multilog(8)multilog(8)NAMEmultilog - reads a sequence of lines from stdin and appends selected
lines to any number of logs.
SYNOPSISmultilog script
DESCRIPTION
script consists of any number of arguments. Each argument specifies one
action. The actions are carried out in order for each line of input.
Note that actions may contain shell metacharacters that need to be
quoted when multilog is run from a shell.
multilog exits 0 when it sees the end of stdin. If stdin has a partial
final line then multilog inserts a final newline.
multilog writes a message to stderr and exits 111, without reading any
input, if it runs out of memory or if another multilog process is writ‐
ing to one of the same automatically rotated logs.
If multilog has trouble writing to disk after it starts reading input,
it writes a message to stderr, pauses, and tries again, without losing
any data. Note that this may block any program feeding input to multi‐
log.
If multilog receives a TERM signal, it will read and process data until
the next newline, and then exit, leaving stdin at the first byte of
data it has not processed.
SELECTING LINES
Each line is initially selected. The action
-pattern
deselects the line if pattern matches the line. The action
+pattern
selects the line if pattern matches the line.
pattern is a string of stars and non-stars. It matches any concatena‐
tion of strings matched by all the stars and non-stars in the same
order. A non-star matches itself. A star before the end of pattern
matches any string that does not include the next character in pattern.
A star at the end of pattern matches any string.
For example, the action
+hello
selects hello. It does not select hello world.
The action
-named[*]: Cleaned cache *
deselects named[135]: Cleaned cache of 3121 RRs. The first star matches
any string that does not include a right bracket.
The action
-*
deselects every line.
To save memory, multilog actually checks pattern against only the first
1000 characters of each line.
ALERTS
The action
e prints (the first 200 bytes of) each selected line to stderr.
STATUS FILES
The action
=file replaces the contents of file with (the first 1000 bytes of)
each selected line, padded with newlines to 1001 bytes. There is
no protection of file against power outages.
For example, the sequence of actions
-*
+STAT*
=log/status
maintains log/status as a copy of the most recent line starting with
STAT.
TIMESTAMPING
The action
t inserts an @, a precise timestamp, and a space in front of each
line, using the same format as tai64n(8). This is required to
be the first action.
Patterns apply to the line after the timestamp is inserted. For exam‐
ple, if
multilog t '-*' '+* fatal: *' ./main
reads the line
fatal: out of memory
then it will log a line such as
@400000003b4a39c23294b13c fatal: out of memory
with the first * matching the timestamp.
You can use tai64nlocal(8) to convert these timestamps to human-read‐
able form.
AUTOMATICALLY ROTATED LOGS
If dir starts with a dot or slash then the action
dir appends each selected line to a log named dir. If dir does not
exist, multilog creates it.
The log format is as follows. dir is a directory containing some num‐
ber of old log files, a log file named current, and other files for
multilog to keep track of its actions. Each old log file has a name
beginning with @, continuing with a precise timestamp showing when the
file was finished, and ending with one of the following codes:
.s This file is completely processed and safely written to disk.
.u This file was being created at the moment of an outage. It may
have been truncated and has not been processed.
Beware that NFS, async filesystems, and softupdates filesystems may
discard files that were not safely written to disk before an outage.
While multilog is running, current has mode 644. If multilog sees the
end of stdin, it writes current safely to disk, and sets the mode of
current to 744. When it restarts, it sets the mode of current back to
644 and continues writing new lines.
When multilog decides that current is big enough, it writes current
safely to disk, sets the mode of current to 744, and renames current as
an old log file. The action
ssize sets the maximum file size for subsequent dir actions. multilog
will decide that current is big enough if current has size
bytes. (multilog will also decide that current is big enough if
it sees a newline within 2000 bytes of the maximum file size; it
tries to finish log files at line boundaries.) size must be
between 4096 and 16777215. The default maximum file size is
99999.
In versions 0.75 and above: If multilog receives an ALRM signal,
it immediately decides that current is big enough, if current is
nonempty. The action
nnum sets the number of log files for subsequent dir actions. After
renaming current, if multilog sees num or more old log files, it
removes the old log file with the smallest timestamp. num must
be at least 2. The default number of log files is 10. The action
!processor
sets a processor for subsequent dir actions. multilog will feed
current through processor and save the output as an old log file
instead of current. multilog will also save any output that
processor writes to descriptor 5, and make that output readable
on descriptor 4 when it runs processor on the next log file. For
reliability, processor must exit nonzero if it has any trouble
creating its output; multilog will then run it again. Note that
running processor may block any program feeding input to multi‐
log.
SEE ALSOsupervise(8), svc(8), svok(8), svstat(8), svscanboot(8), svscan(8),
readproctitle(8), fghack(8), pgrphack(8), tai64n(8), tai64nlocal(8),
setuidgid(8), envuidgid(8), envdir(8), softlimit(8), setlock(8)
http://cr.yp.to/daemontools.html
multilog(8)
