if_ural man page on FreeBSD

Man page or keyword search:  
man Server   9747 pages
apropos Keyword Search (all sections)
Output format
FreeBSD logo
[printable version]

URAL(4)			 BSD Kernel Interfaces Manual		       URAL(4)

     ural — Ralink Technology RT2500USB IEEE 802.11 driver

     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device ehci
	   device uhci
	   device ohci
	   device usb
	   device ural
	   device wlan
	   device wlan_amrr

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):


     The ural driver supports USB 2.0 wireless adapters based on the RT2500USB

     The RT2500USB chipset consists of two integrated chips, a RT2570 MAC/BBP
     and a radio transceiver (the model of which depends on the card revi‐

     The RT2522, RT2523, RT2524, RT2525, RT2525e and RT2526 radio transceivers
     operate in the 2.4GHz band (802.11b/g) whereas the RT5222 is a dual-band
     radio transceiver that can operate in the 2.4GHz and 5.2GHz bands

     ural supports station, adhoc, hostap, and monitor mode operation.	Only
     one virtual interface may be configured at any time.  For more informa‐
     tion on configuring this device, see ifconfig(8).

     The ural driver supports USB 2.0 wireless adapters based on the Ralink
     Technology RT2500USB chipset, including:

     Card			  Bus
     AMIT WL532U		  USB
     ASUS WL-167g		  USB
     Belkin F5D7050 v2000	  USB
     Buffalo WLI-U2-KG54-AI	  USB
     CNet CWD-854		  USB
     Compex WLU54G 2A1100	  USB
     Conceptronic C54RU		  USB
     D-Link DWL-G122 b1		  USB
     Dynalink WLG25USB		  USB
     E-Tech WGUS02		  USB
     Gigabyte GN-WBKG		  USB
     Hercules HWGUSB2-54	  USB
     KCORP LifeStyle KLS-685	  USB
     Linksys WUSB54G v4		  USB
     Linksys WUSB54GP v4	  USB
     MSI MS-6861		  USB
     MSI MS-6865		  USB
     MSI MS-6869		  USB
     NovaTech NV-902		  USB
     OvisLink Evo-W54USB	  USB
     SerComm UB801R		  USB
     SparkLAN WL-685R		  USB
     Surecom EP-9001-g		  USB
     Sweex LC100060		  USB
     Tonze UW-6200C		  USB
     Zinwell ZWX-G261		  USB
     Zonet ZEW2500P		  USB

     An up to date list can be found at http://ralink.rapla.net/.

     Join an existing BSS network (i.e., connect to an access point):

	   ifconfig wlan create wlandev ural0 inet \
	       netmask 0xffffff00

     Join a specific BSS network with network name “my_net”:

	   ifconfig wlan create wlandev ural0 ssid my_net up

     Join a specific BSS network with 64-bit WEP encryption:

	   ifconfig wlan create wlandev ural0 ssid my_net \
		   wepmode on wepkey 0x1234567890 weptxkey 1 up

     Join a specific BSS network with 128-bit WEP encryption:

	   ifconfig wlan create wlandev ural0 wlanmode adhoc ssid my_net \
	       wepmode on wepkey 0x01020304050607080910111213 weptxkey 1

     ural%d: device timeout  The driver will reset the hardware.  This should
     not happen.

     intro(4), netintro(4), usb(4), wlan(4), wlan_amrr(4), wlan_ccmp(4),
     wlan_tkip(4), wlan_wep(4), wlan_xauth(4), ifconfig(8), hostapd(8),

     Ralink Technology, http://www.ralinktech.com/.

     The ural driver first appeared in OpenBSD 3.7.

     The original ural driver was written by Damien Bergamini

     Host AP mode doesn't support client power save.  Clients using power save
     mode will experience packet loss (disabling power saving on the client
     will fix this).

BSD				April 13, 2008				   BSD

List of man pages available for FreeBSD

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
Vote for polarhome
Free Shell Accounts :: the biggest list on the net