PerlIO man page on CentOS

Man page or keyword search:  
man Server   8420 pages
apropos Keyword Search (all sections)
Output format
CentOS logo
[printable version]

PerlIO(3pm)	       Perl Programmers Reference Guide		   PerlIO(3pm)

NAME
       PerlIO - On demand loader for PerlIO layers and root of PerlIO::* name
       space

SYNOPSIS
	 open($fh,"<:crlf", "my.txt"); # support platform-native and CRLF text files

	 open($fh,"<","his.jpg");      # portably open a binary file for reading
	 binmode($fh);

	 Shell:
	   PERLIO=perlio perl ....

DESCRIPTION
       When an undefined layer 'foo' is encountered in an "open" or "binmode"
       layer specification then C code performs the equivalent of:

	 use PerlIO 'foo';

       The perl code in PerlIO.pm then attempts to locate a layer by doing

	 require PerlIO::foo;

       Otherwise the "PerlIO" package is a place holder for additional PerlIO
       related functions.

       The following layers are currently defined:

       :unix
	   Lowest level layer which provides basic PerlIO operations in terms
	   of UNIX/POSIX numeric file descriptor calls (open(), read(),
	   write(), lseek(), close()).

       :stdio
	   Layer which calls "fread", "fwrite" and "fseek"/"ftell" etc.	 Note
	   that as this is "real" stdio it will ignore any layers beneath it
	   and got straight to the operating system via the C library as
	   usual.

       :perlio
	   A from scratch implementation of buffering for PerlIO. Provides
	   fast access to the buffer for "sv_gets" which implements perl's
	   readline/<> and in general attempts to minimize data copying.

	   ":perlio" will insert a ":unix" layer below itself to do low level
	   IO.

       :crlf
	   A layer that implements DOS/Windows like CRLF line endings.	On
	   read converts pairs of CR,LF to a single "\n" newline character.
	   On write converts each "\n" to a CR,LF pair.	 Note that this layer
	   likes to be one of its kind: it silently ignores attempts to be
	   pushed into the layer stack more than once.

	   It currently does not mimic MS-DOS as far as treating of Control-Z
	   as being an end-of-file marker.

	   (Gory details follow) To be more exact what happens is this: after
	   pushing itself to the stack, the ":crlf" layer checks all the lay‐
	   ers below itself to find the first layer that is capable of being a
	   CRLF layer but is not yet enabled to be a CRLF layer.  If it finds
	   such a layer, it enables the CRLFness of that other deeper layer,
	   and then pops itself off the stack.	If not, fine, use the one we
	   just pushed.

	   The end result is that a ":crlf" means "please enable the first
	   CRLF layer you can find, and if you can't find one, here would be a
	   good spot to place a new one."

	   Based on the ":perlio" layer.

       :mmap
	   A layer which implements "reading" of files by using "mmap()" to
	   make (whole) file appear in the process's address space, and then
	   using that as PerlIO's "buffer". This may be faster in certain cir‐
	   cumstances for large files, and may result in less physical memory
	   use when multiple processes are reading the same file.

	   Files which are not "mmap()"-able revert to behaving like the
	   ":perlio" layer. Writes also behave like ":perlio" layer as
	   "mmap()" for write needs extra house-keeping (to extend the file)
	   which negates any advantage.

	   The ":mmap" layer will not exist if platform does not support
	   "mmap()".

       :utf8
	   Declares that the stream accepts perl's internal encoding of char‐
	   acters.  (Which really is UTF-8 on ASCII machines, but is UTF-
	   EBCDIC on EBCDIC machines.)	This allows any character perl can
	   represent to be read from or written to the stream. The UTF-X
	   encoding is chosen to render simple text parts (i.e.	 non-accented
	   letters, digits and common punctuation) human readable in the
	   encoded file.

	   Here is how to write your native data out using UTF-8 (or
	   UTF-EBCDIC) and then read it back in.

		   open(F, ">:utf8", "data.utf");
		   print F $out;
		   close(F);

		   open(F, "<:utf8", "data.utf");
		   $in = <F>;
		   close(F);

       :bytes
	   This is the inverse of ":utf8" layer. It turns off the flag on the
	   layer below so that data read from it is considered to be "octets"
	   i.e. characters in range 0..255 only. Likewise on output perl will
	   warn if a "wide" character is written to a such a stream.

       :raw
	   The ":raw" layer is defined as being identical to calling "bin‐
	   mode($fh)" - the stream is made suitable for passing binary data
	   i.e. each byte is passed as-is. The stream will still be buffered.

	   In Perl 5.6 and some books the ":raw" layer (previously sometimes
	   also referred to as a "discipline") is documented as the inverse of
	   the ":crlf" layer. That is no longer the case - other layers which
	   would alter binary nature of the stream are also disabled.  If you
	   want UNIX line endings on a platform that normally does CRLF trans‐
	   lation, but still want UTF-8 or encoding defaults the appropriate
	   thing to do is to add ":perlio" to PERLIO environment variable.

	   The implementation of ":raw" is as a pseudo-layer which when
	   "pushed" pops itself and then any layers which do not declare them‐
	   selves as suitable for binary data. (Undoing :utf8 and :crlf are
	   implemented by clearing flags rather than popping layers but that
	   is an implementation detail.)

	   As a consequence of the fact that ":raw" normally pops layers it
	   usually only makes sense to have it as the only or first element in
	   a layer specification.  When used as the first element it provides
	   a known base on which to build e.g.

	       open($fh,":raw:utf8",...)

	   will construct a "binary" stream, but then enable UTF-8 transla‐
	   tion.

       :pop
	   A pseudo layer that removes the top-most layer. Gives perl code a
	   way to manipulate the layer stack. Should be considered as experi‐
	   mental. Note that ":pop" only works on real layers and will not
	   undo the effects of pseudo layers like ":utf8".  An example of a
	   possible use might be:

	       open($fh,...)
	       ...
	       binmode($fh,":encoding(...)");  # next chunk is encoded
	       ...
	       binmode($fh,":pop");	       # back to un-encoded

	   A more elegant (and safer) interface is needed.

       :win32
	   On Win32 platforms this experimental layer uses native "handle" IO
	   rather than unix-like numeric file descriptor layer. Known to be
	   buggy as of perl 5.8.2.

       Custom Layers

       It is possible to write custom layers in addition to the above builtin
       ones, both in C/XS and Perl.  Two such layers (and one example written
       in Perl using the latter) come with the Perl distribution.

       :encoding
	   Use ":encoding(ENCODING)" either in open() or binmode() to install
	   a layer that does transparently character set and encoding trans‐
	   formations, for example from Shift-JIS to Unicode.  Note that under
	   "stdio" an ":encoding" also enables ":utf8".	 See PerlIO::encoding
	   for more information.

       :via
	   Use ":via(MODULE)" either in open() or binmode() to install a layer
	   that does whatever transformation (for example compression / decom‐
	   pression, encryption / decryption) to the filehandle.  See Per‐
	   lIO::via for more information.

       Alternatives to raw

       To get a binary stream an alternate method is to use:

	   open($fh,"whatever")
	   binmode($fh);

       this has advantage of being backward compatible with how such things
       have had to be coded on some platforms for years.

       To get an un-buffered stream specify an unbuffered layer (e.g. ":unix")
       in the open call:

	   open($fh,"<:unix",$path)

       Defaults and how to override them

       If the platform is MS-DOS like and normally does CRLF to "\n" transla‐
       tion for text files then the default layers are :

	 unix crlf

       (The low level "unix" layer may be replaced by a platform specific low
       level layer.)

       Otherwise if "Configure" found out how to do "fast" IO using system's
       stdio, then the default layers are:

	 unix stdio

       Otherwise the default layers are

	 unix perlio

       These defaults may change once perlio has been better tested and tuned.

       The default can be overridden by setting the environment variable PER‐
       LIO to a space separated list of layers ("unix" or platform low level
       layer is always pushed first).

       This can be used to see the effect of/bugs in the various layers e.g.

	 cd .../perl/t
	 PERLIO=stdio  ./perl harness
	 PERLIO=perlio ./perl harness

       For the various value of PERLIO see "PERLIO" in perlrun.

       Querying the layers of filehandles

       The following returns the names of the PerlIO layers on a filehandle.

	  my @layers = PerlIO::get_layers($fh); # Or FH, *FH, "FH".

       The layers are returned in the order an open() or binmode() call would
       use them.  Note that the "default stack" depends on the operating sys‐
       tem and on the Perl version, and both the compile-time and runtime con‐
       figurations of Perl.

       The following table summarizes the default layers on UNIX-like and DOS-
       like platforms and depending on the setting of the $ENV{PERLIO}:

	PERLIO	   UNIX-like		       DOS-like
	------	   ---------		       --------
	unset / "" unix perlio / stdio [1]     unix crlf
	stdio	   unix perlio / stdio [1]     stdio
	perlio	   unix perlio		       unix perlio
	mmap	   unix mmap		       unix mmap

	# [1] "stdio" if Configure found out how to do "fast stdio" (depends
	# on the stdio implementation) and in Perl 5.8, otherwise "unix perlio"

       By default the layers from the input side of the filehandle is
       returned, to get the output side use the optional "output" argument:

	  my @layers = PerlIO::get_layers($fh, output => 1);

       (Usually the layers are identical on either side of a filehandle but
       for example with sockets there may be differences, or if you have been
       using the "open" pragma.)

       There is no set_layers(), nor does get_layers() return a tied array
       mirroring the stack, or anything fancy like that.  This is not acciden‐
       tal or unintentional.  The PerlIO layer stack is a bit more complicated
       than just a stack (see for example the behaviour of ":raw").  You are
       supposed to use open() and binmode() to manipulate the stack.

       Implementation details follow, please close your eyes.

       The arguments to layers are by default returned in parenthesis after
       the name of the layer, and certain layers (like "utf8") are not real
       layers but instead flags on real layers: to get all of these returned
       separately use the optional "details" argument:

	  my @layer_and_args_and_flags = PerlIO::get_layers($fh, details => 1);

       The result will be up to be three times the number of layers: the first
       element will be a name, the second element the arguments (unspecified
       arguments will be "undef"), the third element the flags, the fourth
       element a name again, and so forth.

       You may open your eyes now.

AUTHOR
       Nick Ing-Simmons <nick@ing-simmons.net>

SEE ALSO
       "binmode" in perlfunc, "open" in perlfunc, perlunicode, perliol, Encode

perl v5.8.8			  2001-09-21			   PerlIO(3pm)
[top]

List of man pages available for CentOS

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net