascii/utf8/BOMed UTF

       To use it more practically, you have to give the names of encodings to
       check (suspects as follows).  The name of suspects can either be
       canonical names or aliases.

       CAVEAT: Unlike UTF-(16|32), BOM in utf8 is NOT AUTOMATICALLY STRIPPED.

	# tries all major Japanese Encodings as well
	 use Encode::Guess qw/euc-jp shiftjis 7bit-jis/;

       If the $Encode::Guess::NoUTFAutoGuess variable is set to a true value,
       no heuristics will be applied to UTF8/16/32, and the result will be
       limited to the suspects and "ascii".

	   You can also change the internal suspects list via "set_suspects"

	     use Encode::Guess;
	     Encode::Guess->set_suspects(qw/euc-jp shiftjis 7bit-jis/);

	   Or you can use "add_suspects" method.  The difference is that
	   "set_suspects" flushes the current suspects list while
	   "add_suspects" adds.

	     use Encode::Guess;
	     Encode::Guess->add_suspects(qw/euc-jp shiftjis 7bit-jis/);
	     # now the suspects are euc-jp,shiftjis,7bit-jis, AND
	     # euc-kr,euc-cn, and big5-eten
	     Encode::Guess->add_suspects(qw/euc-kr euc-cn big5-eten/);

       Encode::decode("Guess" ...)
	   When you are content with suspects list, you can now

	     my $utf8 = Encode::decode("Guess", $data);

	   But it will croak if:

	   ·   Two or more suspects remain

	   ·   No suspects left

	   So you should instead try this;

	     my $decoder = Encode::Guess->guess($data);

	   On success, $decoder is an object that is documented in
	   Encode::Encoding.  So you can now do this;

	     my $utf8 = $decoder->decode($data);

	   On failure, $decoder now contains an error message so the whole
	   thing would be as follows;

	     my $decoder = Encode::Guess->guess($data);
	     die $decoder unless ref($decoder);
	     my $utf8 = $decoder->decode($data);

       guess_encoding($data, [, list of suspects])
	   You can also try "guess_encoding" function which is exported by
	   default.  It takes $data to check and it also takes the list of
	   suspects by option.	The optional suspect list is not reflected to
	   the internal suspects list.

	     my $decoder = guess_encoding($data, qw/euc-jp euc-kr euc-cn/);
	     die $decoder unless ref($decoder);
	     my $utf8 = $decoder->decode($data);
	     # check only ascii, utf8 and UTF-(16|32) with BOM
	     my $decoder = guess_encoding($data);

       ·   Because of the algorithm used, ISO-8859 series and other single-
	   byte encodings do not work well unless either one of ISO-8859 is
	   the only one suspect (besides ascii and utf8).

	     use Encode::Guess;
	     # perhaps ok
	     my $decoder = guess_encoding($data, 'latin1');
	     # definitely NOT ok
	     my $decoder = guess_encoding($data, qw/latin1 greek/);

	   The reason is that Encode::Guess guesses encoding by trial and
	   error.  It first splits $data into lines and tries to decode the
	   line for each suspect.  It keeps it going until all but one
	   encoding is eliminated out of suspects list.	 ISO-8859 series is
	   just too successful for most cases (because it fills almost all
	   code points in \x00-\xff).

       ·   Do not mix national standard encodings and the corresponding vendor

	     # a very bad idea
	     my $decoder
		= guess_encoding($data, qw/shiftjis MacJapanese cp932/);

	   The reason is that vendor encoding is usually a superset of
	   national standard so it becomes too ambiguous for most cases.

       ·   On the other hand, mixing various national standard encodings
	   automagically works unless $data is too short to allow for

	    # This is ok if $data is long enough
	    my $decoder =
	     guess_encoding($data, qw/euc-cn
				      euc-jp shiftjis 7bit-jis

       ·   DO NOT PUT TOO MANY SUSPECTS!  Don't you try something like this!

	     my $decoder = guess_encoding($data,

       It is, after all, just a guess.	You should alway be explicit when it
       comes to encodings.  But there are some, especially Japanese,
       environment that guess-coding is a must.	 Use this module with care.

       Encode::Guess does not work on EBCDIC platforms.

       Encode, Encode::Encoding

perl v5.18.2			  2014-01-06		  Encode::Guess(3perl)

List of man pages available for Archlinux

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
Vote for polarhome
Free Shell Accounts :: the biggest list on the net